This document provides information on metal roofing and wall panel systems from IMETCO. It summarizes their products including standing seam roof panels, concealed clip wall panels, soffits, accessories and finishes. It also discusses IMETCO's engineering services, testing, shop drawings and project management support to assist with specification and installation of the metal systems.

1. Metal Solutions for the Building Envelope

4. The IMETCO Value-Add High quality, attractive systems that offer a lifetime of protection Well-established company with decades of proven performance Metal roofing specialists Assist with system design, specifications and field inspections Products made here in Atlanta Reduce freight costs for local jobs Accommodate LEEDs material origin criteria Field support just a phone call away A wide range of high-performance systems Engineered for longevity and incomparable aesthetic appeal Engineering team on staff Provides project-specific shop drawings and design support Specialty manufacturing makes more creative and unique designs possible Curving Tapering Proprietary mechanical finishes On-site fabrication

7. Series 300® Rigorously tested Water-tight Resists hurricane-force winds Ideal for curving and tapering Unlimited thermal movement Custom trim and flashing details available Slopes as little as 1/2:12 A variety of panel widths, materials, gauges and colors Install over open purlins or solid substrate Heavy 16-gauge one-piece clips Factory-applied sealant Mechanically seamed Fully warranted More than 20 years of proven performance Symmetrical design Structural and/or architectural applications

9. Symmetrical Seam Design flexibility Quick and easy to install Start anywhere on the roof and proceed in either direction Modifications Additions can installed with little or no impact to existing structure Reduced waste Both sides of the panel can be used at any place Easy to replace Individual panels can be removed and replaced

12. Curved Panels Design considerations Tightness of radius Slope at ridgeline Water-tightness Steel or aluminum Structural or architectural application Factory or field curving

18. S-Curve Panels from IMETCO Unique specialty curving for structural panels Complex curvatures (change in radius) Concave (reverse) radius Curved to flat S curves (convex to concave)

24. Tapered Panels Conical shaped buildings Most costly manufacturing operation Factory formed Now available in virtually any length

33. Snap-Lok™ 1¾-inch standing seam provides excellent wind uplift resistance Simple one step installation - no seaming tools required Heavy duty 18-gauge UL concealed clips allow thermal movement ⅜-inch clearance between panel and substrate promotes ventilation 10-, 12-, 16-, and 18-inch widths Weather-tight internal gutter/anti-siphon feature Slopes as little as 1½:12 Panel striations - standard Factory-applied sealant Installed over open purlins or solid substrate Available in 22 or 24 gauge steel (including stainless), and .032 aluminum Fully warranted

36. Perm-Loc 1.0 and 1.5 Interlocking standing seam - no separate cap Perm-Loc 1.0 is available in 13- and 21-inch widths Perm-Loc 1.5 is available in 12- and or 18-inch widths Factory-installed sealant in seam Heavy 18-gauge UL approved clips Available in: 1- and 1½-inch seams 22 or 24 gauge G90 galvanized steel 22 gauge AZ55 Galvalume® .032 and .040 aluminum

38. Twin-Loc Mechanically seamed structural design Twin-Loc 1.5 available in 11- and 17-inch widths Twin-Loc 2.0 available in 12-, 16- and 18-inch widths Testing and Approvals UL-580 Class 90 windstorm rating ASTM E-283 air infiltration resistance ASTM E-331 water penetration resistance ASTM E-1592 Available in: 22 and 24 gauge steel .032 and .040 aluminum

40. SS Panels Can be curved or tapered Ideal for change-of-plane detailing Symmetrical design Factory-applied sealant in the seam cap Custom trim and flashing details available 3:12 minimum slope Solid substrate 30 lb. minimum felt underlayment Available in: 14½-inch and 22½-inch panel widths 24 and 22 gauge steel, and .032 aluminum

41. IMETCO Soffit Systems Available in lengths up to 25' Panels can be vented for air circulation Panels are attached with concealed fasteners at 24" maximum on center Available in: .032 aluminum in IMETCO’s standard colors Also available in .025 aluminum in Regal White

42. Latitude Series Wall Panels High-performance exterior metal wall system Provides dynamic visual impact Proven resistance to wind uplift and water infiltration Suitable for horizontal and vertical applications Concealed clips Wide variety of profiles Mix and match for accent Available in 12- and 16-inch coverage Each creates a 4-inch o.c. pattern Precision-edge factory mitered corners available

43. PermWall Flush Wall Panel System High performance flush metal wall panel systems 1.0 and 1.5 Engineered for strength and longevity Designed for the beauty of smooth consistency Concealed fasteners secure virtually invisible vertical seams Tested and warranted to IMETCO’s rigorous performance and quality standards 10-year weather-tight warranty Available in a wide range of colors and gauges Custom-formed by IMETCO’s talented metal craftsmen

44. Concealed Clip Wall Panels PanWall 130 Flush, seamless look Easy one-step installation Installed over solid substrate of furring channels Can be used for curved parapet walls, curved soffits and gable ends 13-inch standard panel width 21-inch width available Distinctive stiffening plateaus Custom insulation adhered to panel Available in 24 gauge steel and .032 aluminum FW-120 Interlocking seams conceal fasteners 12-inch standard panel width, nominal 1-inch depth Profile choices include Smooth, solid surface with no stiffening grooves Two stiffening V-grooves equally spaced Available in 24 gauge steel and .032 aluminum

45. Exposed Fastener Wall Panels Cor-Pan 32-, 35½-, and 37⅜-inch coverage widths Two corrugated panel systems ⅞-inch deep longitudinal ribs, spaced 2.67 inches on center ½-inch deep longitudinal ribs, spaced 2.67 inches on center Available in 22 and 24 gauge steel, and .032 aluminum R-Panel 36-inch coverage width Ribs are 1-3/16 inches deep, and 12 inches on center Available in 22 and 24 gauge steel, and .032 aluminum 7.2 Rib 36-inch coverage width Trapezoidal style 1½-inch longitudinal ribs spaced 7.2 inches on center Available in 22 and 24 gauge steel, and .032 aluminum

46. PerformaEdge Fascia and Coping 10- and 12-foot standard lengths .040, .050, .063 .080 & .125 aluminum, as well as 22 and 24 gauge steel Miters and transitions can be fabricated at any angle to meet specific project conditions Concealed splice plates Unlimited thermal movement Weather-tight seal Pre-punched fastening holes ensure proper, and quick, installation 16-gauge galvanized steel cleat for exceptional uplift performance 20-year blow-off and weather-tight warranties Engineered for performance and maximum wind resistance Creates a seamless, color-matched finished appearance Provides exceptional protection against wind and weather IBC 2003 Code compliant Fully tested per ANSI/SPRI ES-1 standards “Snap-on” design simplifies installation and reduces labor costs

47. DryDek Ice and Water Barrier High temperature commercial-grade underlayment Tolerates 260+°f Resists punctures and tears Resists exposure for 150 days Withstands thermal movement 100% SBS-modified Reinforced with polyester and fiberglass Great for re-roof application! Self-adhering, easy-to-apply Self-sealing around fasteners Remains water-tight under load stress Meets ASTM D-1970 standards FBC-approved Packaged in heavy-duty corrugated box

48. IMETCO Accessories IMETCO offers a wide range of roofing accessories Gravel stops, gutters and downspouts are all formed by our talented craftsmen Matching fasteners are available in any of our standard, premium or designer colors, as well as custom colors Head, hip and valley closures A wide variety of clips Trim Edge stiffeners Snow guards and snow retention systems

49. Materials and Finishes Materials Aluminum Steel Stainless Steel Copper Zinc Exotic Metals Coatings Slow corrosion Enhance aesthetics Mechanical Finishes Mesas, striations, embossing Pencil beads TextureMatteTM stainless steel

50. Onyx Black Glacier Gray United Zinc Lifespan measured in decades The ONLY domestically produced zinc roofing currently available 5-mil plastisol protective back-coating Forms a beautiful natural blue-gray patina Self-healing nature can make scratches disappear over time Non-corrosive and environmentally-friendly Zinc resists mold, mildew & fungus, but its runoff is “clean” High recycled content More than 30% comes from recycled/secondary zinc

51. Color

52. Signature Collection Patterns

55. Engineering Services Experts in metal roofing design, engineering, testing and code compliance IMETCO engineers are ready to assist you at every stage of your project with: Design support and specialty engineering Product testing and code compliance support Custom shop drawing packages and installation guidelines Ongoing research and development Ensures the quality, performance and value of IMETCO's product line

56. Wind Uplift Requirements Design Requirements for Metal Roofing ASCE 7 specifies the standard for determining design loads Establishes proper method for evaluating roofing systems A wind uplift analysis should be conducted to help determine Proper Clip Spacing Gauge of Panel System Width of Panel Panel Profile

57. Wind Uplift Analysis (ASCE 7) Geographic Location Determines expected maximum wind speed Mean Roof Height The higher the roof, the higher the wind pressures Exposure Condition Characteristics of ground surface City centers and suburbs provide more wind shielding than open fields or coastal locations Occupancy Classification Essential facilities (schools, fire departments, hospitals, etc.) are more vital than others Roof Geometry Slope (steep vs. flat) and shape (curved barrel vs. hip & valley) affect wind pressure Other Factors Topography, wall openings, parapets, etc.

58. Testing

60. Shop Drawing Packages Thoroughly engineered and project-specific Produced in-house by IMETCO engineers P.E. stamp available for any state Addresses design and installation challenges Ensures optimum product performance, proper installation and code compliance Reduces potential liability

61. Project Management Assist with each stage of your project Single point of contact for information about your order Can answer any question regarding Panel selection Pricing and quantities Lead times and delivery

63. System Details and Installation

64. Long Panels Convenient and cost beneficial Reduce potential for leaks by eliminating unnecessary end laps Can be factory formed and shipped up to 85 feet long Can be field formed to unlimited length

65. On-Site Roll Forming Full-service, factory-quality forming equipment 16 roll stations Tension leveling Operated on-site by IMETCO fabrication experts Shipped with de-coiler on 45-foot trailer Factory formed battens Factory installed seam sealant UL and FM continuous quality assurance programs

67. On-site Roll Forming IMETCO provides: Operator & assistant (including T&E) Generator 140 ft. spreader bar available for rental Contractor responsibilities: Freight for equipment (both ways), coils, seam caps, and accessories On-site manpower One man per 15’ panel length Flat manufacturing area Panel length plus 60 feet on ground 10,000 lb lift to handle coil and maneuver forming equipment Flexible schedule 2-3 week window to schedule equipment and operators

68. Factory

69. Thank You!