1. Communications Systems | LBC 3483/00 Horn Loudspeaker
LBC 3483/00 Horn Loudspeaker
www.boschsecurity.com
u High efficiency driver
u Excellent speech reproduction
u Provision for inside mounting of the optional line/
loudspeaker supervision board
u Water-and dust protected to IP 65
u EN 54‑24 certified
Bosch high-efficiency horn loudspeakers provide Functions
excellent speech reproduction and sound distribution
for a wide scope of outdoor applications. They are The rear cover on the horn is made from self-
ideal for sports grounds, parks, exhibitions, factories extinguishing ABS (acc. to class UL 94 V0). The
and swimming pools. connection cable is fed out through a cable gland
The LBC 3483/00 is a circular, 35 W horn loudspeaker, (PG 13.5) in rear cover. For loop through connection,
measuring 490 mm (19.6 in) in diameter. They are the rear cover is fitted with a second hole (covered as
made from aluminum. The edges of the horns are standard supplied).
covered with a PVC profile for protection against These integrated horns are also available as separate
impact damage. They are light grey (RAL 7035), and horn and driver, allowing installing any combination of
are water and dust protected. horn and driver. See order information for the type
numbers.
Voice alarm loudspeaker
The LBC 3483/00 is designed for use in voice alarm Certifications and Approvals
systems and is compliant with emergency standards.
The horn loudspeaker has built-in protection to ensure All Bosch loudspeakers are designed to withstand
that, in the event of a fire, damage to the loudspeaker operating at their rated power for 100 hours in
does not result in failure of the circuit to which it is accordance with IEC 268-5 Power Handling Capacity
connected. In this way, system integrity is maintained; (PHC) standards. Bosch has also developed the
ensuring loudspeakers in other areas can still be used Simulated Acoustical Feedback Exposure (SAFE) test
to inform people of the situation. The Horn to demonstrate that they can withstand two times
loudspeaker has a ceramic terminal block, thermal their rated power for short durations. This ensures
fuse and heat resistant, high-temperature wiring. extra reliability under extreme conditions, leading to
They have provision for inside mounting the optional higher customer satisfaction, longer operation life, and
line/loudspeaker supervision boards. much less chance of failure or performance
deterioration.
2. 2 | LBC 3483/00 Horn Loudspeaker
Safety acc. to EN 60065 0
Water and dust protection acc. to IEC 60529, IP 65 1
Emergency acc. to EN 54‑24 / BS 5839‑8 /
EN 60849 1/2
16
Wind‑force acc. to NEN 6702: 2007 + A1: 2008,
Bft11 1/4
Region Certification Circuit diagram
Europe CE 10dB
Poland CNBOP
CNBOP
SPL(dB)
Installation/Configuration Notes 90
Simple Power Setting
The horn has a three-way terminal block with screw 31.5 63 125 250 500 1000 2k 4k 8k 16k
connection (including earth). Three primary taps are Frequency (Hz)
provided on the matching transformer to allow
selection of nominal full-power, half-power or quarter- Frequency response
power radiation (in 3 dB steps). 0˚ 0˚
0
Mounting 30˚ 30˚
The horn loudspeakers are supplied complete with
sturdy adjustable steel mounting brackets, allowing -10
the sound beam to be accurately directed. 60˚ 60˚
-20
90˚ 90˚
-20
120˚ 120˚
-10
150˚
150˚ 0
37
1.45 180˚ 180˚
mm
in
250 Hz 2000 Hz
Dimensions in mm (in)
500 Hz 4000 Hz
204.0 1000 Hz 8000 Hz
8.0
102.0 Polar diagram (measured in pink noise)
4.0
51.0 51.0 3.0
2.0 2.0 0.12
Octave band sensitivity *
37.0 Octave SPL Total octave Total octave
18.5 1.45 1W/1m SPL SPL
0.73 1W/1m Pmax/1m
125 Hz 74.0 - -
10.8 x 3.0 mm 250 Hz 91.7 - -
0.43 x 0.12 in
500 Hz 102.5 - -
Bracket dimensions
1000 Hz 111.3 - -
2000 Hz 106.5
3. 3 | LBC 3483/00 Horn Loudspeaker
4000 Hz 99.9 - - Opening angle 50° / 25°
at 1 kHz/4 kHz (-6 dB)
8000 Hz 92.6 - -
Rated voltage 100 V
A-weighted - 103.5 117.1
Rated impedance 286 ohm
Lin-weighted - 103.4 115.6
Connector Screw terminal block
Octave band opening angles * Technical performance data acc. to IEC 60268-5
Horizontal Vertical Mechanical
125 Hz - - Dimensions (L x Dmax) 499 x 490 mm (20 x 19.6 in)
250 Hz 179 179 Weight 4.5 kg (9.9 lb)
500 Hz 93 93 Color Light grey (RAL 7035)
1000 Hz 55 55 Cable diameter 6 mm to 12 mm
2000 Hz 37 37 (0.24 in to 0.47 in)
4000 Hz 26 26 Environmental
8000 Hz 15 15 Operating temperature -25 ºC to +55 ºC (-13 ºF to
+131 ºF)
Acoustical performance specified per octave
• (all measurements are done with a pink noise signal; Storage temperature -40 ºC to +70 ºC (-40 ºF to
the valuals are in dBSPL) +158 ºF)
Relative humidity <95%
Other parameters are available in CNBOP test report
nr 4787/BA/10.
1438
Bosch Security Systems BV
Kapittelweg 10, 4827 HG Breda, The Netherlands
10
1438-CPD-0191
EN 54-24:2008
Specified active equalization, required for EN54‑24
Loudspeaker for voice alarm systems
Parts Included for fire detection and fire alarm systems for buildings
Horn Loudspeaker 35 W
Quantity Component LBC3483/00
Type B
1 LBC 3483/00 Horn Loudspeaker
1 PG 13.5 cable gland (fitted) Ordering Information
Technical Specifications LBC 3483/00 Horn Loudspeaker
35 W, aluminum, circular
Electrical* Order number LBC3483/00
Maximum power 52.5 W Accessories
Rated power 35 / 17.5 / 8.75 W LBC 3472/00 Driver Unit
25 W, 100 V
Sound pressure level 127 dB / 112 dB (SPL) Order number LBC 3472/00
at 35 W / 1 W (1 kHz, 1 m)
LBC 3473/00 Driver Unit
Effective frequency range (-10 380 Hz to 5 kHz 35 W, 100 V
dB)
Order number LBC 3473/00