4. TB-IC Program
1.
Assign supervisory responsibility and authority
(TB risk assessment, TB-IC policies, training of HCWs)
ďŽ
Train the persons responsible
ďŽ
Designate TB resource person
2.
Develop written TB-IC plan
1.
Prompt recognition and airborne precautions of patients
3.
Conduct problem evaluation
4.
Perform contact investigation
5. TB-IC Program
5.
Collaborate with the health department to
develop administrative controls
5.
6.
Risk assessment, TB-IC plan, patient management,
screening of HCWs, coordination âŚ
Implement environmental controls
5.
AII room âŚ
7.
Implement respiratory-protection program
8.
Perform training and education of HCWs
9.
Plan for accepting patients transferred from
another setting
6. TB Risk assessment
ďŽ
Persons at Highest Risk for Exposure to and
Infection with M. tuberculosis
ďŽ
Persons Whose Condition is at High Risk for
Progression From LTBI to TB Disease
ďŽ
Characteristics of a Patient with TB Disease That
Increase the Risk for Infectiousness
ďŽ
Environmental Factors That Increase the Risk for
Transmission of M. tuberculosis
ďŽ
Risk for Health-CareâAssociated Transmission
of M. tuberculosis
8. Persons at Highest Risk for Exposure
to and Infection with M. tuberculosis
ďŽ
Close contacts â persons who
share the same air space in a
household or other enclosed
environment for a prolonged
period (days or weeks) with a
person with pulmonary TB
disease
ďŽ
Foreign-born persons from
geographic areas with a high
incidence of TB disease
ďŽ
Residents and employees of
congregate settings that are
high risk (e.g., correctional
facilities, long-termâcare
facilities, and homeless
shelters)
ďŽ
HCWs who serve patients who
are at high risk
ďŽ
HCWs with unprotected
exposure to a patient with TB
disease before the identification
and correct airborne
precautions of the patient
ďŽ
Certain populations who are
medically underserved, have
low income, and have an
increased incidence, as defined
locally
ďŽ
Infants, children, and
adolescents exposed to adults
in high-risk categories
9. Persons Whose Condition is at High Risk
for Progression From LTBI to TB Disease
ďŽ
Persons infected with HIV
ďŽ
Persons infected with M.
tuberculosis within the previous
2 years
ďŽ
Persons with any of the
following clinical conditions or
other immunocompromising
conditions
ďŽ
ďŽ
Infants and children aged <4
years
ďŽ
Persons with a history of
untreated or inadequately
treated TB disease, including
persons with chest radiograph
findings consistent with
previous TB disease
ďŽ
Persons who use tobacco or
alcohol, illegal drugs, including
injection drugs and crack
cocaine
silicosis, diabetes mellitus,
chronic renal failure, certain
hematologic disorders
(leukemias and lymphomas),
other specific malignancies
(e.g., carcinoma of the head,
neck, or lung), body weight
âĽ10% below ideal body weight,
prolonged corticosteroid use,
other immunosuppressive
treatments, organ transplant,
end-stage renal disease, and
intestinal bypass or
gastrectomy
10. Characteristics of a Patient with TB Disease
That Increase the Risk for Infectiousness
ďŽ
Presence of cough
ďŽ
ďŽ
Cavitation on chest
radiograph
Failure to cover the mouth
and nose when coughing
ďŽ
Incorrect, lack of, or short
duration of antituberculosis
treatment; and
ďŽ
Undergoing cough-inducing
or aerosol-generating
procedures (e.g.,
bronchoscopy, sputum
induction, and
administration of
aerosolized medications)
ďŽ
Positive acid-fast bacilli
(AFB) sputum smear result
ďŽ
Respiratory tract disease
with involvement of the
larynx
ďŽ
Respiratory tract disease
with involvement of the lung
or pleura
11. Environmental Factors That Increase the
Risk for Transmission of M. tuberculosis
ďŽ
Exposure to TB in small, enclosed spaces
ďŽ
Inadequate local or general ventilation that results in
insufficient dilution or removal of infectious droplet nuclei
ďŽ
Recirculation of air containing infectious droplet nuclei
ďŽ
Inadequate cleaning and disinfection of medical
equipment
ďŽ
Improper procedures for handling specimens
12. Risk for Health-CareâAssociated
Transmission of M. tuberculosis
ďŽ
Setting
ďŽ
Occupational group
ďŽ
Prevalence of TB in the community
ďŽ
Patient population
ďŽ
Effectiveness of TB infection-control Measures
ďŽ
Aerosol-generating procedures
14. Administrative controls
1.
Assigning responsibility for TB-IC in the setting
2.
Conducting a TB risk assessment of the setting
3.
Developing and instituting a written TB-IC plan to ensure
prompt detection, airborne precautions, and treatment of
persons who have suspected or confirmed TB disease
4.
Ensuring the timely availability of recommended
laboratory processing, testing, and reporting of results to
the ordering physician and IC team
5.
Implementing effective work practices for the management
of patients with suspected or confirmed TB disease
15. Administrative controls
6.
Ensuring proper cleaning and sterilization or disinfection
of potentially contaminated equipment
7.
Training and educating HCWs regarding TB, with specific
focus on prevention, transmission, and symptoms
8.
Screening and evaluating HCWs who are at risk for TB
disease or who might be exposed to M. tuberculosis
9.
Applying epidemiologic-based prevention principles,
including the use of setting-related IC data
10.
Using appropriate signage advising respiratory hygiene
and cough etiquette
11.
Coordinating efforts with the local or state health
department
16. Environmental controls
ďŽ
Primary environmental controls
ďŽ
ďŽ
ďŽ
Controlling the source of infection by using local
exhaust ventilation (e.g., hoods, tents, or booths)
Diluting and removing contaminated air by using
general ventilation
Secondary environmental controls
ďŽ
Controlling the airflow to prevent contamination of air
in areas adjacent to the source (AII rooms)
ďŽ
Cleaning the air by using high efficiency particulate
air (HEPA) filtration or UVGI
17.
18.
19.
20.
21.
22.
23.
24.
25. Respiratory-Protection Controls
ďŽ
Implementing a respiratory-protection program
ďŽ
Training HCWs on respiratory protection
ďŽ
Training patients on respiratory hygiene and
cough etiquette procedures
26. TB risk classification
Potential
ongoing
transmission
Medium risk
⢠Settings in which HCWs will possibly be exposed
to persons with TB disease or to clinical specimens
that might contain M. tuberculosis
Low risk
Š Tong Ka Io 2013
⢠Settings in which person-to-person transmission of
M. tuberculosis has occurred during the preceding
year
⢠Settings in which persons with TB disease are not
expected to be encountered
27.
28.
29. Evidence of person-to-person
transmission of M. tuberculosis
ďŽ
Clusters of TST or BAMT conversions
ďŽ
HCW with confirmed TB disease
ďŽ
Increased rates of TST or BAMT conversions
ďŽ
Unrecognized TB disease in patients or HCWs
ďŽ
Recognition of an identical strain of M.
tuberculosis in patients or HCWs with TB
disease identified by DNA fingerprinting
31. Prompt triage â Think TB
ďŽ
Primary TB risk to HCWs is patient with
undiagnosed or unrecognized infectious TB
ďŽ
Promptly initiate AII precautions and manage or
transfer patients with suspected or confirmed TB
ďŽ
Ask about and evaluate for TB
ďŽ
Check for signs and symptoms
ďŽ
Mask symptomatic patients
ďŽ
Separate immunocompromised patients
32.
33.
34. Initiating TB airborne precautions
ďŽ
any patient who has symptoms or signs of TB
disease, or
ďŽ
who has documented infectious TB disease and
has not completed antituberculosis treatment
35. Airborne Infection Isolation (AII) Room
ďŽ
Should be single-patient rooms in which environmental
factors and entry of visitors and HCWs are controlled
ďŽ
All HCWs who enter should wear at least N95 disposable
respirators
ďŽ
Visitors may be offered respiratory protection (i.e., N95)
and should be instructed by HCWs on the use
ďŽ
Have specific requirements for controlled ventilation,
negative pressure, and air filtration
ďŽ
Should have a private bathroom
36.
37.
38.
39.
40.
41. Discontinuing TB airborne precautions
When infectious TB disease is considered unlikely
and either
1.
another diagnosis is made that explains the
clinical syndrome or
2.
the patient has three consecutive, negative AFB
sputum smear results
ďŽ
Each of the three sputum specimens should be
collected in 8â24-hour intervals, and at least one
specimen should be an early morning specimen
42. Discharge to Home with positive AFB
sputum smear results
ďŽ
A specific plan exists for follow-up care with the local TB-control
program
ďŽ
The patient has been started on a standard multidrug
antituberculosis treatment regimen, and DOT has been arranged
ďŽ
No infants and children aged <4 years or persons with
immunocompromising conditions are present in the household
ďŽ
All immunocompetent household members have been previously
exposed to the patient
ďŽ
The patient is willing to not travel outside of the home except for
health-careâassociated visits until the patient has negative
sputum smear results
43. Return to work criteria for
symptomatic individuals
ďŽ
TB disease is ruled out based on physical exam, chest xray, and bacteriology (if indicated); or
ďŽ
TB disease is diagnosed and treated, and the individual is
determined to be non-infectious as defined below:
ďŽ
Had three negative AFB sputum smears obtained 8-24
hours apart, with at least one being an early morning
specimen; and
ďŽ
Responded to antituberculosis treatment that will probably
be effective, based on susceptibility results; and
ďŽ
Had been determined to be noninfectious by a physician
knowledgeable and experienced in managing TB disease.
44. Managing TB Patients: Considerations
for Special Settings
Settings in Which Patients with Suspected or Confirmed Infectious Tuberculosis (TB) Disease are not Expected to be Encountered
Setting
Administrative Controls
Triage only: Initial evaluation of â˘
patients who will transfer to
another setting
â˘
â˘
Environmental Controls
Implement a written
infection-control plan for
triage of patients with
suspected or confirmed
TB disease. Update
annually.
Settings in which patients
with suspected or confirmed
TB disease are rarely seen
and not treated do not need
an airborne infection
isolation (AII) room.
Promptly recognize and
transfer patients with
suspected or confirmed
TB disease to a facility
that treats persons with
TB disease.
Place any patient with
suspected or confirmed TB
disease in an AII room if
available or in a separate
room with the door closed,
away from others and not in
a waiting area.
Before transferring the
patient out of this setting,
hold the patient in an area
separate from health-care
workers (HCWs) and other
persons.
Air-cleaning technologies
(e.g., high efficiency
particulate air [HEPA]
filtration and ultraviolet
germicidal irradiation [UVGI]
can be used to increase the
number of equivalent air
changes per hour [ACH]).
Respiratory-protection
Controls
Settings in which patients
with suspected or
confirmed TB disease are
rarely seen and not
treated do not need a
respiratory-protection
program.
If the patient has signs or
symptoms of infectious TB
disease (positive acid-fast
bacilli [AFB] sputum
smear result), consider
having the patient wear a
surgical or procedure
mask (if possible) during
transport, in waiting
areas, or when others are
present.
45.
46. Managing TB Patients: Considerations
for Special Settings
Inpatient Settings in Which Patients with Suspected or Confirmed Infectious TB Disease are Expected to be Encountered
Setting
Administrative Controls
â˘
Perform an annual risk
assessment for the setting.
â˘
Implement a written
infection-control plan for the
setting and evaluate and
update annually.
â˘
Provide TB training,
education, and screening for
HCWs as part of the infectioncontrol plan.
â˘
Establish protocols for
problem evaluation.
â˘
When possible, postpone
nonurgent procedures that
might put HCWs at risk for
possible exposure to M.
tuberculosis until patients are
determined to not have TB
disease or are noninfectious.
â˘
Collaborate with state or local
health departments when
appropriate.
Environmental Controls
â˘
In settings with a high
volume of patients with
suspected or confirmed
TB disease, at least one
room should meet
requirements for an AII
room.
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to
increase the number of
equivalent ACH.
â˘
â˘
Respiratory-protection
Controls
For HCWs, visitors,Âś and
others entering the AII
room of a patient with
suspected or confirmed
infectious TB disease, at
least N95 disposable
respirators should be
worn.
If the patient has signs or
symptoms of infectious TB
disease consider having
the patient wear a surgical
or procedure mask, if
possible, (e.g., if patient is
not using a breathing
circuit) during transport,
in waiting areas, or when
others are present.
47. Managing TB Patients: Considerations
for Special Settings
Setting
Patient rooms
Administrative Controls
â˘
Place patients with
â˘
suspected or confirmed
TB disease in an AII room.
â˘
Persons infected with
human immunodeficiency
virus (HIV) or who have
other
immunocompromising
â˘
conditions should
especially avoid exposure
to persons with TB
disease.
Environmental Controls
At least one inpatient
â˘
room should meet
requirements for an AII
room to be used for
patients with suspected or
confirmed infectious TB
disease.
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to
increase the number of
equivalent ACH.
â˘
Respiratory-protection
Controls
For HCWs, visitors,Âś and
others entering the AII
room of a patient with
suspected or confirmed
infectious TB disease, at
least N95 disposable
respirators should be
worn.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the
patient wear a surgical or
procedure mask, if
possible, (e.g., if patient is
not using a breathing
circuit) during transport,
in waiting areas, or when
others are present.
48. Managing TB Patients: Considerations
for Special Settings
Setting
Emergency departments
Administrative Controls
Environmental Controls
â˘
Implement a written
infection-control plan for
triage of patients with
suspected or confirmed
TB disease. Update
annually.
â˘
Patients with signs or
symptoms of infectious TB
disease should be moved
to an AII room as soon as â˘
possible.
(EDs)
â˘
In settings classified as
â˘
medium risk or potential
ongoing transmission, at
least one room should
meet requirements for an
AII room to be used for
patients with suspected or
confirmed infectious TB
â˘
disease.
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to
increase the number of
equivalent ACH.
Respiratory-protection
Controls
For HCWs, visitors,Âś and
others entering the AII
room of a patient with
suspected or confirmed
TB disease, at least N95
disposable respirators
should be worn.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the
patient wear a surgical or
procedure mask, if
possible, (e.g., if patient is
not using a breathing
circuit) during transport,
in waiting areas, or when
others are present.
49. Managing TB Patients: Considerations
for Special Settings
Setting
Intensive care units (ICUs)
Administrative Controls
â˘
Environmental Controls
Place patients with
â˘
suspected or confirmed
infectious TB disease in an
AII room, separate from
HCWs and other patients,
if possible.
â˘
In settings with a high
volume of patients with
suspected or confirmed
TB disease, at least one
room should meet
requirements for an AII
room to be used for such
patients.
â˘
Bacterial filters should be â˘
used routinely in
breathing circuits of
patients with suspected or
confirmed TB disease and
should filter particles 0.3
Îźm in size in unloaded
and loaded situations with
a filter efficiency of âĽ95%.
Respiratory-protection
Controls
For HCWs, visitors,Âś and
others entering the AII
room of a patient with
suspected or confirmed
infectious TB disease, at
least N95 disposable
respirators should be
worn.
If the patient has signs or
symptoms of infectious TB
disease and is suspected
of being contagious
(positive AFB sputum
smear result), consider
having the patient wear a
surgical or procedure
mask, if possible (e.g., if
patient is not using a
breathing circuit) during
transport, in waiting
areas, or when others are
present.
50. Managing TB Patients: Considerations
for Special Settings
Setting
Surgical suites
Administrative Controls
â˘
Schedule a patient with
suspected or confirmed
TB disease for surgery
when a minimum number
of HCWs and other
patients are present, and
as the last surgical case of
the day to maximize the
time available for removal
of airborne
contamination. For
postoperative recovery,
place patients in a room
that meets requirements
for an AII room.
Environmental Controls
â˘
If a surgical suite has an operating
room (OR) with an anteroom, that
room should be used for TB cases.
â˘
If surgery is needed, use a room or
suite of rooms that meet
requirements for AII rooms.
â˘
If an AII or comparable room is not
available for surgery or
postoperative recovery, aircleaning technologies (e.g., HEPA
filtration and UVGI) can be used to
increase the number of equivalent
ACH.
â˘
If the health-care setting has an
anteroom, reversible flow rooms
(OR or isolation) are not
recommended by the American
Institute of Architects or American
Society of Heating, Refrigerating
and Air-conditioning Engineers,
Inc.
â˘
Bacterial filters should be used
routinely in breathing circuits of
patients with suspected or
confirmed TB disease and should
filter particles 0.3 Îźm in size in an
unloaded and loaded situation
with a filter efficiency of âĽ95%.
Respiratory-protection
Controls
â˘
For HCWs present during
surgery of a patient with
suspected or confirmed
infectious TB disease, at least
N95 disposable respirators,
unvalved, should be worn.
â˘
Standard surgical or
procedure masks for HCWs
might not have fitting or
filtering capacity for adequate
protection.
â˘
If the patient has signs or
symptoms of infectious TB
disease (positive AFB sputum
smear result), consider having
the patient wear a surgical or
procedure mask, if possible,
before and after the
procedure.
â˘
Valved or positive-pressure
respirators should not be used
because they do not protect
the sterile surgical field.
51. Managing TB Patients: Considerations
for Special Settings
Setting
Laboratories**
Administrative Controls
Environmental Controls
â˘
Conduct a laboratoryspecific risk assessment.
â˘
â˘
In general, biosafety level
(BSL)-2 practices,
procedures, containment
equipment, and facilities
are required for
nonaerosol-producing
manipulations of clinical
specimens. BSL-3
â˘
practices, procedures, and
containment equipment
might be necessary for
certain aerosol-generating
or aerosol-producing
manipulations.
Environmental controls
â˘
should meet
requirements for clinical
microbiology laboratories
in accordance with
guidelines by Biosafety in
Microbiological and
Biomedical Laboratories
(BMBL) and the AIA.
Perform all manipulation
of clinical specimens that
could result in
aerosolization in a
certified class I or II
biosafety cabinet (BSC).
Respiratory-protection
Controls
For laboratory workers
who manipulate clinical
specimens (from patients
with suspected or
confirmed infectious TB
disease) outside of a BSC,
at least N95 disposable
respirators should be
worn.
52. Managing TB Patients: Considerations
for Special Settings
Setting
Bronchoscopy suitesâ â
Administrative Controls
Environmental Controls
â˘
â˘
Use a dedicated room to
perform bronchoscopy
procedures.
â˘
If a patient with suspected
or confirmed infectious TB
â˘
disease must undergo
bronchoscopy, schedule
the procedure when a
minimum number of
HCWs and other patients
â˘
are present, and schedule
the patient at the end of
the day.
â˘
Do not allow another
procedure to be
performed in the
bronchoscopy suite until
sufficient time has
elapsed for adequate
removal of M.
tuberculosisâ
contaminated air.
â˘
Bronchoscopy suites should â˘
meet requirements for an AII
room to be used for patients
with suspected or confirmed
infectious TB disease.
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to
increase the number of
equivalent ACH.
Closing ventilatory circuitry
and minimizing opening of
such circuitry of intubated
and mechanically ventilated
patients might minimize
exposure.
Keep patients with
suspected or confirmed
infectious TB disease in the
bronchoscopy suite until
coughing subsides.
â˘
Respiratory-protection
Controls
For HCWs present during
bronchoscopic procedures
of a patient with suspected
or confirmed infectious TB
disease, at least N95
disposable respirators
should be worn. Protection
greater than an N95 (e.g., a
full-facepiece elastomeric
respirator or powered airpurifying respirator [PAPR])
should be considered.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the patient
wear a surgical or
procedure mask, if
possible, before and after
the procedure.
53. Managing TB Patients: Considerations
for Special Settings
Setting
Sputum induction and
Administrative Controls
â˘
Implement a written
infection-control plan in the
setting. Update annually.
â˘
Use a dedicated room to
perform sputum induction
and inhalation therapy.
â˘
Schedule sputum induction
and inhalation therapy when
a minimum number of HCWs
and other patients are
present, and schedule the
patient at the end of the day.
Environmental Controls
inhalation therapy rooms
â˘
â˘
Perform sputum induction
â˘
and inhalation therapy in
booths with special
ventilation, if possible. If
booths are not available,
sputum induction or
inhalation therapy rooms
should meet requirements for
an AII room to be used for
patients with suspected or
confirmed infectious TB
disease.
â˘
Do not perform another
procedure in a booth or room
where sputum induction or
inhalation therapy on a
patient with suspected or
â˘
confirmed infectious TB
disease was performed until
sufficient time has elapsed for
adequate removal of M.
tuberculosis-contaminated air.
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to increase
the number of equivalent
â˘
ACH.
Keep patients with suspected
or confirmed infectious TB
disease in the sputum
induction or inhalation
therapy room after sputum
collection or inhalation
therapy until coughing
subsides.
Respiratory-protection
Controls
For HCWs present during
sputum induction and
inhalation therapy of a
patient with suspected or
confirmed infectious TB
disease, a respirator with a
level of protection of at
least N95 disposable
respirators should be worn.
Respiratory protection
greater than an N95 (e.g., a
full-facepiece elastomeric
respirator or PAPR) should
be considered.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the patient
wear a surgical or
procedure mask, if
possible, before and after
the procedure.
54. Managing TB Patients: Considerations
for Special Settings
Setting
Autopsy suites
Administrative Controls
â˘
â˘
Environmental Controls
Ensure proper
â˘
coordination between
attending physician(s) and
pathologist(s) for proper
infection control and
specimen collection
â˘
during autopsies
performed on bodies with
suspected or confirmed
infectious TB disease.
Allow sufficient time to
elapse for adequate
removal of M.
tuberculosiscontaminated air before
performing another
procedure.
â˘
â˘
Autopsy suites should
meet ACH requirements
for an AII room to be used
for bodies with suspected
or confirmed TB disease .
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to
increase the number of
equivalent ACH.
Consider using local
exhaust ventilation to
reduce exposures to
infectious aerosols and
vapors from embalming
fluids.
â˘
Respiratory-protection
Controls
For those present during
autopsy on bodies with
suspected or confirmed
infectious TB disease, a
respirator with a level of
protection of at least an
N95 should be worn.
Protection greater than an
N95 (e.g., a full-facepiece
elastomeric respirator or
PAPR) should be
considered, especially if
aerosol generation is likely.
If another procedure
cannot be delayed until
sufficient time has elapsed
for adequate removal of M.
tuberculosis-contaminated
air, staff should continue
wearing respiratory
protection while in the
room.
55. Managing TB Patients: Considerations
for Special Settings
Outpatient Settings§§ in Which Patients with Suspected or Confirmed Infectious TB Disease are Expected to be Encountered
Setting
Administrative Controls
Environmental Controls
Respiratory-protection
Controls
â˘
For HCWs, visitors,Âś and others
â˘
Perform an annual risk
â˘
Environmental controls
entering an AII room of a patient
assessment for the
should be implemented
with suspected or confirmed
setting.
based on the types of
infectious TB disease, at least
activities that are
N95 disposable respirators
â˘
Develop and implement a
should be worn.
performed.
written infection-control
plan for the setting and
evaluate and update
annually.
â˘
Provide TB training,
education, and screening
for HCWs as part of the
infection-control plan.
â˘
Establish protocols for
problem evaluation.
â˘
Collaborate with state or
local health departments
when appropriate.
â˘
Patients with suspected or
confirmed infectious TB
disease requiring
transport should be
transported as discussed
below under Emergency
Medical Services (EMS).
â˘
If the patient has signs or
symptoms of infectious TB
disease (positive AFB sputum
smear result), consider having
the patient wear a surgical or
procedure mask, if possible (e.g.,
if patient is not using a breathing
circuit), during transport, in
waiting areas, or when others are
present.
â˘
If risk assessment indicates that
respiratory protection is needed,
drivers or HCWs who are
transporting patients with
suspected or confirmed
infectious TB disease in an
enclosed vehicle should wear at
least an N95 disposable
respirator. The risk assessment
should consider the potential for
shared air.
56. Managing TB Patients: Considerations
for Special Settings
Setting
TB treatment facilitiesœœ
Administrative Controls
â˘
â˘
Environmental Controls
â˘
Physically separate
immunosuppressed
patients from those with
suspected or confirmed
â˘
infectious TB.
Schedule appointments
to avoid exposing HIVinfected or other
severely
â˘
immunocompromised
persons to M.
tuberculosis.
If patients with TB disease are â˘
treated in the clinic, at least
one room should meet
requirements for an AII room.
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to increase
the number of equivalent
ACH.
Perform all cough-inducing or â˘
aerosol-generating
procedures by using
environmental controls (e.g.,
booth) or in an AII room.
â˘
Keep patients in the booth or
AII room until coughing
subsides.
â˘
Do not allow another patient
to enter the booth or AII room
until sufficient time has
elapsed for adequate removal
of M. tuberculosis
contaminated air.
Respiratory-protection
Controls
For HCWs, visitors,Âś and
others entering the AII
room of a patient with
suspected or confirmed
infectious TB disease, at
least N95 disposable
respirators should be
worn.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the
patient wear a surgical or
procedure mask, if
possible, during transport,
in waiting areas, or when
others are present.
57. Managing TB Patients: Considerations
for Special Settings
Setting
Medical offices and
ambulatory-care settings
Administrative Controls
â˘
Implement a written
infection-control plan in
the setting. Update
annually.
Environmental Controls
â˘
In medical offices or
â˘
ambulatory care settings
where patients with TB
disease are treated, at
least one room should
meet requirements for an
AII room to be used for
patients with suspected or
confirmed infectious TB
â˘
disease .
Respiratory-protection
Controls
For HCWs in medical
offices or ambulatory care
settings with patients with
suspected or confirmed
infectious TB disease, at
least N95 disposable
respirators should be
worn.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the
patient wear a surgical or
procedure mask, if
possible, during transport,
in waiting areas, or when
others are present.
58.
59. Managing TB Patients: Considerations
for Special Settings
Setting
Dialysis units
Administrative Controls
â˘
Schedule dialysis for
â˘
patients with TB disease
when a minimum number
of HCWs and other
patients are present and
at the end of the day to
maximize the time
â˘
available for removal of
airborne contamination.
Environmental Controls
Respiratory-protection
Controls
â˘
Perform dialysis for
patients with suspected or
confirmed infectious TB
disease in a room that
meets requirements for
an AII room.
â˘
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to
increase the number of
equivalent ACH.
â˘
For HCWs, visitors,Âś and others
entering the AII room of a
patient with suspected or
confirmed infectious TB
disease, at least N95 disposable
respirators should be worn.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB sputum
smear result), consider having
the patient wear a surgical or
procedure mask, if possible,
during transport, in waiting
areas, or when others are
present.
If risk assessment indicates the
need for respiratory protection,
drivers or HCWs who are
transporting patients with
suspected or confirmed
infectious TB disease in an
enclosed vehicle should wear at
least an N95 disposable
respirator. The risk assessment
should consider the potential
for shared air.
60. Managing TB Patients: Considerations
for Special Settings
Setting
Dental-care settings
Administrative Controls
â˘
If possible, postpone
â˘
dental procedures of
patients with suspected or
confirmed infectious TB
disease until the patient is
determined not to have
TB disease or to be
â˘
noninfectious.
Environmental Controls
Treat patients with
suspected or confirmed
infectious TB disease in a
room that meets
requirements for an AII
room.
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to
increase the number of
equivalent ACH.
Respiratory-protection
Controls
â˘
For dental staff
performing procedures on
a patient with suspected
or confirmed infectious TB
disease, at least N95
disposable respirators
should be worn.
61. Managing TB Patients: Considerations
for Special Settings
Nontraditional Facility-Based Settings
Setting
Administrative Controls
Environmental Controls
â˘
Perform an annual risk
assessment for the
setting.
â˘
Develop and implement a
written infection-control
plan for the setting and
â˘
evaluate and update
annually.
â˘
Provide TB training,
education, and screening
for HCWs as part of the
infection-control plan.
â˘
Establish protocols for
problem evaluation.
â˘
Collaborate with state or
local health departments
when appropriate.
â˘
Environmental controls
should be implemented
based on the types of
activities that are
performed.
â˘
Patients with suspected or
confirmed infectious TB
disease requiring
transport should be
â˘
transported as discussed
in the EMS section.
Respiratory-protection
Controls
For HCWs, visitors,Âś and
others entering the AII
room of a patient with
suspected or confirmed
infectious TB disease, at
least N95 disposable
respirators should be
worn.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the
patient wear a surgical or
procedure mask, if
possible (e.g., if patient is
not using a breathing
circuit), during transport,
in waiting areas, or when
others are present.
62. Managing TB Patients: Considerations
for Special Settings
Setting
EMS
Administrative Controls
â˘
Environmental Controls
â˘
Include exposed
emergency medical HCWs
in the contact
investigation of patients
with TB disease if
administrative,
environmental, and
respiratory-protection
controls for TB infection
control were not
followed.
â˘
Patients with suspected or
â˘
confirmed infectious TB disease
requiring transport should be
transported in an ambulance
whenever possible. The
ambulance ventilation system
should be operated in the nonrecirculating mode, and the
maximum amount of outdoor
air should be provided to
facilitate dilution. If the vehicle
has a rear exhaust fan, use this
fan during transport. Airflow
should be from the cab (front
of vehicle), over the patient,
and out the rear exhaust fan.
â˘
If an ambulance is not used, the
ventilation system for the
vehicle should bring in as much
outdoor air as possible, and the
system should be set to nonrecirculating. If possible,
physically isolate the cab from
the rest of the vehicle and have
the patient sit in the back.
Respiratory-protection
Controls
If risk assessment indicates
the need for respiratory
protection, drivers or HCWs
who are transporting
patients with suspected or
confirmed infectious TB
disease in an enclosed
vehicle should wear at
least an N95 disposable
respirator. The risk
assessment should
consider the potential for
shared air.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the patient
wear a surgical or
procedure mask, if
possible, during transport,
in waiting areas, or when
others are present.
63. Managing TB Patients: Considerations
for Special Settings
Setting
Medical settings in
Administrative Controls
â˘
correctional facilities
â˘
Follow recommendations
for inpatient and
outpatient settings as
appropriate. In waiting
rooms or areas, follow
recommendations for TB
treatment facilities.
Environmental Controls
â˘
At least one room should â˘
meet requirements for an
AII room.
â˘
Air-cleaning technologies
(e.g., HEPA filtration and
UVGI) can be used to
increase the number of
equivalent ACH.
If possible, postpone
transporting patients with â˘
suspected or confirmed
infectious TB disease until
they are determined not
to have TB disease or to
be noninfectious.
When transporting
patients with suspected or
confirmed infectious TB
disease in a vehicle
(ideally an ambulance), if
possible, physically isolate
the cab (the front seat)
from rest of the vehicle,
have the patient sit in the
back seat, and open the
windows.
â˘
Respiratory-protection
Controls
For HCWs or others
entering the AII room of a
patient with suspected or
confirmed infectious TB
disease, at least N95
disposable respirators
should be worn.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the
patient wear a surgical or
procedure mask, if
possible, during transport,
in waiting areas, or when
others are present.
64. Managing TB Patients: Considerations
for Special Settings
Setting
Home-based health-care
Administrative Controls
â˘
and outreach settings
â˘
â˘
Patients and household
â˘
members should be
educated regarding the
importance of taking
medications, respiratory
hygiene and cough
etiquette procedures, and
proper medical
evaluation.
If possible, postpone
transporting patients with
suspected or confirmed
infectious TB disease until
they are determined not
to have TB disease or to
be noninfectious.
Certain patients can be
instructed to remain at
home until they are
determined not to have
TB disease or to be
noninfectious.
Environmental Controls
â˘
Do not perform coughinducing or aerosolgenerating procedures
unless appropriate
environmental controls
are in place, or perform
those procedures outside, â˘
if possible.
â˘
Respiratory-protection
Controls
For HCWs entering the
homes of patients with
suspected or confirmed
infectious TB disease, at
least N95 disposable
respirators should be worn.
For HCWs transporting
patients with suspected or
confirmed infectious TB
disease in a vehicle,
consider at least an N95
disposable respirator.
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the patient
wear a surgical or
procedure mask, if
possible, during transport,
in waiting areas, or when
others are present.
65. Managing TB Patients: Considerations
for Special Settings
Setting
Long-termâcare settings
(e.g., hospices and skilled
nursing facilities)
Administrative Controls
â˘
Patients with suspected or â˘
confirmed infectious TB
disease should not be
treated in a longtermâ
care setting, unless proper
administrative and
environmental controls
and a respiratoryprotection program are in
place.
Environmental Controls
Do not perform coughinducing or aerosolgenerating procedures
unless appropriate
infection controls are in
place, or perform those
procedures outside, if
possible.
Respiratory-protection
Controls
â˘
If the patient has signs or
symptoms of infectious TB
disease (positive AFB
sputum smear result),
consider having the
patient wear a surgical or
procedure mask, if
possible, during transport,
in waiting areas, or when
others are present.
66.
67. TB Screening Procedures for Settings
(or HCWs) Classified as Low Risk
Symptom screen
TST or BAMT
Chest radiograph
Baseline
Upon hire
Upon hire
If baseline positive or
newly positive TST or
BAMT or documentation
of treatment for LTBI or
TB disease
Repeat
Not necessary
unless an
exposure occurs
Not necessary
unless an
exposure
occurs
Not needed unless
symptoms or signs of TB
disease develop or
unless recommended by
a clinician
68. TB Screening Procedures for Settings
(or HCWs) Classified as Medium Risk
Symptom screen
TST or BAMT
Chest radiograph
Baseline
Upon hire
Upon hire
If baseline positive or
newly positive TST or
BAMT or documentation
of treatment for LTBI or
TB disease
Repeat
Annually
Annually if
baseline
negative
Not needed unless
symptoms or signs of TB
disease develop or
unless recommended by
a clinician
69. TB Screening Procedures for Settings (or HCWs)
Classified as Potential Ongoing Transmission
Symptom screen
TST or BAMT
Chest radiograph
Baseline
Upon hire
Upon hire
If baseline positive or
newly positive TST or
BAMT or documentation
of treatment for LTBI or
TB disease
Repeat
Every 8â10 weeks until lapses in IC
have been corrected, and no
additional evidence of ongoing
transmission is apparent
Not needed unless
symptoms or signs of TB
disease develop or
unless recommended by
a clinician
73. TB-IC in the era of expanding HIV care
and treatment
ďŽ
Persons with undiagnosed, untreated and
potentially contagious TB are often seen
in HIV care settings
ďŽ
TB is the most common opportunistic
infection and a leading cause of death in
persons living with HIV/AIDS (PLWHA)
74. TB-IC in the era of expanding HIV care
and treatment
ďŽ
In high TB burden settings, up to 10% of persons with HIV
infection may have previously undiagnosed TB at the time of HIV
voluntary counseling and testing (VCT), persons without TB
disease at the time of HIV diagnosis may still develop TB in later
years, between 30% and 40% of PLWHA will develop TB in their
lifetime
ďŽ
PLWHA may become infected or re-infected with TB if they are
exposed to someone with infectious TB disease. They can
progress rapidly from TB infection to disease â over a period of
months rather than a period of years as is common for persons
with a normal immune system
ďŽ
They will then be at risk of spreading M. tuberculosis in the
community as well as to fellow patients, healthcare workers, and
staff at their HIV care clinics and in community programs
75. Administrative controls
ďŽ
Infection control plan
ďŽ
Administrative support for procedures in the
plan, including quality assurance
ďŽ
Training of staff
ďŽ
Education of patients and increasing community
awareness
ďŽ
Coordination and communication with the TB
program
76. IC plan
1.
Screening patients to identify persons with symptoms of
TB disease or who report being under investigation or
treatment for TB disease
2.
Providing face masks or tissues to persons with
symptoms of TB disease (âTB suspectsâ) or who report
being under investigation or treatment for TB disease
(âTB suspects or casesâ), and providing waste containers
for disposal of tissues and masks
3.
Placing TB suspects and cases in a separate waiting area
4.
Triaging TB suspects and cases to the front of the line to
expedite their receipt of services in the facility
77. IC plan
5.
Referring TB suspects to TB diagnostic services and
confirming that TB cases are adhering with treatment
6.
Using and maintaining environmental control measures
7.
Educating staff periodically on signs and symptoms of TB
disease, specific risks for TB for HIV-infected persons,
and need for diagnostic investigation for those with signs
or symptoms of TB
8.
Training and educating staff on TB, TB control, and the
TB-IC plan
9.
Monitoring the TB-IC planâs implementation