15. Follow these steps to create your custom dual-sided or 120â° cluster. Select the appropriate starter personal space: Select extension personal spaces to complete the basic shape of your configuration. Select Meet Me spaces: central, end, and touchdown surfaces. Select returns. Select terraces: low, box, and elevated. Select screens. Select storage. Select modesty panels. Select power and data components. Select accessories.
17. Go to Now. Dual-sided personal spaces are available in three widths and provide two, facing personal work spaces. 62â, 70â & 82â 120°personal spaces are available in two widths and provide three personal work spaces. 62â & 72â Worksurface heights can be adjusted anywhere between 24â and 30â. Initial height is set at 28 Ÿâ. Worksurface adjustments can be made with a 5mm Allen wrench.
18. Steps to create your custom cluster: Page 18 & 20. 1. Select the appropriate starter personal space. Page 40, 42, or 41. Select extension personal spaces to complete the basic shape of your configuration. Page 40,41 or 42.
21. Meet Me Spaces Meet Me spaces extend the functionality of personal spaces, providing impromptu meeting spaces and a place to park ideas. Central and End Meet Me spaces mount at 31 1/8â. Touchdown Meet Me spaces mount at the same height as personal spaces to provide a collaboration space at the end of a cluster. Adjustable to 24â to 30â
22. Steps to create your custom cluster: 3. Select Meet Me spaces: central, end, and touchdown surfaces. Page 44and 45. 4. Select returns. Page 46 & 47.
23. How to specify a return Return sizes do not have to match as shown. You may use a 67â on one side with an 82â on the other or a mini return. Bracket specification should be a edge and end at the end of a cluster. A mini-return ships with an edge bracket. A return must be used on both sides to cover the center support where electrical and data are located. Having a return, central or end meet me changes the width of the low or low box terrace.
24. How to specify a return Return sizes do not have to match as shown. You may use a 67â on one side with an 82â on the other or a mini return. Bracket specification should be a edge and end at the end of a cluster. A mini-return ships with an edge bracket. A return must be used on both sides to cover the center support where electrical and data are located. Having a return, central or end meet me changes the width of the low or low box terrace.
28. Planning Factors for Elevated Terraces 120° elevated terrace * It is not possible to use an elevated terrace on a single dual-sided personal workspace in the center of two 120° elevated terraces. 120° elevated terrace â starter dual sided terrace â 120° elevated terrace
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Single-sided has a left or right designation.
Single or dual-sided low terrace.Single-sided mini low terrace
Wool Felt coordinates are available on page 74, addition to 19 to the code.
Start here and go back and update the page number references for specking the 10 points.
Assembly instructions will be available in July. Symbols area available either online as a download or with the June set of CDâs. Your regional product specification team or myself will be happy to review a typical that is specified. You can request a recorded copy of this session if needed.