1. Alaa Eldin Ahmed Mohamed Anwar Ali Ghaly. Page 1 of 6
ALAA ELDIN AHMED MOHAMED ANWAR GHALY
Profession Mechanical Engineer (design and
supervision )
Date of Birth 1971
Nationality : Egyptian
Contacts :
Mobile /whatsApp : 00201090588103
Email : eng2010aladin@yahoo.com
KEY QUALIFICATIONS
Over 21 year’s professional experience in all mechanical engineering fields related to HVAC , Fire
fighting , Plumbing , sewage collection and treatment (studies , process and Hydraulic Calculations
conceptual and detailed design project planning, quotation preparation, tender evaluation design , design
review , construction/commissioning , operation and maintenance of sewage treatment plants and its
electromechanically
Sewer system Design including network planning , sewer model analysis using Bentley sewercad 8 ,
profile production , BOQ and specification
Water desalination RO system design including process flow diagram and mass balance, design of all
planet components from intake up to storage tanks
Transmission system design including route study and selection, steady state and unsteady state
calculations using Bentley Hammer V8i , pipes schedule selection , design of valve chambers , pumping
stations , water hammer protection system design , instrumentations and control
Water distribution system including network planning , water model analysis using Bentley watercad 8
, fire Hydrant , valve chambers , BOQ and specification
Design review and construction supervision for airports mechanical systems including HVAC ,
Fire Fighting , plumbing , Irrigation System ,BMS, Passenger Boarding Bridges Bags Handling System
Design review and construction supervision for high rise Buildings mechanical systems including HVAC
, Fire Fighting , plumbing
Familiar with codes , standard and reference Books like
AWWA ,Waste Water Engineering Treatment and Reuse (METCALF & EDDY) ,ASREA ,NFPA ,UPC
, IPC , SMACNA , BS , ASTM , ASME
EDUCATION AND PROFESSIONAL STATUS
Bachelor Degree in Mechanical Engineering, January, 1995 Benha University Egypt
EXPERIENCE RECORD
31/10/ 2006– Present Mohamed Turki Mott MacDonald (MTMM)
Head of Mechanical Department
Responsible for all mechanical works in company projects (design and
construction) including
Preparing projects cost estimation related to electromechanical works
Make Job descriptions and required qualifications for mechanical engineers
Interview the new candidate to support the design team and outside projects
2. Alaa Eldin Ahmed Mohamed Anwar Ali Ghaly. Page 2 of 6
Make the implementation plane and time schedule according to the priority of
submittals.
Distribute the work to the stuff.
Review and approve the mechanical design documents (calculations , Drawings ,BOQ
, specifications and material selections for construction projects)
Report to the top managers
Make the periodic evaluations for the stuff
Contact with clients and attend the meetings
Solving all technical issues related to mechanical works at office or site
Experience record and selected projects
2006
Design the mechanical non process works for Fiber Glass Factory at Jubiel including
HVAC , Fire Fighting , Plumbing , Cooling water network. Total project value 700
M.SAR
2007
Design review and construction supervision for NorthJeddahSTP(Airport 1) 250,000
m3/d.
Design, preparation of Tender documents and Evaluation of the Bidders for King
Abdullah Economic City MBR – STP (30,000 m³/d) (KAEC) project Based on EPC
and Based on BOO.
Design the mechanical works for Sultan Tower 2 basement , 1 G.F , 1 Mezzanine , 1
S. F. , 14 repeated floors
Design Review for North Dahran STP – (14,000,000 GPD) – (Owner– Saudi Aramco)
original design made by METCALF & EDDY USA
Sharing in Design , preparation of Tender documents and Evaluation of the Bidders
for King Abdullah Economic City RO – Desalination Plant (70,000 m³/d) (KAEC)
project Based on EPC
2008
Preparation of the master plan for Jizan region, including population analysis,
calculations, comparison of proposed solutions (Technical and Economical)
Design of mechanical works for GACA buildings HVAC , Fire Fighting , plumbing ,
BMS, and site networks including Irrigation System ,storm , potable and fire network,
STP and TSE network sewage and grey water networks chilled water network
Review for Taief STP (80,000 m³/d) diffused air
2009-2016
Masterplan ,Conceptual design , Detailed Design and tenderdocuments for16 Sewage
Treatment plants in Jizan Region KSA with capacities from 750 m³/d up to 44,000
3. Alaa Eldin Ahmed Mohamed Anwar Ali Ghaly. Page 3 of 6
m³/d with different technologies like extended aeration , SBR , and MBR, using
different types of machineries ,as follow:
Screens
Mechanical and manual Bar screen , Multirakes Screen ,Step Screen and Perforated
Drum
Grit Removal
Aerated Grit Removal and Vortex Grit Removal
Aeration system
Surface Aeration and Diffused Air
Settling Tank
Primary and secondary
Filtration
Multimedia , and disk filters
Disinfections
Chlorine and UV
Sharing in more than 130 Km2
Sewage network Design in Jizan Region including
pumping and lift stations with the force main with total lengths more than 1000 km
Sharing in more than 200 Km2
Sewage and water network Design in Mecca Al
Mokaramah Region including pumping and lift stations with the force main with
total lengths more than 1500 km
Sharing in Design , preparation of Tender documents and Evaluation of the Bidders
for King Abdullah Economic City RO – Desalination Plant (70,000 m³/d) (KAEC)
project Based on EPC
Sharing in Design and preparation of Tender documents for Taief – Al Baha Water
Transmission System with total length of 230 Km , flow 100,000 m3/d , Diameter
1000 mm ,and pressure about 60 bar at lift station
Sharing in Design and preparation of Tender documents for Ras Al Zour – Hafr Al
BatenWaterTransmission System with total length of 370 Km ,flow 150,000 m³/d,
Diameter 1200 mm ,and pressure about 60 bar at lift station
Full design of process and mechanical works for Jeddah main water lifting station
with capacity of 1,000,000 m³/d and peak 1,500,000 m³/d
Design Review and construction supervision for Arar Airport (under construction)
From 02/03/1998 to 30/10/2006 Air Craft Factory , Cairo , Egypt
Arab Organization for Industry.
Position: Project Specialist
Job profile
Responsible for design manufacture supervision, installation, commissioning, operation and maintenance
for sewage treatment plants in 15 governorates in Egypt (72 sewage treatment plant project) , 120 Nile
water Treatment Plants 15 Ground water Treatment plants ( Fe and Mn Removal) and 5 RO desalination
plants.
the work includes the following:
1. Calculation of the required demand and pollutant loads of the STP.
2. Sites investigation and selection of suitable location.
3. Preparation of conceptual design including the process and hydraulic calculations according to the
required effluent quality and the land topography.
4. Alaa Eldin Ahmed Mohamed Anwar Ali Ghaly. Page 4 of 6
4. design of the mechanical non process works (HVAC , firefighting , Plumbing , site networks
5. preparation of technical specifications
6. preparation of budgetary prices for the project
7. Preparing the time schedules for the project.
8. Construction supervision and factory test.
9. commissioning of the plant.
10. supervision of the operation and maintenance
11. Make the required calculations and tests for the process control for STP.
From 01/02/1996 to 1/3/1998
Position: Project engineering Elahram company for
engineering and trading -
Cairo , Egypt
Job description
Leading a group of electrical & mechanical technicians to do the electromechanical installation of
SHEBIEN ELKOOM sewage treatment plant
Job profile
1. Reading and understanding the design drawing and the attached item lists.
2. Check the civil works related to the electromechanically installations (dimensions, levels, and
quality.)
3. prepare and distribute the work sheets to each one of the installation team
4. Installing the electromechanically equipments.
5. testing and commissioning the plant
6. operate and maintain the plant
TRAININGS:
Project planning and management (Arab institute of technology).
Computer aided design (Arab institute of technology).
Quality control (Arab institute of technology).
Hydraulic system design and maintenance (Arab institute of technology).
Design and Commissioning of sewage treatment plants ( Kruger engineering Denmark)
COMPUTER SKILLS
Office (Excel – PowerPoint – Microsoft Word, Microsoft project).
AutoCAD
Biowin for STP simulation
Arts, and Bentley Hammer for design and analysis the hydraulics of pipe lines
SEWER Cad for design of sewer network
Water Cad for design of water network
HAP 4.9 for HVAC Load analysis
Duct sizer , Ductlator for duct design
LANGUAGES:
Speaking Reading writing
Arabic excellent excellent excellent
English very Good very Good Good