The document describes generating NC code for a milled component with a maximum dimension of 50 mm. A Solidworks part drawing and engineering standard drawing of the component must be developed. A link to the solution design is provided.
Milling Component Generate the NC code for a milled component. Using.pdf
1. Milling Component Generate the NC code for a milled component. Using Solidwork develop a
part drawing and an engineering standard drawing of the component. The design should entail
the following: - The part should have a maximum dimension 50 mm
Solution
https://drive.google.com/file/d/0B6zUq9r3gFOkdnVTY0cwU09qVm8/view?usp=sharing