tried looking at same problem different numbers and used the mat.pdf

•

0 gefällt mir•2 views

tried looking at same problem different numbers and used the math for mine and was wrong pls help Two of Metlock's products currently sell for $8 per unit, reflecting a 50% markup on their product cost. The overhead component of the product cost was believed to be $2 per unit for both products. After further analysis of the overhead costs, however, the following activity pools and cost driver quantities were determined. Calculate the total applied MOH for both products using the activity-based system described above.

Bildung

Weitere ähnliche Inhalte

Mehr von adonisjpr

Two categories of attackers include hacktivists and state actors. .pdf

adonisjpr

Twitter, el popular sitio de microblogs, se ha enfrentado a graves c.pdf

adonisjpr

Turner, Roth y Lowe son socios que comparten ingresos y prdidas en una proporcin de 2:3:5. Despus de largos desacuerdos entre los socios y varios perodos improductivos, los socios deciden liquidar la sociedad. Inmediatamente antes de la liquidacin, el balance de la sociedad muestra activos totales, $164,400; pasivo total, $110,000; Turner, Capital, $5,700; Roth, Capital, $15,600; y Lowe, Capital, $33,100. Los ingresos en efectivo de la venta de los activos fueron suficientes para pagar a los acreedores todo menos $44,000. Requerido: a. Calcule la prdida por la venta de los activos. b. Distribuya la prdida de la parte a a los socios. C. Determinar cunto, en su caso, cada socio debe contribuir a la sociedad para cubrir cualquier deficiencia de capital restante..

Turner, Roth y Lowe son socios que comparten ingresos y p�rdidas en .pdf

adonisjpr

Uber - Bir Startup'n Kkenleri ve lk Gnleri Dava: Mterileri eletirmek. Ksa deien iiler. Saldrgan dzenleyiciler. Aldatc yetkililer. "Her ne pahasna olursa olsun kazan" iyeri kltrnde kural ihlali ve acmaszln vurgulanmas. Sadece yedi ylda balangtan 70 milyar dolarlk bir iletmeye gemek iin gereken bu mu? Yoksa bu nitelendirmeler, kskan rakiplerin eletirileri yanl m? Uber ya da dnyann nde gelen ulam hizmetlerinden biri olan Uber Technologies Inc. olarak bilinen dk maliyetli ara arma hizmetinin heyecanl yolculuuna uzunca bir gz atalm. Balarken 2008 ylnda Paris'te bir konferansa katlan teknoloji giriimcileri Garrett Camp ve Travis Kalanick, karl bir gecede taksi bulmann zorluundan ikayet ediyorlard. Bu dei tokutan, bir dmeye dokunarak talep zerine bir araba aracak yeni teknoloji yaratma fikri geldi. The Upstarts'ta yazar Brad Stone, en azndan irketin resmi kken efsanesinin bu olduuna dikkat ekiyor. Aslnda bu fikri ortaya atan Camp, bir sredir arkada Kalanick ile akll telefon tabanl bir ehir arabas (lks araba veya siyah araba) paylam hizmeti kavramn tartyordu. Camp, yelerin favori web sitelerini dier insanlarla paylamalarna olanak tanyan keif ve neri arama motoru StumbleUpon'un kurucu ortayd. Kalanick ("cal-a-nick" olarak telaffuz edilir) ilk iini 18 yanda kurdu, bu bir SAT-hazrlk zel ders hizmetiydi. Bir dosya paylam ve hizmet ii olan Scour, onun ikinci i macerasyd, ancak Kalanick'in byk abasna ve srarna ramen baarsz oldu. Bir sonraki giriimi, bir video ak giriimi olan Red Swoosh'du. 2007'de 23 milyon dolara satld. Mart 2009'da Camp, Calgary'den eski yksek lisans rencileri Oscar Salazar ve Conrad Whelan ile birlikte Kalanick'in "mega danman" olarak grev yapt yeni ehir arabas fikrinin denenmesinde ba ekti. . Bunlardan biri, ilk olarak Haziran 2007'de Apple tarafndan piyasaya srlen ve yalnzca akll telefon endstrisinde devrim yaratmakla kalmayp ayn zamanda genellikle "paylam ekonomisi" olarak adlandrlan modern ibirliki ekonomiyi yaratmasyla tannan iPhone iin bir mobil uygulamann prototipiydi. Mart 2009'da UberCab olarak kurulan irket, mobil uygulama konseptini ilk olarak New York'ta test etti, ardndan 2011'de San Francisco'da kullanclarn siyah lks bir araba talep etmek iin iPhone'larnda bir dmeye basmalarna veya bir metin gndermelerine olanak tanyan bir hizmet olarak resmi olarak lanse edildi. (limuzin), geleneksel bir taksinin fiyatnn sadece 1,5 kat. Ancak o zamanki taksi irketlerinden farkl olarak, UberCab'in ayrt edici zellii, bir ulam a irketi olarak adlandrlmasyd; bu irkette yolcular, mobil uygulama veya web sitesi araclyla hizmet talep edebilir ve srcnn konumunu (GPS araclyla) takip edebilirdi. telefonlarnda) ve arabann tam olarak ne zaman geleceini biliyorlar. Birka arabas olmasna ve ok az kiinin bunu bilmesine ramen, giriim byk bir hit oldu. 2011 ylnda, ehir ve eyalet dzenleyicilerinin srar zerine, irket adn UberCab'den (nk bir ehir arabas veya taksi firmasnn ruhsat gerekliliklerini karlamad iin) "sper" anlamna gelen Uber'e (Almanca ber kelimesi.

Uber - Bir Startupn K�kenleri ve lk G�nleriDava M�terileri ele.pdf

adonisjpr

Trilogy Enterprises Inc. de Austin, Texas, es una empresa de software de rpido crecimiento y proporciona soluciones de software a empresas globales gigantes para mejorar las ventas y el rendimiento. Se enorgullece de su cultura nica y poco ortodoxa. Muchos de sus enfoques de la prctica comercial son inusuales, pero en el entorno altamente competitivo y cambiante de Trilogy, parecen funcionar. No existe un cdigo de vestimenta y los empleados establecen sus propios horarios, a menudo muy extensos. Tienden a socializar juntos (la edad promedio es de 26 aos), tanto en la cocina bien surtida de la oficina como en eventos patrocinados por la empresa y viajes a lugares como clubes de baile locales y retiros en Las Vegas y Hawi. Se ha desarrollado una jerga interna y la historia compartida de la firma ha adquirido el estatus de leyenda. La responsabilidad es pesada y llega temprano, con una actitud de "hazlo ahora" que prescinde de largos aprendizajes. Los nuevos reclutas reciben unas pocas semanas de capacitacin intensiva, conocida como "Universidad de Triloga" y los participantes la describen como "ms como un campo de entrenamiento que una escuela de negocios". La informacin se entrega como si fuera una manguera contra incendios y se espera que los nuevos empleados comprometan su experiencia y vitalidad en todo lo que hacen. Jeff Daniel, director de reclutamiento universitario, admite que la empresa intensa y poco convencional no es el empleador para todos. Pero definitivamente es un entorno donde las personas apasionadas por lo que hacen pueden prosperar. La empresa emplea a unas 700 personas tan apasionadas. Los gerentes de Trilogy saben que el rpido crecimiento que buscan depende de tener un personal de las mejores personas que puedan encontrar, capacitadas rpidamente y con amplia responsabilidad y libertad lo antes posible. El CEO Joe Liemandt dice: En una empresa de software, las personas lo son todo. No puedes construir la prxima gran empresa de software, que es lo que estamos tratando de hacer aqu, a menos que ests totalmente comprometido con eso. Por supuesto, los lderes de todas las empresas dicen: "La gente lo es todo". Pero no actan en consecuencia. Trilogy hace que encontrar a las personas adecuadas (las llama "grandes personas") sea una misin de toda la empresa. Los reclutadores buscan activamente a las personas ms frescas, si al menos con experiencia, en el mercado laboral, buscando ferias de carreras universitarias y departamentos de ciencias de la computacin para personas talentosas con ambicin e instinto empresarial. Los altos directivos llevan a cabo las primeras rondas de entrevistas y les informan a los prospectos que se vern presionados para lograr logros pero que sern bien recompensados. Los empleados llevan a los reclutas y a sus seres queridos a la ciudad cuando vuelan a Austin para la visita preliminar estndar de 3 das. Un da tpico puede comenzar con entrevistas agotadoras, pero terminar con ciclismo de montaa, patinaje sob.

Trilogy Enterprises Inc. de Austin, Texas, es una empresa de softwar.pdf

adonisjpr

Transforming Data - Creating a Data Set Creating a JOIN between two tables is one of several ways to consolidate data. Which of the following is NOT true about table JOINS in Tableau? Select one. JOINs effectively create one physical table of combined data. All JOIN types combine data in the same way. To JOIN two tables in Tableau, you must first double-click on the primary table, to reveal the physical layer. After performing a JOIN, we should hide one of the JOIN keys to ensure we do not have duplicate columns..

Transforming Data - Creating a Data Set Creating a JOIN between two .pdf

adonisjpr

Using the location quotients(LQ) for year 2020 for 10 provinces analyze what province has the most relational importance in the following sectors. (i)Agriculture (ii)Forestry, fishing, mining, quarrying, oil, and gas (iii)Manufacturing In this answer can you please mention the names of the provinces like Manitoba, Alberta and in the answer its mentions like province A and province B which don't indicate the province clearly instead please provide the names for them..

Using the location quotients(LQ) for year 2020 for 10 provinces anal.pdf

adonisjpr

Using the packet tracer simulator, create a network topology that includes at least one router, one switch, and several PCs. 4. Assign IP addresses and subnet masks to the devices in the network, making sure to use appropriate IP addressing scheme. 5. Connect the devices together using the appropriate cables or connections, including configuring VLANs on the switch. 6. Configure basic router and switch security features such as ACLs, port security, and VLAN access controls. 7. Save the network diagram as a reference for future use. 8. Describe the process of creating a network diagram that documents the necessary data, including IP addresses, subnet masks, and connections between devices, as well as the security configurations implemented. 9. Submit the network diagram along with a brief report that explains the purpose and role of each device in the network, as well as the security measures implemented and their justification 10. Analyse a sample medium complex network segment and identify common areas for improvement and potential risks. 3. Using the packet tracer simulator, create a network topology that includes at least one router, one switch, and several PCs. 4. Assign IP addresses and subnet masks to the devices in the network, making sure to use appropriate IP addressing scheme. 5. Connect the devices together using the appropriate cables or connections, including configuring VLANs on the switch. 6. Configure basic router and switch security features such as ACLs, port security, and VLAN access controls. 7. Save the network diagram as a reference for future use. 8. Describe the process of creating a network diagram that documents the necessary data, including IP addresses, subnet masks, and connections between devices, as well as the security configurations implemented. 9. Submit the network diagram along with a brief report that explains the purpose and role of each device in the network, as well as the security measures implemented and their justification 10. Analyse a sample medium complex network segment and identify common areas for improvement and potential risks..

Using the packet tracer simulator, create a network topology that in.pdf

adonisjpr

using silde 2 to answer silde 1 and 3 Step 17 of 40 - Create T Accou.pdf

adonisjpr

Using financial data and information from Yahoo Finance only, calcul.pdf

adonisjpr

using IRAC method Joseph was a team manager of an excursion in the Okavango Delta. Two of Joseph' s team were attacked by elephants and left, claiming that it has become too dangerous. With that Joseph promised the other colleague who remained, Karabo, that if she stayed and all of the excursion work was completed, Karabo would get monies of one of the colleagues who left without completing work. Karabo went on and agreed, but after the excursion was done, to Karabo's surprise Joseph refuses to pay the money to Karabo. in 250-350 words ,advice Karabo whether she is entitled to the extra payment.

using IRAC method Joseph was a team manager of an excursion in the O.pdf

adonisjpr

Using Java programming language solve the following: SLL CLASS: //************************** SLL.java ********************************* // a generic singly linked list class public class SLL { private class SLLNode { private T info; private SLLNode next; public SLLNode() { this(null,null); } public SLLNode(T el) { this(el,null); } public SLLNode(T el, SLLNode ptr) { info = el; next = ptr; } } protected SLLNode head, tail; public SLL() { head = tail = null; } public boolean isEmpty() { return head == null; } public void addToHead(T el) { head = new SLLNode(el,head); if (tail == null) tail = head; } public void addToTail(T el) { if (!isEmpty()) { tail.next = new SLLNode(el); tail = tail.next; } else head = tail = new SLLNode(el); } public T deleteFromHead() { // delete the head and return its info; if (isEmpty()) return null; T el = head.info; if (head == tail) // if only one node on the list; head = tail = null; else head = head.next; return el; } public T deleteFromTail() { // delete the tail and return its info; if (isEmpty()) return null; T el = tail.info; if (head == tail) // if only one node in the list; head = tail = null; else { // if more than one node in the list, SLLNode tmp; // find the predecessor of tail; for (tmp = head; tmp.next != tail; tmp = tmp.next); tail = tmp; // the predecessor of tail becomes tail; tail.next = null; } return el; } public void delete(T el) { // delete the node with an element el; if (!isEmpty()) if (head == tail && el.equals(head.info)) // if only one head = tail = null; // node on the list; else if (el.equals(head.info)) // if more than one node on the list; head = head.next; // and el is in the head node; else { // if more than one node in the list SLLNode pred, tmp;// and el is in a nonhead node; for (pred = head, tmp = head.next; tmp != null && !tmp.info.equals(el); pred = pred.next, tmp = tmp.next); if (tmp != null) { // if el was found; pred.next = tmp.next; if (tmp == tail) // if el is in the last node; tail = pred; } } } @Override public String toString() { if(head == null) return "[ ]"; String str = "[ "; SLLNode tmp = head; while(tmp != null){ str += tmp.info + " "; tmp = tmp.next; } return str+"]"; } public boolean contains(T el) { if(head == null) return false; SLLNode tmp = head; while(tmp != null){ if(tmp.info.equals(el)) return true; tmp = tmp.next; } return false; } public int size(){ if(head == null) return 0; int count = 0; SLLNode p = head; while(p != null) { count++; p = p.next; } return count; } } Part I: Programming Use the singly linked list class (Given below) to implement integers of unlimited size. Each node of the list should store one digit of the integer. You are required to implement the addition, subtraction and multiplication operations. In addition, provide a test class that will do the following: It will keep asking the user to enter two integers, choose one of the operations (addition, subtraction, multiplication) and then display the result. The program will stop upon e.

Using Java programming language solve the followingSLL CLASS.pdf

adonisjpr

using IRAC method Mary is an explorer and is about to set off on a ground-breaking expedition at the Debswana mines. Rose and John , who are Mary's friends are also professional explorers themselves, they then entered into a written agreement with each other that they will each help Mary from the start to the the end of her expedition. John breaks the agreement and does not help Mary to the end of her expedition, and instead returns home early. in 250-350 words advise Mary as to whether she can sue John for breach of contract.

using IRAC method Mary is an explorer and is about to set off on a.pdf

adonisjpr

*USING 'https://raw.githubusercontent.com/BeeDrHU/Introduction-to-Python-CSPC-323- /main/sales_forecast.csv' please fix the errors for the RNN using python so the code can run without errors, Thank you* ##Defining Function to Build Multivariate Data Structure def multivariate_data(dataset, target, start_index, end_index, history_size, target_size, step, single_step=False): data = [] labels = [] start_index = start_index + history_size if end_index is None: end_index = len(dataset) - target_size for i in range(start_index, end_index): indices = range(i-history_size, i, step) data.append(dataset[indices]) if single_step: labels.append(target[i+target_size]) else: labels.append(target[i:i+target_size]) return np.array(data), np.array(labels) ##Define the Multi-step Plotting Structure def multi_step_plot(history, true_future, prediction): plt.figure(figsize=(12, 6)) num_in = create_time_steps(len(history)) num_out = len(true_future) plt.plot(num_in, np.array(history[:, 1]), label='History') plt.plot(np.arange(num_out)/STEP, np.array(true_future), 'bo', label='True Future') if prediction.any(): plt.plot(np.arange(num_out)/STEP, np.array(prediction), 'ro', label='Predicted Future') plt.legend(loc='upper left') plt.show() ##Define Function to Plot training and Validation over Time def plot_train_history(history, title): loss = history.history['loss'] val_loss = history.history['val_loss'] epochs = range(len(loss)) plt.figure() plt.plot(epochs, loss, 'b', label='Training loss') plt.plot(epochs, val_loss, 'r', label='Validation loss') plt.title(title) plt.legend() plt.show() ##How far into the past do you want the model to see? past_history= ##How far into the future do you want the model to see? future_target= ## STEP= df_val = len(dataset) - past_history - future_target x_train_multi, y_train_multi = multivariate_data(dataset, dataset[:, 1], 0, df_train, past_history, future_target, STEP) x_val_multi, y_val_multi = multivariate_data(dataset, dataset[:, 1], df_train, df_val, past_history, future_target, STEP) ##Define Constants BATCH_SIZE = BUFFER_SIZE = EPOCHS = EVALUATION_INTERVAL = ##Adding Layers Due to Complexity train_data_multi = tf.data.Dataset.from_tensor_slices(()) train_data_multi = train_data_multi.cache().shuffle().batch().repeat() val_data_multi = tf.data.Dataset.from_tensor_slices(()) val_data_multi = val_data_multi.batch().repeat() multi_step_model = tf.keras.models.Sequential() multi_step_model.add(tf.keras.layers.LSTM()) multi_step_model.add(tf.keras.layers.LSTM()) multi_step_model.add(tf.keras.layers.Dense(72)) multi_step_model.compile(optimizer=tf.keras.optimizers.RMSprop(clipvalue=1.0), loss='mae') ##Train the Model multi_step_history = multi_step_model.fit(train_data_multi, epochs=, steps_per_epoch=, validation_data=, validation_steps=50) ##Predict Future Data for x, y in .take(3): multi_step_plot(x[0], y[0], .predict(x)[0]) #Evaluate the model on the test data test_data_multi = tf.data.Dataset.from_tensor_slices()) test_data_mu.

USING httpsraw.githubusercontent.comBeeDrHUIntroduction-to-Py.pdf

adonisjpr

Using facial recognition software in shelters for victims of domestic violence raises several ethical concerns that must be carefully considered before pursuing such a project. Firstly, using this technology in such a sensitive and vulnerable setting raises serious concerns about privacy, safety, and the potential abuse of power by staff. It is essential to obtain informed consent from guests and staff and ensure that their personal information is securely stored and not misused. Additionally, there is a risk that this technology could be used to track and monitor guests' movements, which could violate their rights and compromise their safety. Secondly, there is the issue of potential bias in the technology itself, as facial recognition software has been shown to be less accurate when identifying people of colour and women, which could result in false accusations and wrongful identification. To address these ethical concerns, engaging in a thorough ethical review process that involves input from diverse stakeholders, including legal experts, privacy advocates, and survivors of domestic violence is crucial. This process should prioritize transparency, accountability, and the protection of guests and staff's rights. Other ethical issues that designers and developers of such an application would need to address include the potential for hacking and data breaches, the impact on civil liberties and human rights, and the potential for unintended consequences and harm. Response to this article is required, please provide In-Text Citations and credible references with the response. Thanks!.

Using facial recognition software in shelters for victims of domesti.pdf

adonisjpr

Using a bash shell write a script using getops with options that display user information based on the users shell by searching an /etc/passwd-like file. The command will allow these options: -a Display users with all shells. Cannot be used with -s. -f FILE Search in FILE. FILE must be formatted like /etc/passwd. -h Display usage information. -s SHELL Display users with SHELL shell. SHELL must be in /etc/shells. Cannot be used with - a..

Using a bash shell write a script using getops with options that dis.pdf

adonisjpr

Use the modified abstract below to answer the following two questions: OBJECTIVES: The human immunodeficiency virus (HIV) and M. tuberculosis co-infection is a major global challenge. It is not properly clear why some HIV-positive people are co-infected with tuberculosis (TB) while others are not. This study answered this question. METHODS: This case-control study was conducted in Tehran, Iran, in June 2004, enrolling 2388 HIV- positive people. Cases were selected from those who were co-infected with TB and controls from those without TB. Multiple logistic regression analysis was performed to assess the association between M. tuberculosis/HIV co-infection and several predictors. RESULTS: In this study, 241 cases were compared with 2147 controls. Sex, age, marital status, educational level, imprisonment, smoking, narcotic addiction, route of HIV transmission, previous TB infection, isoniazid preventive therapy (IPT), antiretroviral therapy (ART), and CD4 count were independently associated with M. tuberculosis/HIV co-infection. However, after adjusting for all other variables in the model, only the association between M. tuberculosis/HIV co-infection and the following predictors were of importance: imprisoned (OR=3.82), previous TB infection (OR=5.54). CONCLUSIONS: Conclusions: Several predictors are associated with M. tuberculosis/HIV co-infection, but, there are only a few indicators that significantly affect the risk of M. tuberculosis/HIV co-infection. It is estimated that a number of predictors of M. tuberculosis/HIV co-infection still remain unknown and require further investigations. Original Abstract: Molaeipoor L et al. Predictors of Tuberculosis and Human Immunodeficiency Virus Co-infection: A Case-Control Study. Epidemiol Health. 2014 Oct 30 Flag question: Question 2 Question 2 Is there enough evidence to conclude if imprisonment or prior TB infection might have caused co-infection with tuberculosis and HIV? A.Yes B. No Question 3 What additional information would help you determine if the Odds Ratios were significantly different form the null hypothesis (OR = 1)? Select all that apply. Group of answer choices A. A 95% Confidence Interval B. The study hypothesis C. A full list of potentially confounding variables D. The Standard Error or Variance of the Odds Ratios Question 4 Which of the following measures of effect are statistically significant? Select all that apply. Group of answer choices A. Odds Ratio = 5.0, p-value = 0.04 B. Incidence Density Ratio = 2.0, 95% CI [0.9 - 3.1] C. Attributable Risk = 0.5, 95% CI [0.1 - 1.1] D. Population Attributable Risk = 0.1, 95% CI = [-0.1, 0.2] E. Cumulative Incidence Ratio = 0.5, 95% CI = [0.1 - 0.9] F. Odds Ratio = 20, p-value = 0.2.

Use the modified abstract below to answer the following two question.pdf

adonisjpr

Use the info that os provided. I just need basic sketch I H.I. H..1..pdf

adonisjpr

Tory and Cathy entered into a contract under which Cathy was supposed to provide the floral arrangements for Torys wedding on May 23. The day of the wedding arrives, but Cathy does not deliver the floral arrangements. Cory is devastated and feels that her wedding was ruined by the lack of floral arrangements. She sues Cathy successfully for breach of contract and then asks for punitive damages because her wedding was ruined. The evidence presented at court only shows that Cathy did not deliver the arrangements because she had accidentally written the wrong delivery date on her calendar. Answer following the IRAC method..

Tory and Cathy entered into a contract under which Cathy was suppose.pdf

adonisjpr

use Selenium to write a Java code that will Scrape data from a podcast site, such as episode titles, descriptions, and ratings. Java program should do the following: Open the website in a web browser using Selenium. Find and interact with various elements on the page (e.g., links, buttons, text boxes) using Selenium commands. Extract data from the page using Selenium commands, such as finding and storing text, images, or other content. Save the scraped data in a CSV file or other format of podcast site..

use Selenium to write a Java code that will Scrape data from a podca.pdf

adonisjpr

Mehr von adonisjpr (20)