It takes time to build a reputation. That's why Jay R. Smith Mfg. Co.® has devoted more than 85 years to engineering and manufacturing products to the high standards our customers have learned to expect. We work each day to find a way to make these products better. The Adjustable Linebacker® Fixture Support with Waste Fitting is an example of one for our many professional grade products. For more information, please visit www.jrsmith.com.

1. Sales Presentation Water Closet Supports

6. Typical Smith Fixture Support with Waste Fitting LINEBACKER ® Figure 0210RY Horizontal No-Hub Right Hand Single Fitting Water Closet Support Features Rear Support lug __ –M51 Anchor Foot (regularly furnished ) Face Plate Gasket Face Plate Bolts & Washers 4” Connection (NO-HUB) Waste Fitting with 2” NO-HUB Offset Vent Face Plate Nuts Fixture Studs Face Plate Base Supports Base Support Bolts and Washers ABS Nipple ABS Adjust-To-Wall Coupling with Knockout Test Cap Outlet Gasket Fixture Bearing Nuts & Washers Fixture Cap Nuts Fixture Washers-Fiber

9. Suffix –M12 Exposed Flush Valve Supply Support – The M12 support has been redesigned to provide greater strength and ease of installation. The stronger (3/16”) angle clip and more rigid stud make the M12 a great alternative to competitive products like the HoldRite Support. Optional Accessories Suffix –M13 Tiling Frame – The purpose of this frame is to provide a rim for a flat even surface for the tiler to work to when he is applying the finished wall tile. Available for siphon jet closets only. Suffix –M50 Elevated Support Base – For double (back-to-back) installations which require a single elevated water closet, the –M50 variation may be used with all regular Smith adjustable or compact supports. The –M50 is particularly adaptable to hospital or nursing home applications where a single water closet is installed on the stack at each floor. Not recommended for battery installations. Suffix –M40 Water Closet Support For Wide Pipe Chase - When the “C” dimension exceeds 7”, the –M40 Wide Pipe Chase Support should be used. This accessory provides a set of feet directly behind the wall for extra rigidity and an alignment yoke to ensure proper alignment of the nipple. The M-40 may be used with any vertical or horizontal fixture support in single or double (back-to-back) installations. Specify “C” dimensions when ordering C

10. Suffix –M54 Face Plate with side Mounted Base Support Assembly – Front View Top View A concealed flush valve will not clear the face plate when used with a blowout water closet support . Therefore 4 ½” to 6 ½” is required from back of wall to face plate to permit the installation of the concealed flush valve piping. Optional Accessories cont. Suffix –M17 Water Closet Setting Gauge – The Gauge has the same dimensions as the rear of the “Off The Floor” siphon jet bowl and is designed to eliminate costly trial and error test mounting and reduce the number of bowl “lifts” per day. Concealed Flush Valves – For most siphon jet water closets with concealed flush valves, the supply pipe enters the rear of the water closet above the top of the face plate without interference. Concealed flush valve piping in all cases does not interfere with the vent connection of the fitting. Siphon Jet Blowout 4 ½” – 6 ½”

13. Applications Water closet supports for various installations Horizontal Adjustable Carriers Double/Metal stud wall Single/Metal stud wall Double/Block wall Single/Block wall Vertical Adjustable Carriers Double/Metal stud wall Single/Metal stud wall Double/Block wall Single/Block wall Vertical Fixed Carriers Double/Metal stud wall Single/Metal stud wall Double/Block wall Single/Block wall

14. IAPMO Listed – File #1618 Conforms to ASME – A112.6.1M Certifications/Listings

16. Questions?

17. For more information on this or other products, or to contact your local Jay R. Smith Mfg. Co. representative, please visit our website at www.jrsmith.com Thank You!