We offer high precision rolls for Tube Mills. The rolls are made of EN-31 / High Carbon High Chrome ( D2, D3 ) and are hardened for longer life. We offer roll sets for manufacturing tubes/pipes OD range from 1/2" to 14".
2. Phone : 0091-11-28764059
SINGH ENGINEERING WORKS
Specialist In:
E.R.W. TUBE- MILL, RE-ROLLING MILLS & ALL KINDS
OF FORGED, FABRICATED & MACHINE PARTS
ABOUT US
Singh Engineering Works is one of the leading manufacturers & exporters of ERW Tube
Mills, HR/CR Slitting Lines and Quality Control & Testing Machines. These equipments are
manufactured under strict quality control and with timely delivery schedule. Apart from Tue Mill
Industry we also have expertise in Stainless Steel & M.S. Fabrication work for Pharmaceutical,
Chemical and Food Industries.
Singh Engineering Works was established in 1982 at New Delhi (India) to cater to the needs
of high precision ERW Tube Mills & ancillary machineries.
Having expertise and hands on experience of nearly thirty seven years in the industry we
have grown to have a considerable set up and in addition engaged various ancillary units working
for us according to the requirements. The company has not only tapped the domestic market but also
earned repute overseas.
We are proficient in handling turnkey projects and help our customers to start their production
line with ease.
We have been exporting our machineries directly and also through various exporters
regularly. We have to our credit nearly 400 installations in and outside India. This has been possible
owing to continuous efforts of our team of engineers and well experienced technicians. The
installations in the international market includes countries like Nepal, Bhutan, Bangladesh, Kenya,
Sudan.
3. RANGE OF PRODUCTS AVAILABLE
ERW Tube Mills
Tube Mill mainly consists of various units namely strip preparation, pipe forming, welding,
cooling, sizing straightening, pipe cut-off unit and pipe run out unit. The power transmission is done
by worm / bevel gear boxes which drives the whole machine.
We offer a range of ERW Tube Mills as mentioned below :
ERW Tube Mill Range
Tube OD Tube Thickness Line Speed
Min. (mm) Max. (mm) Min.(mm) Max.(mm) Max. (m/min.)
10.0 38.0 0.4 2.0 60 to 100
12.0 50.0 0.8 2.5 60 to 100
19.0 63.0 0.8 3.0 60 to 100
21.3 76.0 2.0 4.5 60
21.3 89.0 2.0 4.8 50 to 100
21.3 114.0 2.0 4.0 50 to 100
60.0 166.0 2.5 5.4 30 to 40
89.0 219.0 2.5 7.0 30 to 40
166.0 324.0 3.0 10.0 25
4. HR / CR Slitting Line
After centralizing the HR/CR coil with the uncoiler mandrel the coil is mounted on the uncoiler.
Then the mandrel is expanded and the snubber roll rotates the coil. Peeler breaks the straps and
brings the pre-end upto the Pinch roll. The Pinch roll drives the coil end upto the slitter and then its
drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop
table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.
Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in
synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired
constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed
on the exit coil car trolley through a pusher plate operated by hydraulic cylinder.
The range of slitting lines offered by us are as mentioned below :-
HR/CR Slitting Line Range :
Range of Capacity 5 Ton – 30 Ton
5. Max. Strip Width Upto 2000mm
Max. Strip Thickness Upto 10mm
Max. Speed Upto 60m/ min.
Raw Material Used HR/CR/SS/GP
Automation Option Manual /Semi-Automatic/Fully-Automatic
Rolls
We offer high precision rolls for Tube Mills. The rolls are made of EN-31 / High Carbon High
Chrome ( D2, D3 ) and are hardened for longer life.
We offer roll sets for manufacturing tubes/pipes OD range from ½” to 14”.
6. Tube Bend Testing Machine
The Tube Bend Testing Machine is fitted with 6 sets of 8D rolls driven by a reduction gear box and
fitted on a steel fabricated structure. The gear box is driven by a motor with a dual starter.
We offer these machines of size range from ½” to 2” (Tube OD)
Single Pipe Testing Hydraulic Press ( Hydro Tester )
Hydro Testers ( Single Pipe Testing Hydraulic Press) offered by us comes in the size
7. range from ½” to 12”.
Tube Straightening Machine
We offer Tube Straightening Machines in the size range from ½” to 6”
8. Cut to Length Lines
We offer Cut to Length machines in the following size range :
Max. Sheet Width : Upto 2000mm
Max. Sheet Thickness : Upto 12mm
Max. Coil Weight : Upto 30 Tons
Hydraulic Scrap Bailing Press
We offer Hydraulic Bailing Press as per the required scrap bail size.
9. Stainless Steel & M.S. Fabrication Work for Pharmaceutical, Chemical & Food
Industry
We undertake Stainless Steel as well as M.S. Fabrication work for Pharmaceutical, Chemical & Food
Industry.
10. Contact Us
Singh Engineering Works
A-13/1,Gali No.12
Anand Parbat Industrial Area
New Delhi (INDIA)
PIN- 110005
Phone: 0091-11-28764059
Mob: 09818302543
Mob: 09971667178
Email: singh_engineering@yahoo.co.in