Vijay Mahadeo Pawar is an electrical engineer with over 11 years of experience in electrical design. He has a B.E. in Electrical Engineering and is proficient in AutoCAD, ETAP and Microsoft Office applications. His experience includes conceptual design, specifications development, vendor evaluation, and project management for oil, gas and industrial facilities. Currently he works as a Senior Electrical Engineer at Mott MacDonald Pvt. Ltd. coordinating electrical design and construction activities.

1. VIJAY MAHADEO PAWAR
404, Bramhraj Plaza
Plot no. 73 Sector 8A
Airoli Navi Mumbai
Maharashtra - India
Cell No.: 9769192138
9821068973
Email: vijaypawar1983@gmail.com
-----------------------------------------------------------------------------------------------------------------------------------------------------------
EDUCATION QUALIFICATION
• B.E in Electrical from Smt Indira Gandhi College Of Engineering Mumbai in 2006-Percentage-63.47%
• H.S.C from Maharashtra Board in 2001- Percentage 73.50%
• S.S.C from Maharashtra Board in 1999 –Percentage 72.27%
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Total Experience : 11 Years
Details (From Present) As Below:
KEY QUALIFICATIONS
A graduate electrical engineer with 9 years of continuous experience in electrical engineering design: Four years as Sr. Electrical
Engineer and Five years as Electrical design engineer.
Experience in conceptual to detail engineering design of HT and LT distribution systems and all associated electrical installations in
large and medium size refinery, Petrochemical, Chemical, Metallurgical & Cement Industries projects.
Working in different aspects of electrical design like basic calculations, preparation of SLDs, developing specifications for electrical
equipment and systems, vendor drawing review, development of layout drawings through various stages of design up to construction.
Extensive co-ordination with piping & civil department for electrical layouts, process and rotating and package groups for electrical
load data update, detailed engineering, vendor interfacing.
Conversant with specifying and selection of electrical equipment and installations used in hazardous environments.
Conversant with relevant International and European Standards such as IEC, BS, NEC, IEEE, IS, OISD etc. and design practices in
oil industry.
WORK EXPERIENCE
• Currently working with M/s Mott MacDonald Pvt. Ltd. company with ISO 9001, ISO 14001, OHSAS 18001 and
ISO/ TS 29001 certification, as Sr. Electrical Engineer in Engineering Department since July 2011 to Till Date.
Company has specialise in Conceptual Studies, Front-End, Basic Engineering, Detailed Design of Upstream and
Downstream Process, Facilities and Pipelines and Construction Supervision Services
• M/s Furnace Fabrica (India) Limited, Navi Mumbai an EPC company with ISO 14001:2004 certification, as Sr.
Electrical Design Engineer in Engineering Department since 2007 to 2011.

2. The company undertakes projects in Oil & Gas, Fertilizers, Petrochemical, Chemical, Metallurgical & Cement
Industries on LSTK basis.
Company has joint venture with M/s Al Zahem as Al-Zahem & Furnace Fabrica General Trading & Contracting Co.
W.L.L at Kuwait & also has technical collabration with M/s Outokumpu GmbH earlier known as Lurgi
Metallurgie,GmbH, at Germany for Sulphuric Acid Plant. It has own workshop with “U Stamp’ & IBR approval &
almost all third party approvals.
Company has its branch offices at Delhi & Kochin in India & in Middle East at Kuwait, Qatar & Abu Dhabi.
• Worked as Graduate Trainee Engineer with M/s Mukand Engineers Limited. Thane-Belapur Road, an EPC
company with ISO 9000:2001 certification, Thane From 2006 to 2007
The company undertakes Project in Oil & Gas, Hydro Plant on LSTK basis. Major jobs are executed for BHEL, IOCL, &
NTPC.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
COMPUTER PROFICIENCY
• Knowledge of ETAP 7.0, 7.5 (Beginner) , AutoCAD (2004/2006/2007/2008) and other software such as Word, Power
Point, MS Access and Excel., Dilux Lighting Software
------------------------------------------------------------------------------------------------------------------------------------------------------------
JOB PROFILE
Responsibilities
• Involvement in preparation of Electrical Document control register of project, detail review of FEED document and
technical query discussion with client from Tender document.
• Attending the Kick Of Meeting, Discussion with End Client for finalization of scope of work, deliverable schedule, detail
technical discussion on electrical scope. Having experience to work with Client office on KEIL and KOC project
• Site visit for obtaining the existing details.
• Preparation of Electrical Load list and finalized the load distribution in the MV & LV Panels,
• Development of Single Line Diagrams for MV and LV Switchgear like PCC, MCC, MLDB, SLDB, ESLD, APFC Panel,
AC & DC UPS & Other Misc. DB for Industrial Plant Systems.
• Selection of MV and LV Circuit Breakers ,Protection Relays, Power Transformer, Cables, Battery, UPS, DC Battery &
Battery Charger, DG Set Etc.
• Sizing calculation of electrical Equipment like MV & LV cable, DG & GG Set, Distribution & Lighting Transformer,
AC UPS, DC Battery & Battery Charger, Capacitor, Earthing & Bonding of equipment, Indoor and Outdoor Area
Lighting.
• Prepare Load flow Study analysis & Motor Starting study on ETAP from Electrical load list.
• Preparation of technical specifications, data sheets of electrical equipment like MV & LV Switchgear, MV & LV Cable,
Transformer, VFD & Soft Starter Panel, MV & LV Motor, AC & DC UPS, Solar System, Flame proof & Non-Flame
proof material.
• Preparation of Cable and drum Schedules, E-SCADA/PLC Signal list, material take off of bulk material, Interconnection
schedule.
• Vendor offer evaluation & preparation of TBE of various electrical Equipment like High Mast, Electrical Panel (MV &
LV Switchboard), AC UPS, DC Battery & Battery Charger, DG Set, Distribution & Lighting Transformer, VFD & Soft
Starter Panel, Bus Duct, Solar System, flame proof & non flame proof material etc.
• Floating enquires for electrical panels and equipments with detailed technical specifications to Panel Suppliers/Venders
on behalf of end customer.
• Coordination with Purchase and Procurement Department for placing the orders to successful vendor.
• Detailed Technical discussion with vendor regarding the control schemes, Panel & Bus Duct General Arrangement
layout as per floor cutout and equipment location.
• Involvement in finalization of Power Distribution scheme flow line diagram, MV & LV Switchgear Protection SLD,
Lighting and small Power DB SLD, Standard Installation Power/Earting /Lighting drawing, Overall and area Power ,
Earthing and Lighting Layout, electrical equipment layout, Bus duct routing layout as per panel & Transformer location,
cable Tray/ trench routing & support inside cable cellar/in outdoor area etc.
• Indoor & outdoor Lighting calculations by special software such as Crompton, Bajaj Photolux Software.

3. • Checking the Vendor GA & Control wiring of 33kV GIS Switchboard, Power & Distribution Transformer, Lighting
Transformer, High Mast, DG & GG Set, AC UPS, DC Battery & Battery Charger, Soft Starter, VFD Panel, MV/LV
Motors drawings etc.
• Construction activity such as erection of MV & LV Panels, Transformer, Bus Duct, VFD/Soft Starter Panel, laying of
cable tray, MV/LV cables, Installation of lighting fitting, pole, earthing of equipment as per Standard Installation
Power/Earthing & Lighting drawing.
• Checking & coordination with the System and other services including cable trays, conduits etc.
• Co-ordination with other discipline for better detail design.
• Submission of Various project Reports, As Built Drawings etc to Client.
• Assign work and coordinate to Draughtsman & Engineer.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
PROJECTS HANDLED AT MOTT MAC DONALD
Work as a Lead Electrical Engineer on following projects;
• Construction of Remote Header Manifold & Associate work in South & east Kuwait Area
Client : Kuwait Oil Company
Contractor : Alghanim International General Trading Contracting Co. W.L.L.
• Pasir Gudang LPG Plant Expansion Project
Client : M/s NGC Energy
• FEED For Strategic Petroleum Products Storage Facilities Phase-1 (MESAIEED)
Client : M/s Qatar Petroleum
: Shell DEP Standards
• Upgradiation of Konaban GGS & Pipeline Grid Project-Tripura Asset
Client : Oil & natural Gas Corporation Limited, India
: ONGC Standards
• Sonamura GGS & Pipeline Grid Project-Tripura Asset
Client : Oil & natural Gas Corporation Limited, India
: ONGC Standards
• Bharat Oman Refinery Expansion Project
Client : Bharat Oman Refinery Limited, Bina, India
Work as a team member in following Projects;
• Siba Filed Development Project
Client : Kuwait Energy Iraq Limited
Contractor : Petrojet
• Assam Renewal Project Group A
Client : M/s Oil & Natural Gas Corporation
• EPMC Service For Uran-Chakan-Shikrapur-LPG Pipeline Project
Client : M/s Hindustan Petroleum Corporation Limited
• EPMC services for Mangalore-Hassan-Bangalore-Mysore LPG Pipeline Project
Client : M/s Hindustan Petroleum Corporation Limited
• Project Management Consultancy (EPCM) Services for Kota – Jobner (Jaipur) Pipeline Project
Client : Bharat Petroleum Corporation Ltd

4. PROJECTS HANDLED AT FURNACE FABRICA (I) LIMITED
• U263 12000 TPD Sulphur Melting & Filteration Plant OCP, JORF LASFER, MOROCCO from March 2011
onward (Details Engineering)
Contractual Completion Period : 7 Months
Client : M/s OCP Morocco
Consultant : M/s Jacobs Engineering
• Debari Zinc Smelter-Mercury Removal System from Nov. 2010 to December 2010
Contractual Completion Period : 2 Months
Client : Hindustan Zinc Limited
• Chanderiya Zinc Smelter- Mercury Removal System from Nov. 2010 to December 2010
Contractual Completion Period : 2 Months
Client : Hindustan Zinc Limited
• 4 L TPA Copper Smelter Expansion (SAP Plant, Tuticorin) from May 2010 onward
Contractual Completion Period : 6 Months
Client : Sterlite Industries (INDIA) Limited
Consultant : M/s Aker Solution Pvt. Limited, Kanjur Marg, Mumbai-400 042
• 300 TPD Sulphuric Saudi Arabia from December 2009 onwards
Contractual Completion Period : 8 Months
Client : M/s RAEZ SULPHATE FACTORY, JUBAIL, SAUDI ARABIA
• 3 x 3300 TPD Calciner & Hydrate Filteration Plant Vedanta, Lanjigarh Orissa from October’2008 to December
2009.
Contractual Completion Period : 14 Months
Client : M/s Vedanta Aliumina Limited Limited, Lanjigarh, Orissa.
PMC : M/s OUTOTECH
• U263 12000 TPD Sulphur Melting & Filteration Plant OCP, JORF LASFER, MOROCCO from March 2009 to
May 2009 (Basic Engineering)
Contractual Completion Period : 3 Months
Client : M/s OCP Morocco
• 210000 TPA Dariba Zinc Smelter from August 2008 to January 2009
Contractual Completion Period : 6 Months
Client : M/s Hindusta Zinc Limited, Dariba, Rajasthan
PMC : M/s Aker Solution Pvt. Limited, Kalina, Mumbai-400098
• Uttarakhand Zinc INGOT Project from November 2007 to July 2008
Contractual Completion Period : 8 Months
Client : M/s Hindustan Zinc Limited, Haridwar, Uttarakhand
PMC : M/s Mecon Limited.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
AREA OF INTEREST
• Detail Engineering Department
PASSPORT DETAIL
• Passport No : G2422949
• Date of Issue : 14/03/2007

5. • Date of Expiry : 13/03/2017
• Place of Issue : Mumbai
PERSONAL DETAILS
• Date of Birth : 8th
March, 1984
• Sex : Male
• Nationality : Indian
• Marital Status : Married
• Languages Known : English, Hindi & Marathi
• Notice Period Required : 1 Months from Date of Offer Letter
DECLARATION:
I hereby declare that the above mentioned information is true to my knowledge & I bear the responsibility for the correctness of
the above mentioned particulars.
Place :
Date :
(Vijay M Pawar)

6. • Date of Expiry : 13/03/2017
• Place of Issue : Mumbai
PERSONAL DETAILS
• Date of Birth : 8th
March, 1984
• Sex : Male
• Nationality : Indian
• Marital Status : Married
• Languages Known : English, Hindi & Marathi
• Notice Period Required : 1 Months from Date of Offer Letter
DECLARATION:
I hereby declare that the above mentioned information is true to my knowledge & I bear the responsibility for the correctness of
the above mentioned particulars.
Place :
Date :
(Vijay M Pawar)