This document provides information on load cells and related products from V-TEC. It includes specifications for dynamometers, tensiometers, overload switches, and displays that can be used for load indication and load limitation for cranes, hoists, and other lifting equipment. The dynamometers and tensiometers provide accurate load measurement and the overload switches and displays can be used to monitor and limit loads. An offshore dynamometer is highlighted that is suitable for use on offshore cranes with a compact, robust design and wireless transmission up to 200 meters.
2. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Content:
Load Cells Page Option Option
Dynamometer 1
Wireless Remote Display for Dynamometer 2
Mechanical Overload Switch 3
Static Line Tensiometer 4
Heavy Duty Tensiometer 5 ATEX
Running Line Tensiometer 6
Offshore Dynamometer 7
Shackle Pin 8 ATEX
Load Pin 9 ATEX
Junction Box 10
S Cell 11 ATEX OIML
Compression Cell 12
Pressure Transducer 13 ATEX
Bellows Bending Beam 14 ATEX
ET Stainless Series 15 ATEX
Bolt-on 16 ATEX OIML
Bin Lift 17 ATEX OIML
Silo Mount 18
Shear Beam 19 ATEX OIML
Button Cell 20
Annular Load Cell 21
Display and Amplifier Options Page
Amplifier 22
Panel Meter Display 23
Large Display 24
Remote Control 25
3. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
V-LINK Dynamometer
670601, 671201, 672501, 675501
• Highly accurate and reliable, ±0,2% FS accuracy.
• Very clear red digit LED display. Visible at long distances / in bright daylight.
• IP Class 67. Ideal for wet/humid environments.
• Robust high strength steel construction for use in hostile environments.
• Supplied with full certificate of calibration.
• Delivered in smart carry case from hard ABS plastic.
• Designed and manufactured in DK for high quality assurance.
Specifications:
Application: Crane and hoist calibration and proof load testing
Capacity: 6.5T, 12T, 25T, 55T
Accuracy: ±0,2% FS
Safe overload: 110%
Materials: High strenght steel housing. Fe/Zn12/A surface treatment according to ISO 2081
IP class: IP 67
Display: Bright LED
Digit height: 14 mm
Digit color: Red
Operating time: 16-20 hours (Operating at low temperatures will decrease the operating time)
Operation temp.: -20°C - +50°C
Batteries: Build-in Li-onBatteries: Build-in Li-on
Charger: High quality USB charger
Item No: Capacity (T) A (mm) B (mm) C (mm) D (mm) E (mm) Ø (mm) Weight (kg.) Increment (kg.)
670601 6.5 200.00 115.00 117.00 260.00 41.50 31.00 4.47 5
671201 12 200.00 115.00 117.00 281.00 41.50 37.30 5.65 10
672501 25 230.00 115.00 117.00 338.00 41.50 54.00 7.56 10
675501 55 282.00 115.00 155.00 440.00 46.00 73.00 16.93 20
Accessory options:
WRDTX01 Wirless remote display
1
4. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Remote Display, Wireless
WRDTX01
• Handheld display for V-LINK Dynamometer.
• Enables measurements to be read from long distances and moving objects.
• Up to 99 Dynamometers with remote display can be used in the same area.
• Very easy to use. Highly reliable and comfortable.
Specifications:
Application areas: For use with V-LINK Dynamometer only
Range: 150 meters in free range
Number of channels: 99
Standard frequency: 869.750 Mhz
Communication form: Duplex
RF output power: 10 mW
IP class: IP65
Operating time: 16-20 hours
Operating temp.: From -20°C - +50°C
Batteries: Build-in LI-ON
Charger: Standard USB charger, (used for V-LINK)
Item No: Dimensions Weight (kg.)
WRDTX01 H145 x L88 x W23 mm 0.15
2
5. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Mechanical Overload Switch
SM4067, SM4068
• Designed for load limitation of hoisting devices and cranes.
• The compact size provides a minimal lifting height reduction. L150 mm.
• Quick and precise installation with simple tools.
• Can easily be adjusted to fit different wire types and capacities.
• Linear force development gives a user-friendly reaction pattern.
• Available with 1 or 2 cut off points.
• Designed and manufactured in DK for high quality assurance.
Specifications:
Application areas: • Load limitation of hoisting devices, cranes and overhead cranes. Suitable for a variety
of industrial environments, including high-temperature and dusty environments.
• Can be used for low and high weights limits.
Materials: Housing: Nickel plated steel.
Springs: Heat treated spring steel, according to GB/T 13304.
Axles: CK45.
Hysteresis: Max 4% FS
Operating temp.: 0 to 80°C. Below 0°C a heating device is recommended.
Switch: UI: 500V UL Listed.
Utilisator: AC-15:230V/4A IEC 60947-5-1
DC-13: 24V / 1ADC-13: 24V / 1A
Item No: Wire Capacity Weight Dimensions
SM4067-2 6-13 mm 500-1500 kg. per reeving 2,45 kg. W70 x H145 x L150
SM4067-4 6-13 mm 1500-3000 kg. per reeving 2,80 kg. W70 x H145 x L150
SM4067-6 6-13 mm 3000-5000 kg. per reeving 3,15 kg. W70 x H145 x L150
SM4068-2 13-20 mm 500-1500 kg. per reeving 2,45 kg. W70 x H145 x L150
SM4068-4 13-20 mm 1500-3000 kg. per reeving 2,80 kg. W70 x H145 x L150
SM4068-6 13-20 mm 3000-5000 kg. per reeving 3,15 kg. W70 x H145 x L150
3
6. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Static Line Tensiometer
WT1-N, WT2-N
• Combined load indication and load limitation system for hoisting devices,
cranes and overhead cranes.
• Electronic clamp-on tensiometer, universal fit.
• Highly accurate and reliable, ±1% FS accuracy.
• Minimal lifting height reduction. Down to L100 mm.
• Quick and easy to install on the dead end of the wire rope.
• Designed and manufactured in DK for high quality assurance.
Specifications:
Accuracy: ± 1% FS
On unit: 0.1% FS
Mounted: 0.1% x wire diameter x2.
Output: 2.0 Nom MV/V balanced signal.
Material: Alu 7075
Temperature: 0,0011 MV/C
Input: EXC. 5-10 VDC
Cable: 3 mtrs. (Up to 15 mtrs. as option)
Item No: Wire (mm) Capacity (T) Dimensions (mm) Weight (kg.)
WT1-N 6-15 mm 5T per reeving L100 x W62 x H65 0.8 kg.
WT2-N 14-28 mm 10T per reeving L138x W80 x H85 1.5 kg.WT2-N 14-28 mm 10T per reeving L138x W80 x H85 1.5 kg.
Complete systems:
WT1-N + OL3000A Tensiometer + Amplifer (load limitation only)
WT1-N + P1001, D1002, D1004 Tensiometer + Display w. Amplifer (load indication and limitation)
WT1-N WT2-N
4
7. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Heavy Duty Tensiometer
WT3
• Combined load indication and load limitation system for hoisting devices
and cranes with large wires.
• Electronic clamp-on tensiometer, universal fit.
• Highly accurate and reliable, ±1% FS accuracy.
• Fully welded stainless steel construction.
• Quick and easy to install on the dead end of the wire rope.
• Supplied with 10 mtrs. cable.
Specifications:
Full Load Output: 1.0 nom mV/V
Zero Load Output: <±5.0%
Excitation (Max): 10 (15) V
Accuracy: ±1% FS
Repeatability: <0.25%
Input Resistance: 375 (±20) Ω
Output Resistance: 350 (±2) Ω
Compensated Temp. Range: -10° to 40°C
Operating Temp. Range: -20° to 60°C
Temp. Coefficient on Zero: <0.0010%Capacity/°C
Temp. Coefficient on Span: <0.0010%Capacity/°C
Safe Overload: 150%Safe Overload: 150%
Insulation: >500 @ 100Vdc MΩ
IP Class: IP68
Item No: Wire (mm) Capacity (kg.) Dimensions (mm)
WT3-27-28 27-28 9700 L230 x H116
WT3-29-32 29-32 12600 L230 x H116
WT3-33-35 33-35 15100 L230 x H116
WT3-36-38 36-38 17900 L230 x H116
Complete systems:
WT3 + OL3000A Tensiometer + Amplifer (load limitation only)
WT3 + P1001, D1002, D1004 Tensiometer + Display w. Amplifer (load indication and limitation)
5
8. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Running Line Tensiometer
RLT
• Combined load indication and load limitation system for moving wires.
• Accuracy down to 1%.
• Heavy duty ball bearing construction.
• Hardened stainless load pin.
• 3 standard housing models.
• Wide assortment of mounting accessories.
• Available in galvanised steel for corrosive environments.
Specifications:
Capacity: 1-1000T
Wire size: 13-38 mm
Output signal: 1mv/v at full load
IP Class: IP67
Relative humidity: >98%
Operating Temp.: -20°C to +60°C. Under 0°C a heating device is recommended.
Item No: Wire (mm) A (mm) B (mm) C (mm) Weight (kg.)
RLT13 13 720 225 180 14.5
RLT16 16 720 225 180 21.5
RLT19 19 720 225 180 21.5
RLT22 22 810 270 186 37
RLT25 25 810 270 186 37RLT25 25 810 270 186 37
RLT28 28 810 270 186 37
RLT32 32 963 297 188 56
RLT35 35 963 297 188 56
RLT38 38 963 297 188 56
Complete systems:
RLT + OL3000A Tensiometer + Amplifer (load limitation only)
RLT + P1001, D1002, D1004 Tensiometer + Display w. Amplifer (load indication and limitation)
RLT PAYOUTCOUNTER Payout counter.
Mounting Arm: Wire (mm) D (mm) E (mm) Weight (kg.)
RTL MOUNTINGARM1 13-19 810 1270 11
RTL MOUNTINGARM2 22-28 850 1320 11
RTL MOUNTINGARM3 32-38 850 1320 15
6
9. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Offshore Dynamometer
D2000E
• Robust aluminium construction. Very compact size.
• Highly accurate and reliable, ±0.5% FS accuracy.
• Environmentally sealed to IP66. IP67 as option.
• Transmission distance up to 200 m.
• For use with standard Crosby or Green Pin shackles.
The Dynamometer is as standard provided with handheld display and suitcase.
Specifications:
Radio Frequency: 2,4 GHz
Accuracy: ±0,05% FS
Input Resistance: 800 Ω
Output Resistance: 700 Ω
Compensated Temp. Range: -10° to 40°C
Operating Temp. Range: -20° to 60°C
Temp. Coefficient on Zero: <0,005 %FRO/°C
Temp. Coefficient on Span: <0,003 %FRO/°C
Safe Overload: 150%
Ultimate Overload: 400%
Insulation: >500 @ 100Vdc MΩ
Battery Life: Up to 200 hours.Battery Life: Up to 200 hours.
Item No: Capacity (T) A (mm) B (mm) C (mm) DØ (mm) E (mm) Weight (kg.)
D2000E-12T-S 12 120 105 41,5 38 239 2.0
D2000E-25T-S 25 131 125 55 53 284 4.5
D2000E-35T-S 35 147 138 55 60 335 5.5
D2000E-50T-S 50 170 150 75 73 375 10.0
D2000E-100T-S 100 228 220 120 100 500 28.0
D2000E-150T-S 150 300 260 120 110 550 50.0
D2000E-200T-S 200 325 290 159 135 660 75.0
D2000E-250T-S 250 365 304 189 145 720 90.0
7
10. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Shackle Pin
SHA-PIN
• Robust stainless steel pin & bobbin for use in hostile environments.
• Highly accurate and reliable, ±0.5% FS accuracy.
• Bobbin and anti-rotation bracket for centralized, accurate loading.
• Green Pin shackles. Crosby shackles as option.
• 4-20 mA output.
• Telemetry and cabled version, 10 mtrs cable.
To ensure the right fit shackles and load pins are always provided together.
Specifications:
Full load output: 2.0 nom. mV/V Accuracy: ±0.5% FS
Zero load output: <±2.0 % Repeatability: <0.10%
Excitation (Max): 10 (15) V Safe overload: 150%
Input resistance: 375 or 745 Ω IP class: IP66
Output resistance: 350 or 750 Ω
Compensated temp. Range: -10° to 40°C
Operating temp. Range: -20° to 60°C
Temp. Coefficient on Zero: <0.005 %Capacity/°C
Temp. Coefficient on Span: <0.003 %Capacity/°C
Insulation: >500 @100Vdec MΩ
Capacity: (T) A (mm) B (mm) C (mm) D (mm) L (mm) T (mm)
3,25 (only cabled) 75 40 16 19 57 273,25 (only cabled) 75 40 16 19 57 27
6,5 100 54 22 25,4 84 38
12 146 76 32 35 119 50
25 216 106 45 50 146 73
35 238 127 51 57 187 83
42,5 287 134 57 65 212 95
55 311 142 68 70 267 105
85 355 163 75 83 309 127
120 420 203 89 95 368 133
150 460 229 100 108 371 140
250 625 305 115 127 475 215
8
11. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Load Pin
LOADPIN-18000
• Combined load indication and load limitation system for hoisting devices,
cranes and overhead cranes.
• Designed according to customers specifications as direct
replacement for load bearing pins in lifting equipment.
• Provides the highest accuracy within weighing, ±0.1% FS accuracy.
• Robust stainless steel construction. IP68.
Specifications:
Capacity: 0.1 to 1000T
Proof load: 150 % of rated load
Ultimate breaking load: 500 % of rated load
Bridge resistance: 350/700/1000 ohms
Excitation: 5 to 10 volts (dc)
Output: 1.0 to 1.5 mV/V
Non-linearity: ±1 % typical
Non-repeatability: ±0.04 % optimum
IP class: IP67
Operating temp.: -20° to 70° C
Temp. Coefficient on Zero: <0.02 % Capacity/°C
Temp. Coefficient on Span: <0.02 % Capacity/°CTemp. Coefficient on Span: <0.02 % Capacity/°C
Signal cable: 5 mtrs. Polyurethane 4 core
Complete systems:
LOADPIN + OL3000A Tensiometer + Amplifer (load limitation only)
LOADPIN + P1001, D1002 Tensiometer + Display w. Amplifer (load indication and limitation)
Options:
∙ Special anti-rotation / locking plates ∙ Second redundancy gauge bridge ∙ Internal signal amplifier
∙ Single shear pins fully welded ∙ Submersible ∙ Internal greaseways plug / socket breakdown at pi
9
12. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Junction Box
JB02C-4-WB
• Junction Box fitted with electronic board for junction
and equalisation of 4 and 6 load cells.
• Fully encapsulated, water proof and moisture proof.
• Easy connection of the load cells.
• Not weight dependant.
Specifications:
Material: Cast aluminium housing. Protective coasting.
Load cell output resistance range: 340 to 1100 Ω
Load cell input resistance range: 340 to 1100 Ω
Excitation, recommended voltage: 5 to 20V (AC&DC)
Excitation, maximum: 30V (AC&DC)
Load cell sensitivity range: 0.6 - 3 mV/V
Cable Ø: 5 to 6.2 mm
Correction method: Excitation trim
Trimming range: 24 Ω
Temperature range, operating: -40° to 85°C
Housing connected to shield: Yes
External grounding: NoExternal grounding: No
IP Class: IP65
Item No: Amount of connections Dimensions (mm)
JB02C-4-WB 4 135 x 65 x 38
10
13. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
S Cell
S-CELL
• Suitable for hanging, hopper and other weighing devices.
• Tension and compression applications.
• Stainless steel construction.
• Highly accurate and reliable.
• IP 68.
Specifications: C3 OIML R60 C3
Output sensitivity (= FS): 2.0 ± 0.008 mV/V 2.0 ± 0.004 mV/V
Max. Numbr of load cell intervals: 3000
Ratio of min. LC verification interval: 7500 12000
Combined Error: ≤±0.0230 %FS
Min. dead load: 0%
Safe overload: 150%
Ultimate overload: 300%
Zero balance: ≤± 1.5% FS
Excitation, recommended voltage: 5 to12 V
Excitation maximum: 18 V
Input resistance: 350 ± 3 Ω
Output resistance: 350 ± 3 ΩOutput resistance: 350 ± 3 Ω
Insulation resistance: ≥5000 (at 50VDC) MΩ
Compensated temperature: -10 to 40 °C
Operating temperature: -35 to 65 °C
Storage temperature: -40 to 70 °C
Item No: Capacity Output W (mm) H (mm) Diameter (mm) M (mm)
S-CELL500KG-Z1 0.5T 2mV/V 32 25 Ø99 M12 x 1.75
S-CELL1000KG-Z1 1T 2mV/V 32 25 Ø99 M12 x 1.75
S-CELL2000KG-Z1 2T 2mV/V 32 25 Ø99 M20 x 1.5
S-CELL5000KG-Z1 5T 2mV/V 50 24 Ø99 M24 x 2
11
14. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Compression Cell
COMP
• Suitable for high precision applications such as dosing systems,
machines and other scale applications.
• Stainless steel construction. Welded cover.
• Highly accurate and reliable. ±0.25% accuracy.
• Low weight.
• Integral load button.
Specifications:
Full load output: 2.0 (±0.25%) mV/V
Zero load output: <±2.0%
Excitation (Max): 10 (15) V
Accuracy: <0.25%
Repeatability: <0.1%
Input resistance: 750 (±20) Ω
Output resistance: 700 (±2) Ω
Compensated temp.: -10 to 50 °C
Operating temp. Range: -20 to 70 °C
Temp. Coefficient on zero: <0.005 % capacity/°C
Temp. Coefficient on span: <0.005 % capacity/°C
Safe overload: 150%Safe overload: 150%
Insulation: >500 @ 100Vdc MΩ
IP class: IP68
Item No: Capacity (T) H (mm) B (mm) W (mm) R (mm) D (mm) T (mm) P (mm)
COMP0,5T 0.5 21 4 10 50 Ø59 M3x7 42
COMP1T 1 21 4 10 50 Ø59 M3x7 42
COMP2T 2 35 5 20 150 Ø98 M6x18 72
COMP5T 5 35 5 20 150 Ø98 M6x18 72
COMP10T 10 35 5 20 150 Ø98 M6x18 72
COMP20T 20 35 5 20 150 Ø98 M6x18 72
12
15. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Pressure Transducer
PRESSTRANS
• Economical pressure measurement.
• Sealed gauge operation.
• Resistant to transients and spikes.
• Robust stainless steel construction.
• IP 67
Specifications:
Capacities: 50, 100, 200, 250, 350, 500, 700, 1000 bar.
Full load output: 2.0 nom. mV/V
Zero balance: <±5.0%
Excitation (max): 10 (12) V
Accuracy: <0.2%
Repeatability: <0.10%
Input resistance: 350Ω
Output resistance: 350Ω
Compensated temp. Range: -10 to 40 °C
Operating temp. Rage: -20 to 60 °C
Temp. Coefficient on zero: <0.040 % Capacity/°C
Temp. Coefficient on span: <0.040 % Capacity/°CTemp. Coefficient on span: <0.040 % Capacity/°C
Safe overload: 150%
Insulation: >500 @100Vdc MΩ
Cable length: 4 mtrs.
Item No:
PRESSTRANS100B
Options:
∙ Other ranges and non-standard sizes available on request ∙ Cable or plug and socket ∙ Connector
∙ Amplified outputs (voltage or current)
13
16. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Bellows Bending Beam
BELLOWSBEAM
• Suitable for belt and tank weighing, bag fillers and platforms.
• Range 10-200 kg.
• Stainless steel construction, 17/4/PH.
• Hermetically sealed. Fully welded.
• 4 mtrs. Screened polyurethane cable.
• Easy installation.
Specifications:
Rated output: 2 ±0.1% mV/V
Accuracy class: 3000 n.OIML
Combined error: <±0.017%
Non repeatability: <±0.015%
Creep 30 mins: <±0.016%
Temp. effect on zero: <±0.001%/ °C
Temp. effect on span: <±0.001%/ °C
Compensated temp. Range: -10 to 40 °C
Operating temp. Range: -20 to 60 °C
Safe overload: 150%
Ultimate overload: 200%
Zero balance: <1%Zero balance: <1%
Input resistance: 400±20 Ω
Output resistance: 350±3 Ω
Insulation resistance: >5000 MΩ@100VDC
Supply voltage (nominal): 10 V
Max voltage: 15V
Item No: ØA ØB C D E F ØG
BELLOWSBEAM 42 34 20 24.5 53.5 42 8.2
ØH J K L M N P
27 10 82 120 18 10 30
14
17. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
ET Stainless Series
TD
• Highly accurate and reliable, ±0.1% FS accuracy.
• Robust high strength steel construction for use in hostile environments.
• For use with standard shackles.
• Sealed to IP 68.
• Supplied with 10 mtrs. Cable and full certificate of calibration.
Specifications:
Full Load Output: 1 (nominal) mV/V
Zero Load Output: <±2.0%
Excitation (Max): 10 (15) V
Repeatability: <0.05%
Input Resistance: 375 (±20) Ω
Output Resistance: 350 (±2) Ω
Compensated Temp. Range: -10 to 40 °C
Operation Temp. Range: -20 to 60 °C
Temp. Coefficient on Zero: <0.0010 %Capacity/°C
Temp. Coefficient on Span: <0.0010 %Capacity/°C
Safe Overload: 300%
Insulation: >500 @100Vdc MΩInsulation: >500 @100Vdc MΩ
Item No: Capacity (T) A (mm) B (mm) C (mm) D (mm) Dia. (mm)
TD1,5 1,5 175 110 70 17 16
TD2,5 2,5 185 120 70 25 20
TD5 5 185 120 70 25 26
TD7,5 7,5 200 135 75 25 35
TD10 10 270 170 90 30 36
TD12,5 12,5 270 170 90 30 39
TD15 15 270 170 90 30 43
TD20 20 350 220 120 50 52
TD25 25 350 220 120 50 52
15
18. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
BOLT-ON
BOLT-ON
• Cost effective solution for high capacity.
vessel/silo weighing applications.
• Robust construction.
• Simple installation.
• IP65.
• Supplied with 4 mtrs. Cable and all mounting accessories.
Specifications: BOSS-F BOSS-F
Full Load Output: 1.0 nom. mV/V @1000psi 20.0 nom. mV/V @1000psi
Zero Load Output: <±5.0% <±5.0%
Excitation (Max): 10 (15)V 10 (15)V
Accuracy: <0.25% <0.25%
Repeatability: <0.04% <0.04%
Terminal resistance: 350 nom.Ω 2100 nom.Ω
Deflection: <0.5 mm <0.5 mm
Compensated Temp. Range: -10 to 40 °C -10 to 40 °C
Operation Temp. Range: -20 to 60 °C -20 to 60 °C
Temp. Coefficient on Zero: 0.010% Capacity/°C 0.010% Capacity/°C
Temp. Coefficient on Span: 0.005% Capacity/°C 0.010% Capacity/°C
Safe Overload: 200% 200%Safe Overload: 200% 200%
Insulation: >5000@100Vdc MΩ >5000@100Vdc MΩ
Item No:
BOLT-ON
16
19. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Bin Lift Cell
BINLIFT CELL
• Designed for extremely high fatigue stress and impact loads
experienced in onbord vehicle weighing.
• Approved for commercial weighing to OIML R60 2000.
• Stainless steel construction. Fully welded.
• Ideal for hostile environments.
• High accuracy and durability.
• Excellent dynamic.
Specifications: DT4650
Accuracy class: 0.1% C3
Rated output 1.0 mV/V ±0,25% 0.88 mV/V
Combined error 0.1 %FRO
Non-repeatability: 0.02%FRO In accordance with
Creep (30 mins): 0.03%FRO OIML Class C3
Temp. coef. of zero: 0.005 %FRO
Temp. coef. of span: 0.002 %FRO
Safe overload: 150 % 150%
Ultimate overload: 300 % 300%
Zero balance: <1 <1
Input resistance: 380 (±30) Ω 380 (±30) Ω
Output resistance: 350 (±2) Ω 350 (±2) ΩOutput resistance: 350 (±2) Ω 350 (±2) Ω
Insulation: <5000 M Ω <5000 M Ω
Excitation (max): 10 (15) Volts 10 (15) Volts
Env. Protection: IP68 IP68
4-core screened cable: 2 mtrs. 2 mtrs.
Item No: Capacity A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm)
BIN LIFT CELL 1T 1T 56 35,5 75 127 139 95 46
BIN LIFT CELL 2T 2T 56 35,5 75 127 139 95 46
BIN LIFT CELL 5T 5T 56 35,5 75 127 139 95 46
17
20. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Silo Mount
SILOCELL
• Complete silo weighing solution incorporating lift off prevention
and silo expansion without compromising accuracy.
• Fully welded sensor.
• High tensile stainless steel type 17-4PH.
• High accuracy, durability and corrosion resistance.
• High resistance to off axis loads.
Specifications:
Capacity: 0,5T, 1T, 2T, 5T, 7,5T, 10T, 15T, 20T, 30T, 50T, 75T, 100T
Full Load Output: 2.0 (±0.25%) mV/V
Zero Load Output: <±2.0%
Excitation (Max): 10 (15) V
Accuracy (combined error): <0.05%
Repeatability: <0.01%
Input resistance: 750 (±20) Ω
Output resistance: 700 (±2) Ω
Compensated Temp. Range: -10° to 40°C
Operating Temp. Range: -20° to 60°C
Temp. Coefficient on Zero: <0.005 % Capacity/°C
Temp. Coefficient on Span: <0.003 % Capacity/°CTemp. Coefficient on Span: <0.003 % Capacity/°C
Safe overload: 150%
Insulation: >500 @100Vdc MΩ
IP Class: IP68
Cable Length: 10 mtrs.
Capacity (T) A (mm) B (mm) C (mm) D (mm) E (mm) ØF No.F G (mm) Mim. Exsp.
1-5T 105 150 94 124 88 13 8 12.7 3 mm
2-20T 140 200 125 165 117 18 8 18 4 mm
10-50T 175 280 175 230 162 22 8 25 6 mm
75T 240 300 190 250 184 26 12 25 6 mm
100T 250 320 230 300 210 26 12 30 8 mm
18
21. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Shear Beam
SHEARBEAM
• Suitable for floor scales, vehicle-test line, hopper
scales and other electronic weighing devices.
• Highly accurate and reliable.
• Stainless steel construction.
• Sealed to IP68.
Specifications: OIML R60 C3 OIML R60 C4 OIML R60 C5 OIML R60 C6
Output sensitivity (=FS): 2.0 ± 0.04 mV/V 2.0 ± 0.04 mV/V 3.0 ± 0.08 mV/V 3.0 ± 0.08 mV/V
Maximum capacity (Emax): 0.5T, 1T, 1.5T, 2T, 2.5T, 3T, 5T, 7.5T, 10T 0.5, 1, 1.5, 2, 2.5T
Max. Number of load cell interval: 3000 nLC 4000 nLC 5000 nLC 6000 nLC
Ratio of min. LC verification interval: 1000 15000 20000 20000
Combined Error: ≤± 0.0230 %FS ≤± 0.0175 %FS ≤± 0.0140 %FS ≤± 0.0116 %FS
Minimum dead load: 0% of Emax
Safe overload: 150% of Emax
Ultimate overload: 300% of Emax
Zero balance: <± 1.0% of FS
Excitation, recommended voltage: 5 to 12 V
Excitation maximum: 18 V
Input resistance: 350 ± 3.5 ΩInput resistance: 350 ± 3.5 Ω
Output resistance: 350 ± 3.5 Ω
Insulation resistance: ≥ 5000 (at 50VDC) MΩ
Compensated temp.: -10 to 40°C
Operating temp.: -35 to 65°C
Storage temp.: -40 to 75°C
Item No: Capacity (T) L x B x H (mm) ØD (mm) M
SHEARBEAM-xxT-z1 0.5, 1, 1.5, 2 130 x 31.3 x 31.3 13.5 M12
SHEARBEAM-xxT-z1 2.5, 5 171 x 36.8 x 36.8 20.5 M20
SHEARBEAM-xxT-z1 7.5, 10 222 x 49.5 x 49.5 26.9 M24
19
22. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Button Cell
BUTTON
• Capacities 500kN to 20kN.
• Robust, durable and very compact construction.
• Highly accurate and reliable. ±0.25% accuracy.
• Low height.
• Integral load button.
• Compression applications.
• Easy connection to the customers' applications.
Specifications:
Full load output: 2.0 (±0.25%) mV/V.
Zero load output: <±2.0%.
Excitation (Max): 10 (15) V.
Accuracy: <0.25%.
Repeatability: <0.01%.
Input resistance: 375 (±20) Ω.
Output resistance: 350 (±2) Ω.
Compensated temp.: -10°C to 40°C.
Operating temp. Range: -20°C to 70°C.
Temp. Coefficient on zero: <0.0015 % capacity/°C.
Temp. Coefficient on span: <0.002 % capacity/°C.
Safe overload: 150%.Safe overload: 150%.
Insulation: >500 @ 100Vdc MΩ.
IP class: IP65.
Item No: Capacity (kN) A (mm) B (mm) C (mm) D (mm) Options:
BUTTON0.5kN 0.5 15 7 0.5 4 Non-standard sizes available.
BUTTON1kN 1 15 7 0.5 4 Other ranges on request.
BUTTON2kN 2 15 7 0.5 4 Special mounting adaptors.
BUTTON5kN 5 30 11 0.5 4 Shunt calibration facility.
BUTTON10kN 10 30 11 0.5 4 Different temperature
BUTTON20kN 20 30 11 0.5 4 compensation available.
20
23. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Annular Load Cell
FORCE-WASHER
• Range 10kN to 200kN.
• Highly accurate and reliable.
• Robust, compact and low profile construction.
• Suitable for metric or imperial bolts.
• Compression applications.
• Easy connection to the customers' applications.
• Provided with 4 mtrs. cable length.
Specifications: Options:
Full load output: 1.0 nom. mV/V. Other ranges available on request.
Zero load output: <±1.0%. Full range of mounting options.
Excitation (Max): 10 (15) V. Non-standard sizes available.
Accuracy: <0.5%.
Repeatability: <0.10%.
Input resistance: 750 Ω.
Output resistance: 700 Ω.
Compensated temp.: -10°C to 40°C.
Operating temp. Range: -20°C to 60°C.
Temp. Coefficient on zero: <0.030 % capacity/°C.
Temp. Coefficient on span: <0.0050 % capacity/°C.
Safe overload: 150%.Safe overload: 150%.
Insulation: >500 @ 100Vdc MΩ.
IP class: IP66.
Item No: Capacity (kN) Bolt Size A (mm) B (mm) C (mm)
FORCE-WASHER10kN 10 M6 18 6.1 12
FORCE-WASHER20kN 20 M8 22 8.1 12
FORCE-WASHER40kN 40 M10 28 10.2 12
FORCE-WASHER80kN 80 M12 38 12.2 15
FORCE-WASHER100kN 100 M16 42 16.3 20
FORCE-WASHER120kN 120 M24 50 24.3 25
FORCE-WASHER160kN 160 M30 60 30.5 30
FORCE-WASHER200kN 200 M36 75 36.5 30
21
24. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Amplifier
OL3000A
• For overload protection on hoist, winches in lifting or
crane applications.
• The load cell amplifier is used in conjunction with load
cells as Static Line Tensiometers and Load Pins.
• Din rail mounted.
Specifications:
Accuracy: <0.1%
Output: 4-20 mA
Features: Relays (n0) triggers at a user set level.
Weight: 0.20 kg.
Item No: Output Relay Output Dimensions
OL3000A-230 230 VAC 4-20 mA 2 54 x 90 x 61 mm
OL3000A-48 48 VAC 4-20 mA 2 54 x 90 x 61 mm
OL3000A-115 115 VAC 4-20 mA 2 54 x 90 x 61 mm
OL3000A-24 24 VDC 4-20 mA 2 54 x 90 x 61 mm
OL3000A-SUM 230 VAC 2 x 4-20 mA 2 54 x 90 x 61 mm
22
25. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Panel Meter
P1001/6
• Vetec Panel Meter Display is ideal in combination with load cells.
• Clear, variable brightness display.
• Provided with and without Relay output (alarms) and special output options.
• Very easy to programme and use. No-menu programming.
• High precision and long term reliability.
Specifications:
Digits: 6 digits. 14 mm digit height.
Viewing: Up to 7m away.
Input signals: • Load cells
• 4-20mA, 0-10V, 1-5V etc.
• Serial Data RS232, RS485 etc.
Output options: • 2 or 4 alarms SPST relays, 2x SPDT.
• 4-20mA, 0-10V or -10 to +10 analog.
• RS232, RS485, Modbus, Ethernet. RTU Modbus for Tiger G2.
IP Class: IP65 front.
Materials: 1/8 DIN format case. Black polycarbonate.
Case dimensions: W 96 x H 48 x L136 mm, (±1mm)
Item No.: Digits Digit height Power Supply Analogue Output Relay OutputItem No.: Digits Digit height Power Supply Analogue Output Relay Output
P1001/6-L-R-AC-0 6 14 mm 95-265 VAC - 0
P1001/6-L-R-DC-0 6 14 mm 11-30 VDC - 0
P1001/6-L-ANI-R-AC 6 14 mm 95-265 VAC 4-20 mA 0
P1001/6-L-ANI-R-DC 6 14 mm 11-30 VDC 4-20 mA 0
Item No.: Digits Digit height Power Supply Analogue Output Relay Output
P1001/6-L-AL2-R-AC 6 14 mm 95-265 VAC - 2
P1001/6-L-AL2-R-DC 6 14 mm 11-30 VDC - 2
P1001/6-L-ANI-AL2-R-AC 6 14 mm 95-265 VAC 4-20 mA 2
P1001/6-L-ANI-AL2-R-DC 6 14 mm 11-30 VDC 4-20 mA 2
Item No.: Digits Digit height Power Supply Analogue Output Relay Output
P1001/6-L-ANI-R-AC 6 14 mm 95-265 VAC 4-20 mA 0
P1001/6-L-485-R-AC 6 14 mm 95-265 VAC RS485 0
P1001/6-L-RTU-R-AC 6 14 mm 95-265 VAC MODBUS RTU (Tiger) 0
P1001/6-L-A2-RTU-R-AC 6 14 mm 95-265 VAC MODBUS RTU (Tiger) 2
* The listed examples are all with load cell input.
Other displays can be provided to meet specific requirements
and applications.
23
26. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Large Display
D1002, D1004
• Vetec Large Display is ideal in combination with load cells.
• Provided with and without Relay Output (alarms) and
special output options.
• Remote setting from ground level.
• Very easy to programme and use. No-menu programming.
Specifications:
Digits: Available with 4 and 6 digits.
Input signals: • Load cells.
• 4-20mA, 0-10V, 1-5V etc.
• Serial Data RS232, RS485, 422 etc.
Output options: • 2 or 4 alarms SPST relays, 2x SPDT.
• 4-20mA, 0-10V or -10 to +10 analog.
• RS232, RS485, Ethernet data output.
IP Class: IP65 for bottom glands, IP54 for top.
Materials: Black polycarbonate.
Examples, all with load cell input.
Item No.: Digits Digit height Viewing Power Supply Relay Output Analogue OutputItem No.: Digits Digit height Viewing Power Supply Relay Output Analogue Output
D1002/4-L-R-AC-3 4 57 mm 25 mtrs. 95-265 VAC 0 -
D1004/4-L-R-AC-3 4 102 mm 50 mtrs. 95-265 VAC 0 -
D1004/6-L-R-AC-3 6 102 mm 50 mtrs. 95-265 VAC 0 -
D1004/6-L-R-48VAC-3 6 102 mm 50 mtrs. 48 VAC 0 -
Item No.: Digits Digit height Viewing Power Supply Relay Output Analogue Output
D1002/4-L-AL2-R-AC-3 4 57 mm 25 mtrs. 95-265 VAC 2 -
D1004/4-L-AL2-R-AC-3 4 102 mm 50 mtrs. 95-265 VAC 2 -
D1004/6-L-AL2-R-AC-3 6 57 mm 25 mtrs. 95-265 VAC 2 -
D1004/6-L-AL2-R-48-3 6 102 mm 50 mtrs. 48 VAC 2 -
Item No.: Digits Digit height Viewing Power Supply Relay Output Analogue Output
D1004/4-L-ANI-AC-3 4 102 mm 50 mtrs. 95-265 VAC 0 4-20Ma
D1004/4-L-485-AC-3 4 102 mm 50 mtrs. 95-265 VAC 0 RS485
D1004/4-L-A2-RTU-AC-3 4 102 mm 50 mtrs. 95-265 VAC 2 MODBUS RTU
D1004/6-L-A2-RTU-AC-3 6 102 mm 50 mtrs. 95-265 VAC 2 MODBUS RTU
* Other displays can be provided to meet specific requirements and other applications.
24
27. Address
Lucernemarken 18 A
DK-5260 Odense S
Bank
Nykredit Bank
Bank Account
DKK 8117-4522421
EUR 8117-9653680
IBAN no.
DKK DK7681170004522421
EUR DK1981170009653680
SWIFT code
NYKBDKKK
VAT no.
27414621
www.vetec.dk
Telephone
+45 6590 5802
Mail
post@vetec.dk
Remote Controls
TIGER G2
• Tiger G2 has been developed for radio controlled lifting applications,
e.g. EOT cranes, container cranes and more.
• Transmitters with display show load indication when combined
with our complete load cell systems.
• For maximum load control and safety.
Specifications:
Channels: 69.
Approvals: The stop function and two relays in the receivers are approved
according to SIL3 IEC 61508 standard and PLe.
IP Class: Transmitters and receivers are approved according to IP65.
TG-T9 transmitters are approved according to IP66.
All receivers IP66.
Item No.: Frequency Channels Buttons
TG-T9-2 433 MHz, 915 MHz and 2,4 GHZ 69 6
TG-T11-4 433 MHz, 915 MHz and 2,4 GHZ 69 10
TG-T12-20 433 MHz and 915 MHz 69 Joystick
TG-T12-21 433 MHz and 915 MHz 69 JoystickTG-T12-21 433 MHz and 915 MHz 69 Joystick
Item No.: Frequency Channels Relays
TG-R4-1 433 MHz, 915 MHz and 2,4 GHZ 69 2+7
TG-R4-6 433 MHz, 915 MHz and 2,4 GHZ 69 2+17
TG-R9-11 433 MHz and 915 MHz 69 2+2+28
25