4.ニッケル水素電池のスパイスモデル

Contents ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011

3. Concept of the Model ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 + - Output Characteristics

4. Parameter Settings ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 Model Parameters: (Default values)

5. Ni-Mh Battery Specification (Example) ,[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 Battery capacity [Typ.] is input as a model parameter Nominal Voltage 1.2V Capacity Typical 1350mAh Minimum 1250mAh Charging Current  Time 1350mA  about 1.1h Discharge cut-off voltage 1.0V

5.1 Charge Time Characteristic ,[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 (min.) Measurement Simulation SOC=0 means battery start from 0% of capacity (empty) Charge: 1350mA

5.1 Charge Time Characteristic  Simulation Circuit and Setting ,[object Object],[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 1 minute into a second (in simulation) Charge Voltage A constant current charger at rate of capacity (e.g. 1  1350mA)

5.2 Discharge Time Characteristic ,[object Object],[object Object],[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 0.2C 1C 2C (min.) TSCALE turns 1 minute into a second(in simulation), battery starts from 100% of capacity (fully charged) ,[object Object]

5.3 V bat vs. SOC Characteristic ,[object Object],[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 2700mA Measurement Simulation Simulation 1350mA 270mA

5.3 V bat vs. SOC Characteristic  Simulation Circuit and Setting ,[object Object],[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 A constant current discharger at rate of capacity (e.g. 1  1350mA) 1 minute into a second (in simulation)

6. Extend the number of Cell (Example) ,[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 The number of cells in series is input as a model parameter Basic Specification Ni-MH needs 7 cells to reach this voltage level ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]

6.1 Charge Time Characteristic, NS=7  Simulation Circuit and Setting ,[object Object],[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 Charge Voltage 1 hour into a second (in simulation)

6.2 Discharge Time Characteristic, NS=7  Simulation Circuit and Setting ,[object Object],[object Object],[object Object],[object Object],All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 Parametric sweep “rate” for multiple rate discharge simulation 1 hour into a second (in simulation)

Simulation Index All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 Simulations Folder name ,[object Object],[object Object],[object Object],[object Object],[object Object],Charge_Time Discharge_Time Discharge_SOC Charge_Time(NS) Discharge_Time(NS)

4.ニッケル水素電池のスパイスモデル

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Was ist angesagt?

Was ist angesagt? (19)

Ähnlich wie 4.ニッケル水素電池のスパイスモデル

Ähnlich wie 4.ニッケル水素電池のスパイスモデル (18)

Mehr von Tsuyoshi Horigome

Mehr von Tsuyoshi Horigome (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

4.ニッケル水素電池のスパイスモデル