FEM Product Line Card

FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, Alberta
Telephone: (587) 409-4093
Email: info@f-e-m.ca
Product Overview

Spoolers
Telephone: (587) 409-4093
Our spoolers can be truck mounted, trailer
mounted, or skid mounted - enabling operation
both in the field and in the shop.
The multispooler is a trailer mounted piece of
equipment made to spool and unspool cable
from cable reel. Being able to accommodate
up to 6 spool simultaneously, the multispooler
is essential for handling downhole control
equipment with multi-sensors. This FEM
designed machine is the first of it's kind in the
industry. All the spools are run by individual
hydraulically driven motors controlled from a
control panel.
To build a multispooler able to handle 6
spools simultaneously, each spool has a
predefine maximum speed and maximum
torque to be able to control the speed and
torque of every spool independently. Our
multispooler is continuously being improved
in tandem with field operations - adjusting
our design parameters as needed to meet
operational requirements.
Du-Spooler
Uni-Spooler
Hexa-Spooler
Tri-Spooler

Collapsible Reel
FRONTIEREquipment Manufacturing
Telephone: (587) 409-4093
q p gEquipment Manufacturing
Single Pocket
Double Pocket
Standard Conﬁgurations

Capabilities
Features
Fully Self-Contained and fits into most long-box trucks
Sturdy design maximize weld alignment and concentricity
High air capacity with increased CFM for better quenching
Limit switch for automated displacement
Hydraulic System controlled with remote
Pin Storage box and 2 toolboxes
Heated oxy-acetylene bottles
Actuated slide-out/slide–in Repairs to broken rod
Replacement of top or bottom pin
Custom pin to pin string fabrication
Removal & replacement of worn sections of rod
FFW
Telephone: (587) 409-4093

Pinch Roll + Shear
Telephone: (587) 409-4093
Fits in standard 1-tonne pickup truck
Electric over hydraulic remote control
Total self contained
Stabilize outriggers
Hydraulic Tank
Rod Shear
Generator
Actuated Slide Out
Electrical Control Box

RPU
Telephone: (587) 409-4093
Standard Features
Totaly self contained unit in enclosed trailer
All equipment slides out for easy access
20 ft trailer
Hydraulic power unit
Air comporessor
Generator
Oxy-Acetylene bottles
Pinch-Roll + Shear
Rod Welder
3 Rod handling arms
Air Compressor
Hydraulic Power Unit
Generator
Rod Cleaning Device Pinch-Roll and Shear Forging Welder

RMU
Telephone: (587) 409-4093
Standard Conﬁgurations
Tri-axles
Tandem drive
Fit any truck chasis
Speciﬁcations
Speed: 40m/min (125 ft/min)
Capacity: up to 25 000 lbs of rod (10 000 kg)
DOT approved
Standard Features
2 hydraulic safety arm
Driving motor
Spool braking system
Telescopic rod guide stand
Pinch roller (slide out)
Rod shear (slide out)
3 ton picker crane
Service reel rack (tiltable)
2 tool boxes
1 cabinet
Optional Features
Rod counter
Rod welder (only available on tri-axles
Wireless remote
Pivoting pinch roller and shear
High capacity picker crane
Tow behind hitch
Collapsible reel
Transport reel
Reel Accessories
Devil clamp
Reel pivoting stand
DOT approved 1 cabinet
Optional Features
Rod counter
Rod welder (only available on tri-axles

Hydraulic Spool Tilt (12V hydraulic power unit)
2 safety arms (pivoting or folding)
Telescopic rod guide stand
Foldable wide load light
Spool tilt locking arm
Rod Shear
Pinch Roller
Spool driver motor
Spool braking system
Hydraulic Safety Arms
Standard FeaturesStandard Features
p )
ng)
Spo
Spoo
Hydra
Pintle-Hitch Trailer
B-Train
Optional Features
FRONTIEREquipment Manufacturing
Telephone: (587) 409-4093
Trailers
RMU
Pintle-Hitch Trailer
#106 3921 81 Ave Leduc Alberta
Single Fifth WheelDouble Spool Trailer

Flushby
Telephone: (587) 409-4093
General workover operation for Sucker rods down hole string
Well stimulations
Assembling/disassembling of completions
Preparation of production wells for special treatment
Pump and circulation operations
General Operation
General Features
Heavy duty ai suspensions
60 series Detroit engine set between 420-500 HO
to customer specifications
Allison 4700 oilfield service transmission
High and Low pressure manifold
Leveling jacks
Guards and covers for all moving components
Mast with crown block
Drawworks winch
Auxilliary winch
Triplex high pressure pump
2 fluid tanks with additional 400L tank
Fall arrest device located at crown
Crane
Fassi M20A.13
3 Hydraulic sections
Corner mount articulating crane
Lifting capacity of 3525 lbs at 4'5"
Lifting capacity of 1135 lbs at 13'3" (full extension)
Hydraulic
3000 PSI hydraulic system
Hydraulic tank
Touch screen control
Vacuum cleaner
High pressure filters
Valve flow adjustment
Compensation pump
Return filters
Accumulator system
Mast
Center piece : Telescopic
Max Length: 46 ft
Free height over ground : 55 ft
Max work length : 44 ft
Max hook load : 440,000 lbs
Mast grade : 9 deg
Pumps
Triplex Pump :
SPM TWS 600
Plunger diameter: 3:
Drive: hydraulic
Max input: 600 BHP/447 kW
Strok: 6:/152.4mm
Loading Pump :
Gear pump
Q max: 800 l/min
p max: 7 bar
Booster Pump :
Centrifugal pump
Q max: 1000 l/min
p max: 5 bar
Winches
Main Winch :
Pullmaster HL25
25,000 lbs single line pull in low gear
5,350 lbs single line pull in high gear
Meets API 7K, ISO 14693, API SPEC Q1,
ISO - TS 29001
Secondary Winch :
Pullmaster PL5
4000 lbs capacity

Standalone Rig
Telephone: (587) 409-4093
Slanted operation
Operator protection system
Touch screens and joysticks
Remotely operated safety locking system
Electric over hydraulic system saves 2/3 of hydraulic hoses
Optical Reader (diameter, speed, length) - realtime pull load and feed
Integrated H2S detection system with visual, auditory and remote alarms
Built-in working lights
Standard Features

FEM Product Line Card

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Andere mochten auch

Andere mochten auch (14)

Ähnlich wie FEM Product Line Card

Ähnlich wie FEM Product Line Card (20)

FEM Product Line Card