3. Specific learning objectivesSpecific learning objectives
1.Definition and importance of Retention , stability and
support in complete denture.
2.Factors affecting Retention , stability and support in
complete denture.
6. RETENTIONRETENTION
• It is the resistance to removal of a dental
prosthesis in a direction opposite to that of
insertion. (GPT8)
• BOUCHER described retention as the most
spectacular yet probably the least important of
all complete denture objectives. This property
may indeed be least important, it provides
psychologic comfort to patient..
16. Biologic factors
Intimate tissue contact :–
It is the biologic factor that refers to the close
adaptation of the denture base to the
underlying soft tissues.
17. STABILITY
• “The resistance against horizontal movements
and forces that tends to alter the relationships
between the denture base and its supporting
foundation in horizontal or rotatory direction.”
(GPT8)
18. • In simpler words stability is defined as “the
quality of a denture to resists displacement by
functional stresses.”
19. The qualities necessary to create and
maintain stability are dependent
upon the following factors :-
1) Vertical height of residual ridge
2) Quality of soft tissue covering the
ridge
3) Adaptation of denture to the tissue
4) Occlusal plane
5) Teeth arrangement
6) Contour of polished surface
20. Vertical height of the
residual ridge
•Stability decreases with loss of vertical
height of the ridge
21. Quality of soft tissue
covering the ridge
• Flabby ridges provide poor stability
22. Adaptation of denture to the
tissues
• Close adaptation of the denture to the
basal seat tissues is very important to
ensure proper stability. An accurate
impression is essential to achieve this.
23. Occlusal Plane
• Should be oriented parallel to the ridges
and should divide the interarch space
equally.
24. • An occlusal plane if too high
• Forces the tongue into new position i.e. higher position
• Loss of tongue accuracy.
• Causes raise of floor of mouth.
• Undue pressure on the border of the lingual flange
• Partial loss of border seal.
25. • An occlusal plane slightly low
• Causes no problems for denture patients.
26. • If Occlusal plane is too low
• Destabilizes the denture
28. Contour of the polished
surface
•The polished denture surface should be in
harmony and with the functioning of oral
muscles to promote stability.
29. Concept of Neutral Zone by Fish
• Neutral zone is a
potential space
between lips and
cheeks on one
side and tongue
on the other where
natural or artificial
teeth are
subjected to equal
and opposite
forces from
surrounding
muscles.
30. Education of the patient
• Every patient should be informed regarding the care &
proper use of his denture.
• Failure to heed the dentist’s advice will eventually lead
to damage to the supporting tissues.
• It is usually obvious to them that their failure to master
their denture problem in not the fault of the dentist but
rather the fault of their own inability to master the
normal tongue position
31. SUPPORT
• The foundation area on which a dental
prosthesis rests.
• With respect to dental prosthesis, the
resistance to displacement away from the basal
tissue or underlying structure. (GPT-8)
32. • Complete denture support is “the
resistance to vertical movement of the
denture base towards the ridge.”
• To provide adequate support, the denture
base should cover as much as denture-
bearing area as possible. This distributes
the forces over a large area and is known
as SNOWSHOE PRINCIPLE
33. SNOWSHOE PRINCIPLE
• The basic “snowshoe principle” of maximal
extension is applied for support.
• It states that given a constant occlusal force, a
broader denture-bearing area decreases the
stress/unit area under the denture base.
34. Take home message……
• SUPPORT, STABILITY & RETENTION are
very important features in complete denture
fabrication that ensure the best possible
treatment for the patient, carefully conserving
what remains & replacing what is lost.
35.
36. MCQsMCQs
1.1. Adequate retention in complete dentureAdequate retention in complete denture
provides?provides?
a. Physiologic comforta. Physiologic comfort
b. Psychological comfortb. Psychological comfort
c. Physical comfortc. Physical comfort
d. Longivityd. Longivity
37. 2. Which of the following factor is primarily2. Which of the following factor is primarily
essential for longevity of complete denture?essential for longevity of complete denture?
a.a.RetentionRetention
b.b.StabilityStability
c.c. SupportSupport
d.d.EstheticsEsthetics
38. 3. The factor necessary in complete denture to be3. The factor necessary in complete denture to be
firm , stable and constant while resistingfirm , stable and constant while resisting
horizontal and chewing forces is?horizontal and chewing forces is?
a.a.RetentionRetention
b.b.StabilityStability
c.c. SupportSupport
d.d.EstheticsEsthetics
39. 4. BOUCHER4. BOUCHER described which factor as the mostdescribed which factor as the most
spectacular yet probably the least important ofspectacular yet probably the least important of
all complete denture objectives?all complete denture objectives?
a.a.RetentionRetention
b.b.StabilityStability
c.c. SupportSupport
d.d.EstheticsEsthetics
40. 5.5. Physical force involved in the attraction
between unlike molecules is known as?
a.Cohesion
b.Adhesion
c.Surface tension
d.Capillary attraction
41. 6. The quality to resist separation possessed by
the film of liquid between two well adapted
surfaces is known as?
a.Cohesion
b.Adhesion
c.Surface tension
d.Capillary attraction
42. 7. Snowshoe principle is related with?
a.a.RetentionRetention
b.b.StabilityStability
c.c. SupportSupport
d.d.EstheticsEsthetics
43. 8. Neutral zone concept was given by?8. Neutral zone concept was given by?
a. Bouchera. Boucher
b. Neilb. Neil
c. Fishc. Fish
d.Winkler.d.Winkler.
44. References
•Textbook of prosthodontics –
V
RANGARAJAN, T V PADMANABHAN
•Posthodontic treatment for edentulous patients
– ZARB,JACOB,HOBKIRK,ECKERT
•Essential of complete denture prosthodontics –
Sheldon Winkler
