This document provides information about electronic jacquard machines and related software and controllers. It describes several models of electronic jacquard machines, including their main technical specifications and applications. It also summarizes jacquard CAD software that is used for fabric design, and loom controllers that control various types of looms. The document is from a company that manufactures and sells these electronic jacquard and weaving products.

1. Breif Introduction About Electronic
Jacquard Machine
Breif Introduction About Electronic
Jacquard Machine
---Electrical Automation Institute of Zhejiang University
Hangzhou Wumu Technology Co.,Ltd.
Email: sales@hzwmkj.com
Whatsapp/Mobile:+8613756117864
Website: http://www.hzwmkj.com/en/#

2. 目录
WMF/WME/WM/WMZ Series Of Electronic Jacquard Machine 1
Electronic Jacquard CAD Software
Loom Controller 2
3

3. Electronic Jacquard Machine Model WMF
Main Technical Parameters
 Item Electronic Jacquard Machine
 Model 1344 hooks,2688 hooks,6144 hooks
 Rotate Speed Upto 500 rpm
 Shedding Form double-lift,clear open-shed
 Shedding Height Front shed width 44-91mm. Back shed width 61-113 mm with easy
adjustment.
 Driving Mode Eccentric driving mode +Verticle-shaft.

4.  CHARACTERISTICS
Electronic jacquard machine is in high cost performance and specializd
in weaving machine in high-speed. Using self-designed high-effective
solenoid board, it has better reliability and longer service life. By taking
advantages of national patents and improving mechanical transmission
system based on mature technology, it enhances the ability of load,
decrease the noise and get better reliability. In addition, 24 needles
arrangement is so convenient for maintenance.

5. Strong lifting gear
can ensure that the
needle-selection
system work stably
in high-speed
Multi-position
adjustable CAM
selvage mechanisms
make the selection of
weaving selvedge be
very convenient.
Eccentric driving
mechanism ensures
electronic jacquard
machine moving in
high-speed
Precisely balanced
double motion type
lifts, eliminating
the mechanical
unbalanced load.
The simple
way to adjust
knife height
and shed size
system brings
convenience to
weave.
Mechanism

6. Main Application
Fabric Suitability: Suitable for most jacquard-weaving applications such as
trademarks, ties, terry cloths, decorative fabrics,curtain cloth, sofa cloth and all
kinds of jacquard fabrics.
Field of application: It can be matched with kinds of Chinese or domestic rapier
loom,air jet, water-jet and towel weaving machines.

7. Outlook

9. Patents

10. Electronic Jacquard machine Model WME
 Type:WME1344 Hooks,WME2688 Hooks
 Rotate speed: 300 rpm
 Selection Method: drive circuit board+solenoid board+sheet steel+lifting
knife
 Shedding form: double motion type fully-open shed.
 Transmission Type: vertical-shaft +gear box
 Note: Other specifications can be made according to customers requirements
Characteristics
 Easy adaption and versatile, user-friendly, minimal maintainence.
 Range of Application
 Be widely used in weaving of trade marks, tie, towels, table clothig and other
jacquard fabrics..

12. Electronic Jacquard Machine Model WM
 Type: WM256, WM312, WM400, WM480, WM600, WM960, WM1408
 The highest shed frequency: 120 RPM.
 Selection method: solenoid board (national patent) + drive circuit board +vertical
needle+ sheet steel.
 Sheding form: single motion type & fully-open shed
 Sheding height: Front shed height range is 73-100mm. Back shed height range is 86-
110mm with easy adjustment.
 Transmission Type: Vertical-shaft.
 Note: additional specifications can be made basing on customer requirements.
Characteristics: Specialized in the electronic jacquard machine in low-speed. By taking
advantages of national patents, it is the common machines in the market that have structural
optimization, the smallest volume and longer life. In addition, it is cheaper and runs reliably.

13. RANGE OF APPLICATION:
Specializing in cooperation with all kinds of shuttle looms and sample looms. It
is appropriate to labels, the scarf for Arab and samples for weaving.

14. Electronic Jacuqard Machine Model WMZ
 Type: WMZ1536, WMZ3072, WMZ6144, WMZ8192, WMZ12288, WMZ2688S,
WMZ4560S, WMZ6144A
 The highest rotate speed: 500 RPM.
 Selection method: component+ module board+ lifting knife
 Sheding form: double motion type & fully-open shed
 Sheding height: Front shed height range is 46-95mm. Back shed height range is 61-
119mm with easy adjustment.
 Transmission Tape: Vertical-shaft.
CHARACTERISTICS
It takes advantages of many national patents. This component type of electric magnetic
needle system makes the jacquard machine be more efficient. Quick interface compatible
technology with mature and adjustable shed design makes dismantling, maintenance and
adjustment be more convenient. High intensity alloy lifting knife can meet the need of
high speed and load. Numerous needles and species make this series of jacquard machine
can adapt to broad width fabric weaving requirements.

15. RANGE OF APPLICATION
Matching with all kinds of trademark machines, rapier looms and double shed
carpet looms. It is suitable for tie, silk, towel and a variety of fabrics weaving.
WMZ2688S and WMZ4560S are the double shed carpet looms specialized in
producing moquettes and carpets.

16. Rapier Loom Controller
Products Brief Introduction
Rapier loom integrated system regards industrial personal computer as the control
core. It is made up of control ca1/binet, control panel, power interface board, power
system, human-computer interface, photoelectrical encoder system and indicator
lamp products etc. It has wide function as electronic let-off, electronic take-up
system, electronic dobby, electronic color selection etc. It uses 5.7 inches LED
screen to show its working state as angle, speed, output etc. The reasonable software
and hardware and also friendly interface bring us advanced technology, complete
function, good stability and well control.

17. Main Functions
 Set and change the working parameters and angle.
 Warp stops, weft stops, and automatic location in case of broken-weft and provide
for the loom.
 Auto picks finder and manual in all directions.
 Electronic let-off and electronic take-up system is to avoid the operation trail.
 Automatically adjust to weft sensitive detection technology and double needle
detection technology.
 Support electronic dobby and jacquard.
 Manage cloth.
 Shows the signals of production data and failure alarm.
RANGE OF APPLICATION
This loom control system is used for controlling all kinds of dobby looms, rapier looms
and also for upgrading and updating the imported second-hand looms.

18. Rug-overtufting Machine Control System
2 31
PRODUCT SPECIFICATION
This loom consists of host computer and slave computer. It shows in the weaving
carpet design, speed, output and running condition in time. It also has a lot of
functions as friendly operation interface, reasonable software and complete
functions, high accuracy and reliable movement.
MAIN FUNCTIONS
 Set the working parameters
 Protect the breakpoint
 Set any sizes for the carpet and no need to change the design if do not change
weft density.
 Single needle has four functions as cut pile, high-low-loop etc.
 Shows the signals of production data and failure alarm.
 Maintains and adjusts the system.
 Set any point to start the weaving for carpet
RANGE OF APPLICATION
This controller is used for most of domestic and foreign rug-overtufting machines.
PRODUCT SPECIFICATION
This loom consists of host computer and slave computer. It shows in the weaving
carpet design, speed, output and running condition in time. It also has a lot of
functions as friendly operation interface, reasonable software and complete
functions, high accuracy and reliable movement.
MAIN FUNCTIONS
 Set the working parameters
 Protect the breakpoint
 Set any sizes for the carpet and no need to change the design if do not change
weft density.
 Single needle has four functions as cut pile, high-low-loop etc.
 Shows the signals of production data and failure alarm.
 Maintains and adjusts the system.
 Set any point to start the weaving for carpet
RANGE OF APPLICATION
This controller is used for most of domestic and foreign rug-overtufting machines.

19. Jacquard CAD Software
PRODUCT SPECIFICATION
It has powerful graphic design and perfect textile process. Jacquard CAD software
is suitable for labels, silk, towel carpet, tie, furnishing cloth jacquard weaving etc.
It is the earliest enterprise to specialize in jacquard CAD software research and
promotion. It is the top sale products in the domestic market and also has the
widest influence that beloved by so many customers. It won reward of National
Science and Technology Progress and this technology has reached the world
advanced level.

20. 3
MAIN FUNCTIONS
 The technique for scanning and connection and also slant correction.
 Draw all kinds of geometric figures as circle, ellipse, line, mimic curve etc.
 Copy. It can rotate any angles and change warp and weft.
 Efficient editor can add and delete any warp and weft and also divide and combine them.
 Magnification the hardware. Zoom lens and inspect everywhere.
 Selvage selvedge for inside, outside, up. down, left, right.
 Automatic and manual control of the length of yarns.
 Restore the part infinitely.
 Weave single layer fabric and double layers of fabric and also complex designs.
 Customers can use the standard organization database any time. Editing and store the
composite organization according to their need.
 Accurate analysis of weaving with ep /jc5 etc.
 Strongest design and message-processing function.
 Free organization and changeable organization starting point.

21. 1
Fabric Simulation CAD
PRODUCT SPECIFICATION
Jacquard Fabric Simulation System is the virtual reality using computer graphic technology.
This key technology is the advanced international level for digital textile weaving. Very
vivid effects can enhance the competition for development and creativity for textile
enterprise. The simulation design is used for silk, tower, tie, fabric weaving etc.

22. MAIN FUNCTIONS
 Professional yarn design functions. Configuring the yarn parameter to get the numbers
you want.
 Stimulation different kinds of yarns like nubby yarn etc.
 Practical yarn selection to satisfy the need of different quantity and thickness for warp
and weft.
 Simulation according to general circulation models or weft density parameter.
 Show the vivid weaving vivid of expression on the computer.

23. Thank You
Hangzhou Wumu Technology Co.,Ltd.
Email: sales@hzwmkj.com
Whatsapp/Mobile:+8613756117864
Website: http://www.hzwmkj.com/en/#
Thank You
Hangzhou Wumu Technology Co.,Ltd.
Email: sales@hzwmkj.com
Whatsapp/Mobile:+8613756117864
Website: http://www.hzwmkj.com/en/#