Suche senden
Hochladen
Machine Drawing 0135090520 ppt02
•
Als PPT, PDF herunterladen
•
9 gefällt mir
•
5,556 views
Sreesh P Somarajan
Folgen
Engineering Drawing
Weniger lesen
Mehr lesen
Ingenieurwesen
Business
Bildung
Melden
Teilen
Melden
Teilen
1 von 32
Jetzt herunterladen
Empfohlen
Engineering drawing
Engineering drawing
Selva Prakash
Engineering drawing
Engineering drawing
Latif Hyder Wadho
Engineering Drawing basics.ppt
Engineering Drawing basics.ppt
DIEMS Aurangabad
Dimensioning
Dimensioning
SK MD RAIJUL HAQUE
Introduction to engineering graphics
Introduction to engineering graphics
Suraj Meshram
Basics Of Engineering Drawing (Dimensioning,Projections,Principle Views)
Basics Of Engineering Drawing (Dimensioning,Projections,Principle Views)
Adnan Aslam
Chapter 03 orthographic projection
Chapter 03 orthographic projection
Ravi Patel
Engineering graphics basics
Engineering graphics basics
PERIYASAMY RAJENDRAN
Empfohlen
Engineering drawing
Engineering drawing
Selva Prakash
Engineering drawing
Engineering drawing
Latif Hyder Wadho
Engineering Drawing basics.ppt
Engineering Drawing basics.ppt
DIEMS Aurangabad
Dimensioning
Dimensioning
SK MD RAIJUL HAQUE
Introduction to engineering graphics
Introduction to engineering graphics
Suraj Meshram
Basics Of Engineering Drawing (Dimensioning,Projections,Principle Views)
Basics Of Engineering Drawing (Dimensioning,Projections,Principle Views)
Adnan Aslam
Chapter 03 orthographic projection
Chapter 03 orthographic projection
Ravi Patel
Engineering graphics basics
Engineering graphics basics
PERIYASAMY RAJENDRAN
Basic introduction to Engineering Drawing
Basic introduction to Engineering Drawing
Tariku Dessie
Engineering drawing unit 1-snist
Engineering drawing unit 1-snist
Kunduru Srinivasulu Reddy
Isometric drawings
Isometric drawings
dean dundas
Chapter 6 by lelis
Chapter 6 by lelis
LelisoHobicho
Engineering Drawing: Chapter 05 pictorial sketching
Engineering Drawing: Chapter 05 pictorial sketching
mokhtar
Working Drawings
Working Drawings
عمرو خليل
Isometric View of an Object
Isometric View of an Object
Ahmad Hassan
Introduction to Engineering and profession Ethics Lecture6-Engineering Standa...
Introduction to Engineering and profession Ethics Lecture6-Engineering Standa...
Dr. Khaled Bakro
First and third angle projection
First and third angle projection
Safiullah Khan
Engineering drawing graphics
Engineering drawing graphics
Selva Prakash
Basics of Engineering Drawing and Graphics
Basics of Engineering Drawing and Graphics
Jeyapoovan Thangasamy
Example to Solve for Orthographic Projections
Example to Solve for Orthographic Projections
Carnegie Mellon University
ISOMETRIC PPT
ISOMETRIC PPT
ParthSpysvit
Orthographic Projections
Orthographic Projections
Ravi Chaudhary
Engineering drawing chapter 01 introduction
Engineering drawing chapter 01 introduction
Talha Mughal
Engineering Drawing: Chapter 01 introduction
Engineering Drawing: Chapter 01 introduction
mokhtar
Technical Drawing
Technical Drawing
landichobryan082188
Lesson 1 intro to drawing
Lesson 1 intro to drawing
Priodeep Chowdhury
Engineering Drawing basics.ppt
Engineering Drawing basics.ppt
DIEMS Aurangabad
Basics of engineering drawing by Rishabh Natholia
Basics of engineering drawing by Rishabh Natholia
RISHABH NATHOLIA
Layout and Lettering
Layout and Lettering
mnafis
Unit 1-Plane Curves.pptx
Unit 1-Plane Curves.pptx
jaikrish9597
Weitere ähnliche Inhalte
Was ist angesagt?
Basic introduction to Engineering Drawing
Basic introduction to Engineering Drawing
Tariku Dessie
Engineering drawing unit 1-snist
Engineering drawing unit 1-snist
Kunduru Srinivasulu Reddy
Isometric drawings
Isometric drawings
dean dundas
Chapter 6 by lelis
Chapter 6 by lelis
LelisoHobicho
Engineering Drawing: Chapter 05 pictorial sketching
Engineering Drawing: Chapter 05 pictorial sketching
mokhtar
Working Drawings
Working Drawings
عمرو خليل
Isometric View of an Object
Isometric View of an Object
Ahmad Hassan
Introduction to Engineering and profession Ethics Lecture6-Engineering Standa...
Introduction to Engineering and profession Ethics Lecture6-Engineering Standa...
Dr. Khaled Bakro
First and third angle projection
First and third angle projection
Safiullah Khan
Engineering drawing graphics
Engineering drawing graphics
Selva Prakash
Basics of Engineering Drawing and Graphics
Basics of Engineering Drawing and Graphics
Jeyapoovan Thangasamy
Example to Solve for Orthographic Projections
Example to Solve for Orthographic Projections
Carnegie Mellon University
ISOMETRIC PPT
ISOMETRIC PPT
ParthSpysvit
Orthographic Projections
Orthographic Projections
Ravi Chaudhary
Engineering drawing chapter 01 introduction
Engineering drawing chapter 01 introduction
Talha Mughal
Engineering Drawing: Chapter 01 introduction
Engineering Drawing: Chapter 01 introduction
mokhtar
Technical Drawing
Technical Drawing
landichobryan082188
Lesson 1 intro to drawing
Lesson 1 intro to drawing
Priodeep Chowdhury
Engineering Drawing basics.ppt
Engineering Drawing basics.ppt
DIEMS Aurangabad
Basics of engineering drawing by Rishabh Natholia
Basics of engineering drawing by Rishabh Natholia
RISHABH NATHOLIA
Was ist angesagt?
(20)
Basic introduction to Engineering Drawing
Basic introduction to Engineering Drawing
Engineering drawing unit 1-snist
Engineering drawing unit 1-snist
Isometric drawings
Isometric drawings
Chapter 6 by lelis
Chapter 6 by lelis
Engineering Drawing: Chapter 05 pictorial sketching
Engineering Drawing: Chapter 05 pictorial sketching
Working Drawings
Working Drawings
Isometric View of an Object
Isometric View of an Object
Introduction to Engineering and profession Ethics Lecture6-Engineering Standa...
Introduction to Engineering and profession Ethics Lecture6-Engineering Standa...
First and third angle projection
First and third angle projection
Engineering drawing graphics
Engineering drawing graphics
Basics of Engineering Drawing and Graphics
Basics of Engineering Drawing and Graphics
Example to Solve for Orthographic Projections
Example to Solve for Orthographic Projections
ISOMETRIC PPT
ISOMETRIC PPT
Orthographic Projections
Orthographic Projections
Engineering drawing chapter 01 introduction
Engineering drawing chapter 01 introduction
Engineering Drawing: Chapter 01 introduction
Engineering Drawing: Chapter 01 introduction
Technical Drawing
Technical Drawing
Lesson 1 intro to drawing
Lesson 1 intro to drawing
Engineering Drawing basics.ppt
Engineering Drawing basics.ppt
Basics of engineering drawing by Rishabh Natholia
Basics of engineering drawing by Rishabh Natholia
Ähnlich wie Machine Drawing 0135090520 ppt02
Layout and Lettering
Layout and Lettering
mnafis
Unit 1-Plane Curves.pptx
Unit 1-Plane Curves.pptx
jaikrish9597
Class 2 presentation posted
Class 2 presentation posted
laura_gerold
CHAPTER 1. Introduction to Engineering Drawing.pptx
CHAPTER 1. Introduction to Engineering Drawing.pptx
dessietadele1
ENGINEERING GRAPHICS BRIDGE COURSE.pptx
ENGINEERING GRAPHICS BRIDGE COURSE.pptx
DHAVASHANKARAN D
Basic_Drafting_Standards_and_Symbols (1).pdf
Basic_Drafting_Standards_and_Symbols (1).pdf
Antochi1
Interior design student handbook (1)
Interior design student handbook (1)
Huu Truong Hoang
Interior design student handbook
Interior design student handbook
Anchal Garg
Architectural drafting-Ar.Archana Sreedharan
Architectural drafting-Ar.Archana Sreedharan
archsree
Eng104 engineering drawing chp 0
Eng104 engineering drawing chp 0
Nur Aishah Azriy
Engineering drawing-course-book
Engineering drawing-course-book
kishorereddy_btech
GE2221-Engineering-Graphics_Course-Materials.pptx
GE2221-Engineering-Graphics_Course-Materials.pptx
karthiksmp
Basics of drawing1.pptx
Basics of drawing1.pptx
mani251025
Classification Engineering graphics & design
Classification Engineering graphics & design
Manish Gupta
Class 3 presentation posted
Class 3 presentation posted
laura_gerold
W1-Introduction to ED [Autosaved].pptx
W1-Introduction to ED [Autosaved].pptx
karthikR778664
Chapter 01 Introduction drawing.ppt
Chapter 01 Introduction drawing.ppt
RajanBagale4
Asu history and theory lecture 5-design development 18-11-2017
Asu history and theory lecture 5-design development 18-11-2017
Galala University
Asu history and theory lecture 5-design development 18-11-2017
Asu history and theory lecture 5-design development 18-11-2017
Galala University
Engineering Drawing SBH.pptx
Engineering Drawing SBH.pptx
TechnoIndiaUniversit
Ähnlich wie Machine Drawing 0135090520 ppt02
(20)
Layout and Lettering
Layout and Lettering
Unit 1-Plane Curves.pptx
Unit 1-Plane Curves.pptx
Class 2 presentation posted
Class 2 presentation posted
CHAPTER 1. Introduction to Engineering Drawing.pptx
CHAPTER 1. Introduction to Engineering Drawing.pptx
ENGINEERING GRAPHICS BRIDGE COURSE.pptx
ENGINEERING GRAPHICS BRIDGE COURSE.pptx
Basic_Drafting_Standards_and_Symbols (1).pdf
Basic_Drafting_Standards_and_Symbols (1).pdf
Interior design student handbook (1)
Interior design student handbook (1)
Interior design student handbook
Interior design student handbook
Architectural drafting-Ar.Archana Sreedharan
Architectural drafting-Ar.Archana Sreedharan
Eng104 engineering drawing chp 0
Eng104 engineering drawing chp 0
Engineering drawing-course-book
Engineering drawing-course-book
GE2221-Engineering-Graphics_Course-Materials.pptx
GE2221-Engineering-Graphics_Course-Materials.pptx
Basics of drawing1.pptx
Basics of drawing1.pptx
Classification Engineering graphics & design
Classification Engineering graphics & design
Class 3 presentation posted
Class 3 presentation posted
W1-Introduction to ED [Autosaved].pptx
W1-Introduction to ED [Autosaved].pptx
Chapter 01 Introduction drawing.ppt
Chapter 01 Introduction drawing.ppt
Asu history and theory lecture 5-design development 18-11-2017
Asu history and theory lecture 5-design development 18-11-2017
Asu history and theory lecture 5-design development 18-11-2017
Asu history and theory lecture 5-design development 18-11-2017
Engineering Drawing SBH.pptx
Engineering Drawing SBH.pptx
Kürzlich hochgeladen
Double rodded leveling 1 pdf activity 01
Double rodded leveling 1 pdf activity 01
KreezheaRecto
BSides Seattle 2024 - Stopping Ethan Hunt From Taking Your Data.pptx
BSides Seattle 2024 - Stopping Ethan Hunt From Taking Your Data.pptx
fenichawla
VIP Call Girls Palanpur 7001035870 Whatsapp Number, 24/07 Booking
VIP Call Girls Palanpur 7001035870 Whatsapp Number, 24/07 Booking
dharasingh5698
Booking open Available Pune Call Girls Koregaon Park 6297143586 Call Hot Ind...
Booking open Available Pune Call Girls Koregaon Park 6297143586 Call Hot Ind...
Call Girls in Nagpur High Profile
Unit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdf
RagavanV2
NFPA 5000 2024 standard .
NFPA 5000 2024 standard .
DerechoLaboralIndivi
KubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghly
sanyuktamishra911
(INDIRA) Call Girl Bhosari Call Now 8617697112 Bhosari Escorts 24x7
(INDIRA) Call Girl Bhosari Call Now 8617697112 Bhosari Escorts 24x7
Call Girls in Nagpur High Profile Call Girls
data_management_and _data_science_cheat_sheet.pdf
data_management_and _data_science_cheat_sheet.pdf
JiananWang21
Generative AI or GenAI technology based PPT
Generative AI or GenAI technology based PPT
bhaskargani46
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Booking
roncy bisnoi
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...
SUHANI PANDEY
(INDIRA) Call Girl Aurangabad Call Now 8617697112 Aurangabad Escorts 24x7
(INDIRA) Call Girl Aurangabad Call Now 8617697112 Aurangabad Escorts 24x7
Call Girls in Nagpur High Profile Call Girls
Java Programming :Event Handling(Types of Events)
Java Programming :Event Handling(Types of Events)
simmis5
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Call Girls in Nagpur High Profile
Online banking management system project.pdf
Online banking management system project.pdf
Kamal Acharya
Water Industry Process Automation & Control Monthly - April 2024
Water Industry Process Automation & Control Monthly - April 2024
Water Industry Process Automation & Control
(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7
(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7
Call Girls in Nagpur High Profile Call Girls
Call for Papers - International Journal of Intelligent Systems and Applicatio...
Call for Papers - International Journal of Intelligent Systems and Applicatio...
Christo Ananth
Booking open Available Pune Call Girls Pargaon 6297143586 Call Hot Indian Gi...
Booking open Available Pune Call Girls Pargaon 6297143586 Call Hot Indian Gi...
Call Girls in Nagpur High Profile
Kürzlich hochgeladen
(20)
Double rodded leveling 1 pdf activity 01
Double rodded leveling 1 pdf activity 01
BSides Seattle 2024 - Stopping Ethan Hunt From Taking Your Data.pptx
BSides Seattle 2024 - Stopping Ethan Hunt From Taking Your Data.pptx
VIP Call Girls Palanpur 7001035870 Whatsapp Number, 24/07 Booking
VIP Call Girls Palanpur 7001035870 Whatsapp Number, 24/07 Booking
Booking open Available Pune Call Girls Koregaon Park 6297143586 Call Hot Ind...
Booking open Available Pune Call Girls Koregaon Park 6297143586 Call Hot Ind...
Unit 1 - Soil Classification and Compaction.pdf
Unit 1 - Soil Classification and Compaction.pdf
NFPA 5000 2024 standard .
NFPA 5000 2024 standard .
KubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghly
(INDIRA) Call Girl Bhosari Call Now 8617697112 Bhosari Escorts 24x7
(INDIRA) Call Girl Bhosari Call Now 8617697112 Bhosari Escorts 24x7
data_management_and _data_science_cheat_sheet.pdf
data_management_and _data_science_cheat_sheet.pdf
Generative AI or GenAI technology based PPT
Generative AI or GenAI technology based PPT
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Booking
Call Girls Walvekar Nagar Call Me 7737669865 Budget Friendly No Advance Booking
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...
VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...
(INDIRA) Call Girl Aurangabad Call Now 8617697112 Aurangabad Escorts 24x7
(INDIRA) Call Girl Aurangabad Call Now 8617697112 Aurangabad Escorts 24x7
Java Programming :Event Handling(Types of Events)
Java Programming :Event Handling(Types of Events)
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Online banking management system project.pdf
Online banking management system project.pdf
Water Industry Process Automation & Control Monthly - April 2024
Water Industry Process Automation & Control Monthly - April 2024
(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7
(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7
Call for Papers - International Journal of Intelligent Systems and Applicatio...
Call for Papers - International Journal of Intelligent Systems and Applicatio...
Booking open Available Pune Call Girls Pargaon 6297143586 Call Hot Indian Gi...
Booking open Available Pune Call Girls Pargaon 6297143586 Call Hot Indian Gi...
Machine Drawing 0135090520 ppt02
1.
C H A
P T E R T WO LAYOUTSLAYOUTS AND LETTERINGAND LETTERING
2.
2 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. OBJECTIVESOBJECTIVES 1. Identify six types of technical drawings based on the projection system they use. 2. Identify the line patterns used in technical drawings and describe how they are used. 3. Read and measure with the architects’ scale, engineers’ scale, and metric scale. 4. Identify standard drawing media and sheet sizes. 5. Add lettering to a sketch. 6. Fill in a standard title block
3.
3 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. PROJECTIONSPROJECTIONS Behind every 2D drawing of an object is a space relationship involving the object and three “imagined” things: 1. The observer’s eye, or station point 2. The plane of projection 3. The projectors (also called visual rays or lines of sight). Perspective Projection Parallel Projection
4.
4 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. Types of ProjectionsTypes of Projections There are two main types of projection: perspective and parallel. These are broken down into subtypes, as shown below:
5.
5 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. Drawing VocabularyDrawing Vocabulary • Drawing Lines • Lettering • Measurement Systems • Scale • Title Blocks A BC Title Block mm Inch
6.
6 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. ALPHABET OF LINESALPHABET OF LINES Thick and Thin Drawing Lines Freehand line technique Line styles
7.
7 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. FREEHAND LINESFREEHAND LINES The main difference between an instrument or CAD drawing and a freehand sketch is in the appearance of the lines. A good freehand line is not expected to be precisely straight or exactly uniform, as is a CAD or instrument-drawn line. Freehand lines show freedom and variety. Freehand construction lines are very light, rough lines. All other lines should be dark and clean.
8.
8 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. MEASUREMENT SYSTEMSMEASUREMENT SYSTEMS U.S. Customary Units The Metric System Dual-Dimensioned
9.
9 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. DRAWING SCALEDRAWING SCALE Drawing scale is the reduction or enlargement of the drawn object relative to the real object Reduced and Enlarged Scale. Many drawings must be shown at reduced scale for the object to fit on the paper.
10.
10 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. SPECIFYING THE SCALE ON ASPECIFYING THE SCALE ON A DRAWINGDRAWING List the predominant drawing scale in the title block. (Courtesy of Dynojet Research, Inc.) For a part that is shown on the paper at half its actual size, the scale is listed in one of these three ways: SCALE: 1:2 SCALE: 1/2 SCALE: .5 Architectural drawings list the scale based on the number of fractions of an inch on the drawing that represent one foot on the actual object. Example: SCALE: 1/8" 1'
11.
11 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. SCALESSCALES Scales are measuring tools used to quickly enlarge or reduce Drawing measurements. Types of Scales
12.
12 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. METRIC SCALESMETRIC SCALES The triangular scales have one full-size scale and five reduced-size scales, all fully divided. Using these scales, a drawing can be made full size, enlarged sized, or reduced sized. Full Size 1:1 scale Half Size 1:2 scale
13.
13 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. ENGINEERS’ SCALESENGINEERS’ SCALES An engineers’ scale (also called a civil engineers’ scales) is a decimal scale graduated in units of 1 inch divided into 10, 20, 30, 40, 50, and 60 parts. Because the engineers’ scale divides inches into decimal units, it is convenient in machine drawing to set off inch dimensions expressed in decimals.
14.
14 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. MECHANICAL ENGINEERS’ SCALESMECHANICAL ENGINEERS’ SCALES Triangular combination scales are available that include full- and half-size mechanical engineers’ scales, several architects’ scales, and an engineers’ scale all on one stick. Triangular combination scales are available that include full- and half-size mechanical engineers’ scales, several architects’ scales, and an engineers’ scale all on one stick. Mechanical engineers’ scales are divided into units representing inches to full size, half size, quarter size, or eighth size. To draw an object to a scale of half size, for example, use the mechanical engineers’ scale marked half size, which is graduated so that ever ½” represents 1". In other words, the half-size scale is simply a full-size scale compressed to half size.
15.
15 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. Architects’ ScaleArchitects’ Scale The architects’ scale is intended primarily for drawings of buildings, piping systems, and other large structures that must be drawn to a reduced scale to fit on a sheet of paper. AutoCAD software users sometimes become confused using architectural units. When selecting architectural units and entering lengths, keep in mind that a value of 1 is one inch, not one foot. AutoCAD software users sometimes become confused using architectural units. When selecting architectural units and entering lengths, keep in mind that a value of 1 is one inch, not one foot.
16.
16 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. LETTERINGLETTERING Lettered text is often necessary to completely describe an object or to provide detailed specifications. Lettering should be legible, be easy to create, and use styles acceptable for traditional drawing and CAD drawing. Engineering drawings use single-stroke sans serif letters because they are highly legible and quick to draw. Sans serif means without serifs, or spurs Sans serif means without serifs, or spurs
17.
17 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. LETTERING STANDARDSLETTERING STANDARDS An Example of Lettering and Titles Using CAD • Most hand-drawn notes use lettering about 3 mm (1/8") high. • CAD notes are set using the keyboard and sized to be in the range of 3 mm (1/8") tall according to the plotted size of the drawing. • CAD drawings typically use a Gothic lettering style but often use a Roman style for titles.When adding lettering to a CAD drawing, a good rule of thumb is not to use more than two fonts within the same drawing. When adding lettering to a CAD drawing, a good rule of thumb is not to use more than two fonts within the same drawing.
18.
18 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. VerticalVertical CapitalCapital Letters andLetters and NumeralsNumerals The proportions of vertical capital letters and numbers are shown
19.
19 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. Vertical Lowercase LettersVertical Lowercase Letters When large and small capitals are combined, the small capitals should be three fifths to two thirds the height of the large capitals. When large and small capitals are combined, the small capitals should be three fifths to two thirds the height of the large capitals. Lowercase letters are rarely used in engineering sketches except for lettering large volumes of notes. Vertical lowercase letters are used on map drawings, but very seldom on machine drawings.
20.
20 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. InclinedInclined CapitalCapital Letters andLetters and NumeralsNumerals Inclined (italic) capital letters and numerals, are similar to vertical characters, except for the slope. The slope of the letters is about 68° from the horizontal.
21.
21 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. FRACTIONSFRACTIONS Do’s & Don’t • Never let numerals touch the fraction bar. • Center the denominator under the numerator. • Avoid using an inclined fraction bar, except when lettering in a narrow space, as in a parts list. • Make the fraction bar slightly longer than the widest part of the fraction.
22.
22 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. USING GUIDELINESUSING GUIDELINES Use extremely light horizontal guidelines to keep letter height uniform… Do not use vertical guidelines to space the distance from one letter to the next within a word or sentence. Do not use vertical guidelines to space the distance from one letter to the next within a word or sentence. For even freehand letters: • Use 1/8" gridded paper for drawing to make lettering easy. • Use a scale and set off a series of spaces, making both the letters and the spaces between lines of letters 1/8" high. • Use a guideline template like the Berol Rapidesign 925 • For whole numbers and fractions, draw five equally spaced guidelines.
23.
23 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. SPACING OF LETTERS AND WORDSSPACING OF LETTERS AND WORDS Spacing between Words Space letters closely within words to make each word a compact unit, but space words well enough apart to clearly separate them from adjacent words. Spacing between Rows Be sure to leave space between rows of lettering, usually equal to the letter height. Spacing between Letters Uniform spacing between letters is done by eye. Contrary to what might seem logical, putting equal distances from letter to letter causes them to appear unequally spaced.
24.
24 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. LETTERING FOR TITLESLETTERING FOR TITLES In most cases, the title and related information are lettered in title boxes or title strips When lettering by hand, arrange the title symmetrically about an imaginary centerline
25.
25 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. DRAWING PENCILSDRAWING PENCILS High-quality drawing pencils help produce good quality technical sketches and drawings. Hard The hard leads in this group (left) are used where extreme accuracy is required, as on graphical computations and charts and diagrams. The softer leads in this group (right) are sometimes used for line work on engineering drawings, but their use is limited because the lines are apt to be too light. Medium These grades are for general-purpose work in technical drawing. The softer grades (right) are used for technical sketching, lettering, arrowheads, and other freehand work on mechanical drawings. The harder leads (left) are used for line work on machine drawings and architectural drawings. The H and 2H leads are widely used on pencil tracings for reproduction. Soft These leads are too soft to be useful in mechanical drafting. They tend to produce smudged, rough lines that are hard to erase, and the lead must be sharpened continually. These grades are used for artwork of various kinds, and for full-size details in architectural drawing.
26.
26 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. Style of PencilStyle of Pencil You might be surprised how much your drawings benefit from finding a style of pencil that suits your use. Soft pencils, such as HB or F, are mainly used in freehand sketching. Choose a pencil that: • Is soft enough to produce clear black lines, but hard enough not to smudge too easily. • Is not so soft that the point breaks easily. • Feels comfortable in your hand. • Grips the lead without slipping.
27.
27 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. THE COMPUTERTHE COMPUTER AS A DRAFTING TOOLAS A DRAFTING TOOL Most people who create technical drawings use CAD. The advantages include accuracy, speed, and the ability to present spatial and visual information in a variety of ways. Even the most skilled CAD users need to also be skilled in freehand sketching, to quickly get ideas down on paper. Even the most skilled CAD users need to also be skilled in freehand sketching, to quickly get ideas down on paper. One benefit of CAD is the ability to draw perfectly straight uniform lines and other geometric elements. Making changes to a CAD drawing takes about a tenth the time that it takes to edit a drawing by hand.
28.
28 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. SKETCHING AND DRAWING MEDIASKETCHING AND DRAWING MEDIA Many choices of media (paper and other) are available for particular sketching or drawing purposes. Whether you are sketching or are plotting a drawing from a CAD workstation, choose the type of sheet and size that suits your needs. Small notebooks or sketch pads are useful when working at a site or when it is necessary to quickly record information. Sketch on Graph Paper Graph paper can be helpful in making neat sketches
29.
29 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. STANDARD SHEETSSTANDARD SHEETS There are ANSI/ASME standards for international and U.S. sheet sizes. Note that drawing sheet size is given as height width. Most standard sheets use what is called a “landscape” orientation. * May also be used as a vertical sheet size at 11" tall by 8.5" wide.
30.
30 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. Typical Sheet Sizes and BordersTypical Sheet Sizes and Borders • Margins and Borders • Zones
31.
31 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. Title BlockTitle Block The title block is located in the lower right corner of the format. Standard areas in the title block provide the information as shown below.
32.
32 Technical Drawing with
Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman © 2012, 2009, 2003, Pearson Higher Education, Upper Saddle River, NJ 07458. • All Rights Reserved. PLANNING YOUR DRAWING ORPLANNING YOUR DRAWING OR SKETCHSKETCH When laying out a drawing sheet, you will need to consider: • the size and scale of the object you will show • the sheet size • the measurement system (units) for the drawing • the space necessary for standard notes and title block.The object you are drawing is the “star” of the sketch. Keep the object near the center of the sheet. It should be boldly drawn, using thick visible lines. Make it large enough to fill most of the sheet and so that details show clearly
Jetzt herunterladen