In 2008 there were over 2 million visits to emergency rooms due to injuries caused by “cutting or piercing instruments or objects”. 18% of these injuries were to the upper extremities – hand, finger, wrist, and arm.
This presentation helps you find the right solution and identifies the major role PPE plays, so you can "cut" costs and keep your workers safe.
Cardiac Output, Venous Return, and Their Regulation
Laceration Cessation
1. The Best Value in Industrial Solutions since 1946
Laceration Cessation
2. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Matt Block
• Director of Health & Safety Services
• 23 Years Industrial Health & Safety Experience
• Member of ISEA Hand Protection Committee
• Member of ASTM Committee F18 on Electrical Protective Equipment
3. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Laceration Topics
• Understanding
“Cut” Costs
• Preventing injuries
and their associated
costs
• The role of PPE
• Finding the right
solution
5. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Statistics
• Centers for Disease Control (CDC)
– In 2008 there were over 2 million visits to emergency rooms due to
injuries caused by “cutting or piercing instruments or objects”
– 18% of these injuries were to the upper extremities –
hand, finger, wrist, and arm
• OSHA
– Injuries to fingers and hands ranked highest in
workplace accidents - more than 27%.
– Hand and finger accidents ranked highest in preventable injuries.
• Bureau of Labor Statistics
– Lacerations of the fingers and hand combined are second only to back
strain and sprain in the number of days-away-from-work cases
6. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
What are the costs?
• National Safety Council
– Average total incurred cost per
workers’ compensation
claim for hand, finger, and wrist
injuries (2008-2009):
$19,180.00
• OSHA “$afety Pays” Laceration Injury
– Direct Cost - $17,368
Indirect Cost - $19,104
Total Cost - $36,472
7. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Where are the Costs?
• O.S.H.A. fines
• Legal costs
• Loss of key employee affecting operational efficiency
• Accident investigation time
• Downtime
• Lost productivity: co-workers assisting, spectator
• Use of equipment (clean-up, repair, rentals required)
• First aid
• Overtime costs (wages, utilities and other fixed costs of operation)
• Reduced efficiency / morale impacts
• Schedule delays
• Insurance costs impact (modifier changes – EMR)
• Loss of insurance bidding opportunity (EMR too High)
8. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Where are the Costs? (Cont.)
• Opportunity costs (missed jobs)
• Inefficiency of replacement personnel
• Equipment damage
• Claim administration
• Inefficiency of returning injured worker (short or long term)
• Public perception / image: Impacts to business, employee recruitment
• Damaged product / raw materials – re-work
• Corrective action implementation cost
• Training for response (internal, on-going cost)
• Hiring costs: interviewing, medical/drug screening.
9. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Bottom Line Impact
• Do the math...
– 5 injuries every year
– Potential Cost:
5 injuries @ $19,180.00 per incident
= $95,900.00
These costs can be avoided….
11. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Risk Assessment
• Analyze History
– Identify root causes of employee injuries
• Engineering or administrative
• PPE failure • Safety culture
• Interview Employees
– Understand challenges
– Evaluate current PPE
• Observe Process
• Quantify Risk
– What is the potential for injury?
– Identify all contributing factors
12. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Process Improvements
• Administrative Controls
– Can we reduce the number of
“touches”?
– Are we maintaining equipment
to ensure sharp edges on parts
are reduced or eliminated?
• Engineering Controls
– Can we reduce or eliminate the
hazard through tool changes?
– Can we change raw material
packaging to reduce the need
for cutting tools?
13. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
For example, what to look for
when choosing a Safety Knife…
• Auto-Retractable Blade
• Spring Loaded Blade
• Concealed Blade
• Blunt tip or hook blade
• Ergonomic features
• Ease of use
• Blade quality
• Training
14. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Preventing Injuries with PPE
• The best PPE is the PPE your
employees will wear
– Glove use has been shown to
reduce the risk of an acute
occupational hand injury by 60%
– Over 72% of injured workers
reported not wearing gloves at
the time of the injury
16. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Selecting a Glove
• Understanding cut resistance
• Material Selection
– Yarn
– Coatings
• Determine the level of dexterity required
17. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Evaluating Cut Resistance
ANSI/ISEA 105 Classification for Cut Resistance
Gram score defines the cut level
Less than 200g Level 0
200g - 499g Level 1
500g - 999g Level 2
1000g – 1499g Level 3
1500g – 3499g Level 4
3500g + Level 5
18. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
How are ANSI 105 Cut Levels Determined?
Cut Protection Performance Test
ASTM F1790-97
26. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Para-Aramid Yarns
• Brand Names – Kevlar® & Twaron®
• Flame resistant
• May be blended with stainless steel or glass for greater cut resistance
27. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
High Performance Polyethylene (HPPE) Yarns
• Brand Names – Spectra® & Dyneema®
• Excellent abrasion resistance
• Good weight to cut ratio
• May be blended with stainless steel or glass for greater cut resistance
• Low lint properties
• FDA compliant
28. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Composite Yarns
• Magid Brands – Aramax®, Aramax® XT, and XKS
• Engineered to meet specific performance criteria
– Form fitting with high cut resistance
– Abrasion resistance
– Moisture wicking
29. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Para-
aramid
HPPE
Composite
Yarns
Weight/Cut
Ratio
Abrasion
Resistance
Heat / Flame
Resistance
Grip
Lint
Food
Compliance
MaterialComparison
32. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Polyurethane
• Provides positive grip on wet or oily surfaces
• Excellent for precise and delicate operations
• Good abrasion resistance
• Porous nature makes it a poor choice where there is heavy liquid
exposure
33. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Sandy Nitrile / NitriX™ Grip Technology
• Offers excellent barrier against liquids such as oils and coolants
• Excellent oil and wet grip
• Abrasion resistant
• Generally heavier than PU coatings, providing better protection from
metal shavings
35. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Flat Dipped Nitrile
• Offers excellent barrier against liquids such as oils and coolants but
with poor wet grip.
• Abrasion resistant
• Generally heavier than PU coatings, providing better protection from
metal shavings
36. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Natural Rubber Latex
• Excellent dry grip
• Abrasion resistant
• Should not be used for applications involving hydrocarbon based
liquids/oils
• Latex allergies
38. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Determining the Level of Dexterity
Examples of Cut Level 2 Gloves
$3.14 / Pair$.87 / Pair
$6.33 / Pair $7.70 / Pair
40. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Metal Stamping and Fabrication
• Common Risks & Concerns
– High cut/laceration potential
– Oil/coolant exposure
– Loss of grip caused by glove saturation,
increasing potential for cut/laceration injuries
• Potential Solutions
– Composite yarn with sandy nitrile / NitriX
coating – Magid XKS500 or GPD505
– Composite yarn with leather palm – Magid
XKS200LEA
– Composite yarn terrycloth - Magid AX450
41. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Machining
• Common Risks & Concerns
– Cut/laceration from sharp edges
– Metal shavings and chips
– Heavy coolant exposure
• Potential Solutions
– Glove use should be avoided where they might become
entangled in moving machine parts
– Composite yarn glove with full nitrile or sandy nitrile
coating Magid 1591ORKV
– HPPE glove with full nitrile coating and sandy nitrile palm
– Cut and puncture resistant glove with full nitrile coating –
HexArmor 7090
42. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Assembly
• Common Risks & Concerns
– Cut/laceration from sharp edges
– Good grip and dexterity required for
handling smaller parts
• Potential Solutions
– HPPE Glove with Polyurethane
Palm Coating – Magid CT500,
GPD546 or GPD590
– Kevlar and Lycra Blended Gloves
with Polyurethane Palm Coating –
Magid KEV4326 or KEV4327
43. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Cut Resistant Gloves for Extreme Hazards
• HexArmor® Gloves
– Ideal for applications requiring cut and
puncture resistance
– Performance is enhanced through the
configuration of tiny guard plates making them
effective for even the most extreme hazards
• Metal Mesh Gloves
– Ultimate cut resistance
– Manufactured from either stainless steel or
titanium, mesh is durable, corrosion proof and
will withstand the harshest environments
44. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
Increase Compliance & Awareness
• Incorporate cut resistance into
every day clothing solutions such
as Magid ORG900PT
• High visibility glove solutions to
increase employee awareness
• Employee Training
45. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
In closing
• Eliminating Cut and Laceration Injuries
– Evaluate the risk
– Understand the challenges
– Eliminate the hazard through
engineering or administrative controls
– Select PPE offering performance
characteristics that best match the
requirements of the task
46. Laceration Cessation
Seminar
The Best Value In Safety Solutions Since 1946
QUESTIONS?
Matt Block
Director of Health & Safety Services
Phone: (773) 289-1365
Cell Phone: (630) 235-6100
Email: MattBlock@MagidGlove.com