EXPERT GUIDANCE IN POWER SYSTEMS POWER ELECTRONICS We provide guidance and codes for the for the following power systems areas. Deregulated Systems, Wind power Generation and Grid connection Unit commitment Economic Dispatch using AI methods Voltage stability FLC Control Transformer Fault Identifications SCADA - Power system Automation We provide guidance and codes for the for the following power Electronics areas. 1. Three phase inverter and converters 2. Buck Boost Converter 3. Matrix Converter 4. Inverter and converter topologies 5. Fuzzy based control of Electric Drives. 6. Optimal design of Electrical Machines 7. BLDC and SR motor Drives

1. This document contains text automatically extracted from a PDF or image file. Formatting may have
been lost and not all text may have been recognized.
To remove this note, right-click and select "Delete table".

2. EXPERTSYSTEMSANDSOLUTIONS

3. 48, North Street, Aranarai, Perambalur, Tamil Nadu, India.
Email ID: expertsyssol@yahoo.com,
Website: www.researchprojects.info
Phone: 9952749533,
MICRO CONTROLLER BASED OBJECT TRACKING SYSTEM
ABSTRACT
Micro controllers have found various applications in the present scenario and
are used in most of the electronics based equipments. They have become a user
friendly component and their programming part is being made easy through the
wide spread knowledge about them. We have used up the additional advantages of
the micro controller over the micro processor in our project. Our project
microcontroller based object tracking system is to identify the location of an object in
an institution with a huge campus area. Whenever we take up the case of an
institution with a huge campus area, it gets hard to find the location of an object we
are searching for. Especially when the object we are looking for is moving, we need to
keep track of the object's movement to find it. Our project gives an effective solution
to this problem. The basic idea of our project is to set up receivers at various
locations and hand down transmitters to each object. This entire process of
generating a unique code, transmitting it, receiving it and decoding it can be achieved
by categorizing the project into three modules namely the Transmitter section, the
Receiver section and the Central module consisting of the Micro controller. The basic
operating principle of the project can be implemented using these sections.