Presenting Pureit Copper+ Eco, an advanced water saver purifier that enhances your family’s health by bringing together modern technology and traditional goodness. It’s 7 stage RO+UV+MF purification process purifies water and its unique proprietary Copper Charge Technology charges it with goodness of copper.

1. I
N
S
T
R
U
C
T
I
O
N
M
A
N
U
A
L
Welcome
to the Pureit family
Welcome
to the Pureit family

2. 1
KNOW YOUR PUREIT
COPPER+ ECO MINERAL RO+UV+MF
01. LED Display Panel
02. Touch buttons – Copper Enriched
Water & Ambient RO Water
03. Water Dispensing Outlet
04. Pre-sediment Filter
05. Inlet Water Tube
06. Reject Water Tube
07. Diverter
08. Ball Valve
09. Drip Tray
10. Manual Dispense Tap
6
1
2
3
4
10
9
5
8
7

3. 2
UNIQUE FEATURES
*For all water contact parts. **Advance Alert System will alert you 15 days before or 15 hours before completion of every 260 hours of pump running time(Which gives Approximately 6000liters of purified water). The purifier will
communicate the alert only if the purifier is in a switched on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut off™ of water will be activated automatically only for GKK, even if the
purifier is in a switched of condition. ***Under test condition, Input TDS – 750 ppm, Turbidity – <1 NTU, Input Pressure – 10 psi, Input Hardness – 300 ppm, Temp. – Room temp. ~Copper Charge Technology is a unique proprietary
technology which is based on electrochemical dissolution of copper in water. #
Smart technology which ensures precise dosing in every glass of water. Consumption of 2 litres of copper charged RO water every day, will add upto
approximately 30% of the RDA for copper( for adults, as guided by the Indian Council of Medical Resarch, ICMR) ^
7.6 to 8 litres in running water conditions.
This is a graphic representation of filters
1 2 3 4 5 6 7
1. Pre-Sediment Filter (SF)
Removes fine and coarse particulate impurities/dirt and improves life of the Carbon Filter.
2. Pre-RO Carbon Filter
Removes chlorine and organic impurities such as harmful pesticides. It also absorbs bad taste
and odor-causing organic compounds from water.
3. Mesh Filter
Filters water further to ensure removal of finer particulate impurities.
4. RO Membrane
Removes dissolved salts, hardness, pesticides and heavy metals like arsenic, lead and
mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts.
5. UV Chamber
Acts as an additional stage of purification to further inactivate bacteria, virus and parasites to
deliver safe water.
6. Post RO Carbon Filter
This level of purification acts as a polisher and enhances the taste of purified water.
7. Micro Filtration Membrane
Micro Filtration Membrane is stage after Post-RO and UV, which ensures that the water is
purified not once but thrice.
UNIQUE TECHNOLOGY
An advanced purifier that brings together modern technology and traditional goodness to
enhance your family’s health. It's advanced 7 stage purification process with RO+UV+MFpurifies
water and its proprietary Copper Charge TechnologyTM~
charges it with goodness of copper.
COPPER CHARGE TECHNOLOGYTM~
A unique modern technology that charges water with 99.8% pure copper,
in real time.
DUAL WATER DISPENSING
Two buttons gives you the choice of RO water and copper charged RO water.
INTELLIGENT COPPER CLEANING MODE
Smartly senses and schedules copper auto-cleaning, for fresh copper infusion
at all times.
PRECISE COPPER DOSING#
Infuses right amount of copper in every glass of water.
ADVANCED 7 STAGE PURIFICATION WITH RO+UV+MF
That ensures 100% RO purified water.
DOUBLE PURITY LOCK
Digital Advance Alert System, alerts you 15 days** before life of the Germkill
Kit gets over and Auto Shut off stops water if filter is not changed, providing
100% gurantee of safe and sweet water.
LARGE STORAGE CAPACITY
Upto 8 litres^
storage capacity of purified water so that you never run out of
RO water.
ECO RECOVERY™ TECHNOLOGY
Delivers efficient purification to give a high water recovery rate of up to 60%.
100 % FOOD GRADE PLASTIC*
Prevents harmful toxins from leaching into water.
UNITED STATES ENVIRONMENT PROTECTION AGENCY (USEPA)
COMPLIANT
Meets the toughest safety standards by removing 1 crore virus and 10 crore
bacteria from 1litre water.

4. 3
INSTALLING YOUR PUREIT
COPPER+ ECO MINERAL RO+UV+MF
CLEANING AND MAINTENANCE
TAKING CARE OF PUREIT
COPPER+ ECO MINERAL RO+UV+MF
1. Use only the plug provided with the purifier
2. The purifier should not be connected to any hot water tap. Do not run hot water over
45°C through the purifier
3. Make sure that the power is kept on to dispense the water. Press the Touch button to
dispense water from the storage tank.
4. Water from waste water tube is not suitable for drinking. You can use that water for
gardening or cleaning floors.
5. Store water only in the purifier and don't use bottles and containers. If you do so,
water may get contaminated.
RECOMMENDATIONS/CAUTIONS:
1. Discard first glass of RO water when dispensed immediately after dispensing Copper
RO water, to avoid any traces of Copper in RO water.
2. Doctor's advice is recommended for Consumption of more than 30% RDA equivalent
Copper RO water in adults.
3. Elders kindly moderate consumption of Copper RO water for children.
4. Stop using the Copper RO water if you feel any change in taste / discomfort & call
Pureit call centre to inspect the device.
5. Consult your doctor, if you are sensitive to copper water.
1. The purifier should be installed by a trained Pureit technician
2. It can be wall-mounted or used as a table top purifier
3. The purifier should be placed in area which is free of ants/insects/other pests.
4. The purifier should be placed close to the plumbed inlet connection
(not more than 2 metres).
5. Do not install the purifier above any electric socket
6. Avoid sharp bends to the pipes of the product
7. Do not use an extension cord
8. Make sure you test the input water TDS (Total dissolved salts) before installing the
purifier. The maximum input TDS should not exceed 2000 PPM.
Water Dispensing
Point
1. Do not use detergents, soap or wet cloth to clean the external parts. Use dry and soft
cloth to clean the front cover. It is recommended to use a 3M mop cloth for cleaning.
2. Clean the dispenser by using disinfectants like bleach/hypochlorite (50 PPM available
chlorine). Discard 2 litres of water after cleaning the dispenser.
3. Discard water from detachable tray & maintain in dry condition.
Storage Tank
1. Discard the water in the storage tank once in 15 days.
2. Drain the water in the storage tank if purifier is not used for 2 days.
3. Clean the storage tank once a month with disinfectant solution. To purchase this
solution, call us at 1860-210-1000 now.
4. How to clean the tank: Open the cleaning solution dispenser and put 1 ml of the
disinfectant solution (10–15 drops) into the storage tank. (Ensure the tank is full).
Drain the entire tank after 10 minutes.
5. No foreign material (like dust/ants/insects/other pests) should enter the storage tank.
The filtered water in the storage tank may deteriorate in the process.
6. The point-of-use reverse osmosis drinking water treatment systems addressed by NSF-58
standard are designed to be used for the reduction of specific substances that may be
present in drinking water supplies (public or private) which are considered to be
microbiologically safe and are of known quality.
7. The output water may continue to have flora which are harmless and pose no health
hazard to normal healthy adults and children.
Disposal Guidelines (Electrical): To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate electrical items in this product such as power supply adaptor, control circuits, LED panel, and
wiring from other types of waste and recycle them responsibly to promote sustainable use of material resources.
Contact either the retailer where you purchased this product, or local government office for details of where and
how these items can be taken for environmentally safe recycling.

5. KEEP YOURSELF SAFE CLEANING AND MAINTENANCE
1. Do not open the purifier for cleaning or for any replacements. This can be done only by a
qualified company personnel or an authorized agent.
2. Do not plug or unplug the power cord with wet hands to avoid any untoward accident
due to electrical shock or fire.
3. Do not splash the filtration system with water while cleaning.
4. Do not put heavy or sharp objects on the purifier.
5. Never put the cord near stoves or heaters.
6. If the power cord is damaged, it must be replaced and not used again.
7. Always switch-off the“Ball Valve”and electrical power in case you notice any leakage
from the purifier or you are going out of home for more than 2 days.
8. Ensure input pressure is more than 10 PSI and less than 30 PSI ***
9. In case UV lamp breaks, carefully sweep all the fragments, wipe the area with a wet towel,
and dispose all the fragments including the used towel in a sealed plastic bag. Open
windows to allow room to ventilate. Do not use vacuum cleaner. Hand over the bag to
the service technician for proper disposal of the same when he visits to replace UV lamp.
10. In case of any smoke or burning smell, switch-off power, remove the plug immediately
and call us at 1860-210-1000.
•
P
U
R
E
I
T
C
U
STOMER
C
A
R
E
N
O
•
*** If it is more than 30 PSI, you need to use‘Pressure reducing Valve’which must be bought at an additional cost. If the
pressure is less than 10 PSI then you need to buy‘Pressure enhancing Pump’which can be bought at an additional cost.
Ensure you buy them from the authorized service personnel of Pureit.
ATTENTION
• Close the ball valve before opening SF housing for cleaning.
• Please do not use any abrasive / pointed tool to clean the Sediment
Filter as it may damage the Sediment Filter.
• In case you observe the rubber ring is dirty, clean the rubber ring &
fix it on the housing again properly.
• Clean the inner portion of the housing as well.
• If required, a Spanner for opening ESF housing can be bought from
Pureit service technician. 4
SF (Sediment Filter)
STEP 1 :
Close the ball valve
before opening ESF
housing for cleaning
STEP 5 :
Clean the Sediment Filter
under jet of water,
rub by hand / tap gently
to clean
STEP 6 :
After cleaning the Filter,
put it back in the housing
and then put the grey
coloured Carbon Sleeve
back into the housing
STEP 8 :
Connect the water
inlet tube to the housing
STEP 2 :
Remove the water
inlet tube which is
attached to the housing
STEP 3 :
Rotate the housing
clock-wise and remove it
completely from the cap
STEP 4 :
Take out the grey
coloured Carbon Sleeve
and the Sediment Filter
from the housing
STEP 7 :
Insert the housing inside
the cap and rotate it
anticlockwise to engage
the threads Ensure the
housing is tightened till
it’s original marking

6. 5
TECHNICAL SPECIFICATIONS
^While the Germkill Kit and the Sediment Filter have a fixed replacement schedule, you might be required to clean/change the SF in
the interim depending on the quality of your input water. If the External Sediment Filter is not replaced/cleaned in time (when the blue
blinking happens), it may affect the performance of the purifier. Blinking for sediment filter will occur to clean/replace sediment filter
after approximately 132 hours of pump running time. You can either clean SF or call Pureit helpline to replace filters at a nominal cost.
* Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS,
pressure and life of Filter elements.
*** Input water quality and TDS content are important determinants of output water quality.
**** If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the pressure
is lesser than 10 PSI then you need to buy‘Pressure enhancing pump’at an additional cost. Device should not be installed in a house
where input pressure is greater than 60 psi.
###
After every 275 hours of pump running time the Germkill Kit needs to be
changed. Every 275 hours of pump running time typically gives 6000 liters of purified water under test conditions of 10 PSI input
pressure, 750 ppm TDS and 25 °C temperature. Any variations from the test conditions will lead to variations in the filtered life.
Pureit Copper+ Mineral RO+UV+MF
Height ~447 mm
Width ~350 mm
Depth ~361 mm
Weight ~9.5 kg
Flow rate* Up to 24 litres per hour
Storage tank capacity Upto 8 litres$
7 -Stage Purifying Technology
Membrane type
Pump type Diaphragm pump, 24V dc
% Recovery* Typically 60%
TDS reduction*** 90% (min)
Input water pH range pH range 6.5-8.5, Temperature range 10°C- 40°C
Power rating 60 Watts
Pressure rating 10-30 PSI****
Rated Voltage 100-240V.a.c 50/60 Hz (100-300V.a.c 50/60 Hz)
Material of construction for plastic parts Food safe, non-toxic, engineering grade plastics
Length of Power Cord 1.5 metres
Total Dissolved Solids Upto 2000 mg/lit>
Total hardness 500 mg/lit (max.)
Iron 0.3 mg/lit (max.)>>
Turbidity 1NTU (max.)
Germkill Kit™
Material of construction Food safe, non-toxic, engineering-grade plastics
Copper Germkill Kit™ Copper Module with Harness – 1 Nos
Germkill Kit™
Pre-Sediment Filter – 1 No. Pre-RO Carbon Filter – 1 No.
Mesh Filter – 1 No. Post-RO Carbon Filter – 1 No.
TDS Modulator – 1 No. MF Membrane – 1 No.
RO Membrane – 1 No.
PP Melt Blown Pre-Sediment Filter, Pre-RO Carbon Filter,
Mesh Filter, Reverse Osmosis Membrane, UV Reactor,
Post-RO Carbon Filter and Micro Filter Membrane
####
Every 78 hours of Cu Valve running time typically gives 8000 liters of copper enriched water under ideal condition (10 PSI input
pressure, 750 ppm TDS and 25°C temperature).
#
Technical specifications are subject to change or improvement without prior notice.
> In case the TDS is >1000 PPM, a company provided anti-scalant is recommended to be installed. This has to be purchased at extra
cost.
>>If the iron content in the input water is more, it is recommended to install a company provided iron filter at an additional cost.
$
7.6 to 8 litres in running water conditions.
LED INDICATOR GUIDE
Germkill performance standard Meets stringent international criteria for
microbiologically safe drinking water – e.g.,
Environmental Protection Agency (EPA), USA
3. COPPER CHANGE
SOLID GREEN
Copper is safe to use
RED BLINKING
Advance alert to change Copper
After every 77Hours and 50 minutes of Copper
DSV running time post device installation or
Copper replacement.
RED SOLID
Auto-shut off, replace Copper GKK
After every 78 hours####
of Copper DSV running
time, post device installation or Copper GKK
replacement.
RED, BLUE, GREEN
BLINKING IN SEQUENCE
Electric Fault
4. COPPER RO WATER
YELLOW SOLID
Copper RO water is dispensing
YELLOW BLINKING
Auto-Cleaning Mode,
water cannot be dispensed
RED SOLID
Fault, water cannot be dispensed
5. RO WATER
BLUE SOLID
RO water is dispensing
RED SOLID
Fault, water cannot be dispensed
1. TANK FULL
SOLID GREEN
Tank full
SOLID RED
Low / No input water
2. SF / GKK CHANGE
SOLID GREEN
SF / GKK is safe to use
BLUE BLINKING
Replace / clean SF^
RED BLINKING
Advance alert to replace GKK
After every 260 hours of pump running
time, post device installation or GKK
replacement.
RED SOLID
Auto-shut off, replace GKK
After every 275 hours###
of pump
running time, post-device installation
or GKK replacement.

7. 6
FAQs
Pureit Helpline
1860-210-1000
www.pureitwater.com
HowdoesPureitCopper+EcoMineralRO+UV+MF
work?
Pureit Copper+ Eco Mineral RO+UV+MF has a 7
stage purification system that ensures you get
'Safer than boiled waterTM
'. It also removes excess
total dissolved salts (TDS) to make the water
tastier.
What is the storage capacity of Pureit Copper+
Eco Mineral RO+UV+MF?
Pureit Copper+ Eco Mineral RO+UV+MF has a
storage tank capacity of upto 8 Litres under
running water. The process of filling the storage
tank is fully automatic. When you take water out of
the tank the purification process automatically
refills the storage tank.
How much time it takes to purify water in Pureit
Copper+ Eco Mineral RO+UV+MF?
Pureit Copper+ Eco Mineral RO+UV+MF can purify
water upto 24 litres per hour. However, the time
taken to purify is influenced by life of the filters,
the input water pressure, and other impurities
present in water.
How will I get new Consumables/Membranes and
Copper module replaced?
You need to call the Pureit Helpline and order for a
Germkill Kit™. A technician will visit your place to
replace it, at a nominal cost.
Can I drink the first purification cycle of water
from the purifier?
After Pureit Copper+ Eco Mineral RO+UV+MF is
installed or whenever the Germkill Kit™ (s) are
replaced, discard the first cycle of water (8 litres)
that is filled in the storage tank.
What should I do if there is no water being
dispensed from the spout?
In case you cannot dispense water from the spout,
first check whether the power supply is on. If it is
on, then check if there are any fault indicators on,
or " SF/GKK”indicator is blinking. Get either the
fault resolved or Germkill Kit™ replaced. If none of
these indicators are lit up on the indicator panel,
then check if the ball valve is closed. If none of
these cases are true, then please call Pureit
helpline for assistance.
Can I open and service my purifier?
It is not recommended to open and service the
device yourself. Call the Pureit helpline if you face
any issue which requires servicing and opening
the device.
Can I use any type of water to purify through my
Pureit Copper+ Eco Mineral RO+UV+MF?
Pureit Copper+ Eco Mineral RO+UV+MF will purify
“potable”water for removal of hardness and other
impurities to give you safe drinking water. If the
input water has impurities normally not present in
drinking water (high iron/ turbidity/ microbial
contamination etc.) or water is from unknown
source (river/lake/pond/borewell etc.) then
suitable pre-treatment may be required.
The Advance Alert System™ did not give me 15
days warning before the purifier stopped
working. Why is it so?
There may be several reasons for this: While the
Germkill Kits and the Pre-Sediment Filter have a
pre-determined life, depending on your input
water quality the Pre-Sediment Filter might need a
replacement/cleaning even before the purifier
gives you an alert. In such cases, please contact
Pureit helpline and get the Pre-Sediment Filter
replaced/cleaned. The purifier will communicate
the alert only if the purifier is in a switched on
condition during the scheduled alert time. Post the
completion of the scheduled alert time, Auto Shut
off™ of water will be activated automatically for
GKK.
Does Pureit Copper+ Eco Mineral RO+UV+MF
remove arsenic, fluoride and nitrates?
Yes. RO technology can remove arsenic, fluoride
and nitrates.
Can I use the reject water?
It is not recommended to use rejected water for
any kind of consumption (drinking or cooking). It
can probably be used for gardening or floor
cleaning.
What should I do if any part of the purifier is
broken?
Please call Pureit helpline to guide you on any
repairs required. You might need to buy the
replacement parts at an additional cost.
What should I do if there is a leakage from the
purifier?
Turn off the ball valve and switch off the power, if
you find any failure. Check for any visually
improper fitment and then call Pureit helpline and
register a service request.
How long the stored water in Pureit Copper+ Eco
Mineral RO+UV+MF can be used for drinking?
It is recommended for the stored water to be
consumed within 2 days. Water stored for over 2
days should ideally be discarded.
How do I know when I have to change my
Germkill Kit™?
Pureit Copper+ Eco Mineral RO+UV+MF has an
indicator panel with SF/GKK indicator that will
blink to prompt you to call the Pureit helpline to
get the respective GKK changed, whenever the life
of the Germkill Kit™ is near expiry (refer to
"Understanding LED indicator panel" section of
this user manual for further details).
Can the Pre-Sediment Filter or the other filter
parts choke before the Advance Alert ?
While the Germkill Kit™ and the Pre-Sediment Filter
have a pre determined life, you might be required
to change the filters in the interim depending on
the quality of your input water. Should the tap flow
rate be very low or if it is taking too long for the
tank to fill, then please contact the Pureit helpline
to change the membranes. These extra visits will
be chargeable as per T&C.
For how long can I continuously dispense water?
Once the Soft-Touch button is pressed water
dispenses for 3 minutes ( 2 minutes if in Warning/
ASO/Fault condition) and it automatically stops
dispensing after that. In case you need more water,
you need to press the button again. You can stop
the flow of water in between by pressing the
Soft-Touch button again.
Will the Guided Alert System indicate any
leakage complaints?
No. It only indicates key electrical faults.
How can I clean my Pureit Copper+ Eco Mineral
RO+UV+MF?
To clean the device body clean dry or wet wiping
with 3M foam mop/cloth is recommended. Do not
spray water on the device front cover as it may
damage the electronic part. Do not use soap or
hard cleaning detergents.
What should I do if the water from the purifier
tastes unusual or the purification is taking more
time?
Please call the Pureit helpline. A technician will visit
you to help resolve the issue.
What should I do if the copper charged RO water
is not dispensing?
Please check if the Copper RO Water LED is
blinking yellow, if yes then please do wait as device
is in Copper Auto-Cleaning Mode. Once the
auto-cleaning process is complete you can
dispense Copper RO water by pressing the
Soft-Touch button. If the copper LED is red, it will
not allow dispensing. In such a case check for
presence of water from the main line, wait for
sometime, then switch off and switch on the
purifier again. If the LED is still red, then contact
Pureit helpline.
Can I dispense water in the absence of
electricity?
Depending on the amount of water already filled
in the tank, you can dispense upto 8 litres of water
even without electricity when tank is full by
installing manual tap as spare by an authorized
service technician. However, Copper RO water can
be dispensed only with electricity as Copper is
infused in real time.
Does Pureit copper water boost immune system?
Consumption of 2 liters of copper charged RO
water every day, will add up to approximately 30%
of the RDA for copper( for adults, as guided by the
Indian Council of Medical Research, ICMR). Copper
helps to boost immunity for individuals with
deficiency of copper.
What are signs of a weak immune system?
Frequently falling sick with signs of inflections are
some of the indications of weak immune system.

8. WIDE RANGE OF WATER PURIFIERS FROM PUREIT
Disclaimer: All images used in this manual are illustrative and the actual product may differ.