Kotlin Multiplatform & Compose Multiplatform - Starter kit for pragmatics
Unit 7 - Task 3 – P4,P5,M2
1.
2. First of all, before you perform any
installation, make sure that you have
disconnected the power supply.
3. We then had to take the wireless NIC card out of
the anti – static bag to get ready to install it into
the computer.
4. Then you will need to slot your card into the
motherboard slot, make sure you have placed it
into the correct slot and don’t try to force it into
the wrong slot.
5. Then you will need to lock the card into
place by pushing the locking arm down until
you have heard it click into place.
6. Once it has then been installed, you will be
able to then screw the antenna onto the
card.
7. Once you have done this, you are finished
installing the wireless NIC card.
8. First of all, you will need to choose the
correct model and type of your wireless NIC
card.
9. Once you have chosen your card, you will
then need to click on ‘Auto Run’ to start the
installation.
10. You will then want to click on the ‘Repair’
option and then click next.
11. Once you have done that, it will start to
install the driver for your wireless NIC card.
12. You will then need to choose what network
you want your card to connect to. If your
network doesn’t appear, try pressing the
‘Refresh’ button.
13. You will then start to connect to your chosen
network.
14. Once you have done that, you have finished.
The following picture is an example of what
it will look like when your wireless NIC card
has connected to your chosen network.