1. Curriculum Vitae
____________________________________________________________________________________
_________________________________________________________________________
Mechanical Engineer: Jesús Ricardo Leyva Moroyoqui
1
CURRICULUM VITAE
PERSONEL INFORMATION:
NAME: JESUS RICARDO LEYVA MOROYOQUI.
PROFESSION: MECHANICAL ENGINNER.
BIRTH DATE & PLACE: APRIL 03/1972, NAVOJOA, SONORA.
NACIONALITY: MEXICAN.
STATUS CIVIL: MARRIED.
PROFESSIONAL NUMBER: 2837891.
SECURITY NUMBER (IMSS): 5794724149-3.
CURP NUMBER: LEMJ720403HSRYRS01.
R.F.C.: LEMJ-720403-2L9.
MAIL: rleyvaimec@gmail.com / rleyva.imec@hotmail.com
ADDRESS:
Villa del Jardín No. 33. Fraccionamiento Villa del Real
Hermosillo, Sonora, Mexico.
CP: 83104.
PHONE:
01(662)261-9537 (House, Hermosillo).
01(622)146-9780 (Cel).
OBJECTIVE:
Offer my knowledge and experience on Industrial, Commercial or Service Company to improve, optimize
and manage productive systems and resources using engineering tools, working under team, quality and
continual improvement philosophy, to offer to my family an economic stability and moral on the
community.
ACADEMIC TRAJECTORY:
PROFESSIONAL: INSTITUTO TECNOLOGICO DE HERMOSILLO (1990 – 1994).
Profession: Mechanical Engineer.
Thesis: Implementation and Manage of Maintenance on Industrial Plants.
HIGH SCHOOL: CENTRO DE BACHILLERATO TECNOLOGICO Industrial y de Servicios No. 64 (1987 –
1990).
Speciality: Internal Combustion Machines Technician.
SCHOOL: ESCUELA SECUNDARIA TECNICA No. 5 (1984 – 1987).
Speciality: Internal Combustion Machines Technician.
ELEMENTARY SCHOOL: ESCUELA PRIMARIA GENERAL IGNACIO ZARAGOZA (1978 – 1984).
TRAINING RECEIVED:
 Operation of Open DMIS software for Coordinate Measure Machine (Borbolla Metrology – 24 hrs).
 Measurement System Analysis (MSA) 3rd Edition (Centro Metrologico de Mexico - 24 hrs).
 Six Sigma, Lean manufacturing and Kaizen (Mitutoyo and Black Belts).
 Introduction to Polymers and Molding Injection (Resirene). Drying of Polymer and Molding
Troubleshooting (Bayer & GE Plastics).
 Plastics, Injection Machine, Tools and Processing (Internal).
 Statistical Process Control. Poka Yoke. Seven Step problem Solving (Intel). 8 Ds.
 Geometric Tolerances applied ASME 14.5Y 1994. Calibration of Instrument applied ISO 10012-1 and
ISO-IEC Guide 25 (Mitutoyo).
 ISO/QS 9000. Quality System Internal Auditor.

2. Curriculum Vitae
____________________________________________________________________________________
_________________________________________________________________________
Mechanical Engineer: Jesús Ricardo Leyva Moroyoqui
2
 Operation, maintenance and Programming of Starrett Coordinate Measuring Machine, Tinius Olsen
Plastometer (Melt Flow Analysis) and Moisture Analyzer Machine Omnimark High Performance.
 Preventive, Predictive and Total Productive Maintenance. Mechanical Vibration Analysis. Electro-
pneumatic and PLC.
DCM Manufacturing, Inc (Mexico Facility):
Manufacturing Engineer Manager (2014 to date):
 Coordinate new product validation (molding and assembly). Improve the assembly takt time to run the
assemblies to BOM cycle time, and then find out constrains in order to improve the efficiency.
 Tool Room leader, coordinate the mold maintenance program, mold repairing and spare part and
material stock, the objective is to have all mold ready for production, also, new fixture are designed
and made for production as needed.
 Process Molding leader, focus on process improvement in order to have better quality of the parts, a
systemic methodology is following to improve the molding parameter process. Identify the root cause
to the issues found and document the solution in the quality system to avoid the same issue again.
The weakness of the mold tech & set up are identified and improved.
 Safety Coordinator, work with safety department of the shelter to have the facility in order with all
requirements of Civil Protection and Mexican Work Secretary (STPS).
Quality Manager (2009 – 2014):
 Validation of the products transferred from USA facility to Mexico Facility, molded and assemblies
following the PPAP Process.
 Implementing the Part Quality Validation to release the production line to production, thought the
Quality auditor.
 Implementation of the Incoming Inspection of the component and resin.
 Coordination of the Calibration system.
 Leader of the Preventive and Corrective Action.
 Maintain the ISO 9000 Certification.
MOLL INDUSTRIES, Inc.:
Metrology, SPC and Incoming Inspection Eng: Since February 2003 to January 2009.
 Mi function is planning, coordinate, execution and analysis of Statistics Studies as GR&R and Process
Capability, also the Layout Inspection (PPAP Process). Coordination of Measurement Equipment
Calibration. Other responsibilities are described below.
 Responsible of the Statistical Process Control.
 Coordination of Incoming Inspection and correctives action to the suppliers.
Personnel in Charge: Two Metrology Technician and one Incoming and SPC Technician.
Molding Process Eng: Since September 2002 to February 2003.
Mi function was the optimization of injection molding process; DMAIC and Scientific Molding Methodology
were used.
Plant Maintenance Supervisor: From January 2001 – September 2002.
 Mi function was managing and Improve of Preventive Maintenance System.
Personnel in Charge: Six Maintenance Technicians.
Molding Process Eng: From January 2001 – August 2001.
Mi functions were:
 Improve injection-molding process.
 Tool set up and starts production.
 Preventive maintenance to tools.
Quality Eng: From August 1999 to January 2001.
 Coordination of Quality Inspection Process.
 Analysis of material rejection.
 Continual Improvement of the process using SPC and Training.

3. Curriculum Vitae
____________________________________________________________________________________
_________________________________________________________________________
Mechanical Engineer: Jesús Ricardo Leyva Moroyoqui
3
Personnel in Charge: Four quality auditors.
Metrology Eng: From 1998 to August 1999.
My responsibilities were:
 Implementing of clause 4.11 of ISO/QS 9000 (Control of Measurement, Inspection and Test
Equipment). Procedures were developed and implemented.
 Coordination of Measurement Equipment Calibration. Evaluate suppliers.
 Coordination and analysis of Measurement System Studies (Repeatability, reproducibility, Bias,
Stability and Linearity), ISO/QS 9000 requirements.
 Developed and analysis of Process Capability Studies.
 Developed and analysis of First Article Inspection Report (Full Layout Inspection).
 Training to Metrology technician on operation of Optical Comparator, Micrometer, Caliper, High
stands, CMM, etc.
 Operation, tip calibration, programming and maintenance of CMM.
 CMM Stability monitoring and Metrology Room condition (temperature and humidity).
 Fixture design for parts inspection.
 Resin Moisture & Melt Flow analysis.
 Calibration of Instruments (Manometers, Pin Gages and Calipers).
Personnel in charge: Two Metrology Technicians.
Manufacturing Eng (Intel Production Lines): From September 1997 to June 1998.
My responsibilities were to install the production lines and implementing the preventive maintenance to the
Tampo Print Machine, Oven, Label machine and the latch press. Process control and defects reduction of
Labeling process, latch press and ink printer. The Intel Methodology was used to improve the process.
Personnel in charge: Five Maintenance Technicians.
CEMEX – MEXICO (Technical Manager): From September 1996 to September 1997.
My responsibility was the Implementation and Standardization of Preventive Maintenance System (J.D.
Edwards), Classification and technical Specification of equipment.
CEMENTOS DEL YAQUI: From June 1994 to September 1996.
My activities were:
 Administration of Spare Parts and Material (Mine Area).
 Auxiliary on Administration of Preventive Maintenance (Mine Area and plant).
 Implementation of Preventive Maintenance on Coke Section (Calcinations Area).
 Auxiliary on the Implementation, developed and Monitoring of Predictive Maintenance (Vibration
Analysis, Thermograph and Oil Analysis).
 Development of Spare Parts List of different types of equipments.
SOFTWARE:
Windows, Excel, Word, Power Point, Applied Stat (SPC Software), MiniTab R14 (Statistic Software), Auto
CAD 2002, Auto CAD LT, Master Cam X (Basic), Solid Work.
English:
Write 90%, Speak 70%.