The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
Audio Media International Buyer's Guide 2011 Microphones
1. AUDIO-FOR-VIDEO • BROADCAST • INTERNET AUDIO • LIVE SOUND • MULTIMEDIA • POST PRODUCTION • RECORDING
AUDIO MEDIA
THE INTERNATIONAL
BUYER’S GUIDE
THE WORLD’S LEADING PROFESSIONAL AUDIO TECHNOLOGY MAGAZINE
A SPECIAL PROMOTIONAL PUBLICATION FROM THE NEWBAY MEDIA GROUP
MICROPHONES
2011
PRODUCED BY
AUDIO MEDIA
In association with:
I N T E R N AT I O N A L E D I T I O N
2. Scan with a QR reader on your
smartphone to see the NT2A video
From the people that brought you the biggest selling studio recording
microphone of the century comes the NT2A – a large diaphragm condenser
mic combining extraordinary sound quality with almost limitless versatility.
With variable polar patterns, pads and filters, the NT2A delivers stunning
recordings on everything from vocals and
acoustic instruments to drums and
guitar cabs. Truly a microphone for life.
Amazing value, the NT2A Studio Solution pack combines
an NT2A mic with a FREE shockmount, pop shield, mic
cable, dust cover and DVD guide to recording.
Find out more at rodemicrophones.com
Exclusively distributed in the UK & Ireland by Source • www.sourcedistribution.co.uk/rode • T: 020 8962 5080
4. + + + + MIC TIPS + + + + MIC TIPS+ + + + MIC TIPS+ + + + MIC TIPS+ + + + MIC TIPS+ + + + MIC TIPS+ + + + MIC TIPS+ + + + MIC TIPS+
Microphone Tips
Recording with a microphone is often more simple than people think. With correct placement, the
right mic choice, and the most direct route to the recorder you can create a high quality recording
with a natural tone and good rejection of unwanted noise.
1. Mic Placement does. Listen to the instrument being played a good start – that’s two cardioid mics placed
This has to be the most important point of this in your recording room, then listen to your facing each other at right angles, so the heads
list, if you remember anything from this list recording – does it sound as rich and detailed, are nearly toughing each other. This keeps
remember MIC PLACEMENT. Experiment with or a thin and poor impression? Obviously if the phase problems down and is simple to adjust
moving the mic around the instrument, try using recording room is not so nice it’s more of a job on one stereo mic stand for trying different
one ear by turning it toward the instrument and of getting the instrument to sound right first heights. Don’t forget a room mic or two, these
moving around till you find a sweet spot. then finding a mic position. can be any type of mic, I’ve even used talk back
Sounds obvious I know, but I never cease to be mics (really nice as it can have some kind of
amazed at poor recordings because someone’s 5. Recording vocals hard compression built in) dynamics, condensers,
placed a mic in a less than optimum position, Dead, dead, and even deader is how you want ribbons, different distances from the kit and
such as next to a rattling drum or air con unit! your room. Any reflections recorded onto a positioning in different directions. I often put
vocal take are impossible to get rid of, and lots up and delete the ones I don’t like later.
2. Mic Settings don’t normally sound very nice. The use of the With some nice EQ and compression the
For the majority of recordings the pick-up modern day mic sound filter that envelopes room mics can add extreme power to your
pattern is normally set to cardioid, however the mic by placing a half round sound proof drum sound.
omni is the purest pattern and has a more barrier is almost standard now as they stop
natural sound if you have a good enough room. reflections of the voice in the room bouncing 8. Drums - No Gate!
Patterns like super cardioid and hypercardioid, back into the mic, the sE Reflexion filter being Don’t gate kits when recording, just don’t do it –
are all basic extensions of the cardioid ‘rejection’ the most popular. Position a singer’s mic slightly you’ll end up chopping off a lightly played press
shape, so a singer recording in front of the above but facing their mouth – this angle helps roll or similar and the producer will never employ
speakers because they don’t like headphones them open their throat more. Use a pop shield you again, then again nor will the drummer.
or only have one room may use a supercardioid or get them to sing off axis so wind isn’t blowing
dynamic mic and place the mic with the directly into the mic diaphragm. 9. Recording General
speakers to its rear. Record everything, usually the takes when the
6. Drums – Kick And Toms player or singer doesn’t know it’s recording can
3. Recording Rooms Placement is key. With the kick drum mic, the often be the best, and the first takes can often
Poor room acoustics need help. Are there any closer to the beater, the less bass you get – often have the most vibe before they get bored of
unwanted noises? Can you isolate them? engineers use two, one by the beater and one the song.
Is the instrument best placed in the room? inside the sound hole or if the head is off just
Try a different mic, try adding more dampening above the floor of the drum. Be careful the 10. Standfirst
to the walls – or some corrugated metal roof snare mic doesn’t pick up too much high hat by Watch for mic stands moving or touching
sheets if you want it more ‘live’. Remember to positioning it with the hat to the rear, sometimes a drum kit, these will only ruin an otherwise
remove anything that might rattle or make noise tricky with certain drummers’ set-up. great recording, and sometimes you won’t get
in the room – the usual culprits are someone Ringing toms have to be dampened – a second chance.
forgetting to take the snare off the drum. tape, Moongel, O-rings, etc – these all help
Use carpet for the mic stand and the singer to dampen the drums into a tight sound without 10. Inside-Out
try and stop any foot tapping being picked up – losing power. There are lots of budget work Lastly make sure your mic is the right way
and make sure the mic stand is tightly secured. arounds like old drum heads cut for O-rings, around! I got asked by a producer once who
With a heavy mic and noise filter you don’t want plumber’s putty in place of Moongel, etc – was working in a studio next door why their
it drooping in the middle of a take. just remember to use your ears. If it’s not vocal sounded so funny, was it the room or
right keeping trying things out. the compression? I knew straight away when
4. Recording Instruments Normally dynamic mics are used throughout I heard it, and helped the engineer avoid
Some instruments only record well with their the kit because of the high SPL – apart from embarrassment by pretending to adjust the
natural sound which includes the room, you need overheads, which need condensers or ribbons mic, whereas in fact I just turned it round
to capture a balance of the room and the direct to pick up the high frequencies of cymbals. the right way.
sound, adjusting the mic distance until you find Overhead mics can be positioned in a variety of
the right place. Too much of either results in the ways and placements depending on if you want
instrument not sounding as good as it naturally more cymbals than toms, but an X-Y set-up is
4 MICROPHONE TIPS
5. + + + + TALKING VOICE+ + + + TALKING VOICE+ + + + TALKING VOICE+ + + + TALKING VOICE+ + + + TALKING VOICE+ + + + TALKING V
Talking Voice
Producer and Engineer TONY PLATT discusses his approach to recording vocals in the studio.
V
oalists often get a bad press, task is to find a place in the room that ‘sings Encouraging them to ‘work’ the microphone
and accusations of being difficult or well’. This will also help to relax the singer and by leaning into quiet passages and moving
being prima donnas are commonplace. reassure them that that you have their best away for the loud ones will provide quite
Occasionally there may be substance to this, interests at heart. enough control over the dynamics, leaving the
but mostly I think it’s a symptom of a neurosis My philosophy remains consistent for compressor to even out any inconsistencies.
that is easy to understand. any source – get it sounding as close to your Some artists may not be capable of this and
The voice is an instrument that cannot have intended sound as possible, and the rest will the compressor will need to be applied more
its strings changed or heads tightened if it’s follow... exuberantly. The compressor will be bringing
not sounding right; vocalists have to hope it A couple of years ago I was asked to produce another component to the overall sound and
will deliver when they ask it to. They can (and the vocals for a singer in a goth rock band. therefore the right choice will get you closer to
should) exercise and develop it to gain as much She was classically trained, with – potentially – the desired result.
control as possible, but they also depend on a strong voice and wide range. Unfortunately, Incidentally, I have always found the
the skills and understanding of producers and all her recordings felt and sounded timid – hardware 1176 compressors introduce
engineers to capture it in all its glory. lacking the power they needed to compete unwelcome sibilance to most voices and avoid
with the music. She never pushed her voice using them on vocals. However, several software
The Final Frontier to full capacity because she had never heard, versions – such as the Bomb Factory one – do
Any acoustic instrument depends on the space in the room or headphones, an accurate not display this characteristic, and I find them
in which it is being played to reflect its delights representation of the effort she was putting into very useful.
and nuances, so the first and most important the performance. At this stage I normally avoid EQ unless
The solution was to walk around the studio, absolutely necessary – perhaps an HPF if there
with her singing a couple of the bigger lines, until is rumble in the room, and sometimes a slight
we found a place that had the right acoustics. middle roll-off if the voice is too harsh.
The difference was instant – she started to sing
100 percent better and actually enjoyed the In The Mix
experience. Once the vocal performance is captured and I
Next, as I normally do at the start of a vocal get to the mix I can experiment with all sorts of
session, we set up an assortment of microphones processing in the knowledge that the recording
to try out. Generally I will lean towards using has as much power and depth as the artist is
large diaphragm condensers for vocals, but I capable of delivering. Every mix is different and
will never rule anything out if it gets the right there are no standard techniques for this stage.
result. When recording Buddy Guy I had to use Even if an effect is considered inappropriate
an SM58 for his vocals because he was singing for the genre, I try not to discount it – a
in the same room as the band, with his guitar philosophy that I think stems from working with
amplifier right behind him. He would move AC/DC. The band was adamant that if we used
back and forth on the microphone, sometimes effects on any of the instruments, they weren’t
over a foot away, yet his voice was always full to be heard. This made me think hard about
and present – proof that there are times when how I used reverb and delays and so on, and
remarkable artists require exceptional solutions. the result was an enhancement of the natural
Experimenting with polar patterns can also organic power that is the AC/DC trademark.
improve the results, though this will depend For example, the use of very short delays,
on the voice and the room. For our goth rock sometimes with a little pitch change or even
singer we used a figure-of-eight pattern because phasing can widen the sound of a vocal and sit
I wanted to pick up some of the sound of her it more effectively into the mix, and I have gone
voice in the room beyond the capsule, and I this route in all styles of music from metal to jazz.
wasn’t keen on the side reflections. Neither am I adverse to introducing a little
extra power by amplifying the voice and this
Squeeze Gently has become much easier to try these days with
After best position, microphone, and mic settings plug ins.
are established, I will try different compressors. The vocal is, for me, very much the reference
My goal is to apply just enough to pull in the full point for a mix and getting the right tone,
range of the voice without losing the singer’s timbre, and perspective on it can develop a mix
control over the timbre. more easily and quickly, but it’s not always easy!
THE INTERNATIONAL MICROPHONE BUYER’S GUIDE 5
6. + + + + THE TAMING OF THE TALENT + + + + THE TAMING OF THE TALENT+ + + + THE TAMING OF THE TALENT+ + + + THE TAMING O
The Taming Of The Talent
JERRY IBBOTSON gets expert insights on getting the best out of ADR.
I
remember it like it was yesterday: stressed over which is best. A good engineer two lumps of brown coffee.”
sitting in the studio at a top London voice is also one who works out what they need to Meisner trained actors include legends like
recording outfit. The voiceover talent (a guy give the actors, so that they can give their Robert Duvall, James Caan, Steve McQueen,
off the telly) was in the booth and the producer best performance.” Gregory Peck, and Jeff Goldblum.
from the games company was sitting on a sofa Tom’s recently worked with two different Mark puts his knowledge of such techniques
behind me. I was there to act as an extra pair engineers in the same recording studio. to good use in the studio; providing actors with
of ears and because I’d written the script. “One had a great personal touch and was happy as much information as possible about their
After one take I turned to the producer and to make suggestions that kept the client calm. character and the situation they’re in.
said, “Was that okay?” The other one just shrugged his shoulders and These cues may be visual, in the form of moving
“What... oh... yeah... fine,” he said. said, ‘that’s not my decision’. I could see the or still images, or even audio, in the form of
Then he went back to filling out his expenses client’s face muscles tighten”. sound effects. As Mark said, “This is not voice
form. That, to me, sums up where voice over. This is acting.”
recording can go horribly wrong: treated as an Thoughtful Thespians
afterthought; a distraction from adding up taxi Someone who regularly sits on the other side of Take Two
receipts. As a studio engineer or technician it the studio glass from Tom is Mark Estdale, who Another take on recording dialogue in the
may not be your actual job to see that things go runs Outsource Media, one of the biggest players studio comes from Nick Kray, an ADR Mixer at
smoothly but what happens when the producer in voice production for games. As a former actor, De Lane Lea in London. Nick’s been at DLL for
goes AWOL, either literally or figuratively? he has an understanding of how thespians think six years and before that he worked at Skywalker
“Some of the best engineers I work with and this is invaluable when it comes to teasing Sound. He took a break in recording to explain
end up making decisions for the client. But they out the best performance. some of the tricks of his trade and talk about his
still leave the client with the impression that it “Actors are like racehorses,” Mark said, whole ethos.
was their choice,” actor Tom Clarke Hill told me. “They’re easily spooked. You need to “ADR is a dark art,” he said. “If I’m doing my
Tom’s been an actor and voice artist for more communicate what is actionable – what they job it’s invisible.”
than twenty years. He regularly lends his voice can actually do. If an actor can’t get a line, To be honest, talking to Nick provided a
to video games, and TV and film productions. then chances are it’s a fault with the line, whole raft of quotes and ideas that will stick in
He can’t speak highly enough of those studio not the actor.” the mind for a long time. Anyone who’s ever
engineers who play an active role is recording According to Mark, one of the problems done a decent amount of voice recording will
sessions. with recording dialogue for games is that echo many of his sentiments. Talking about ADR
“A good studio person is the one who can say there is often no single coherent narrative. itself, he said, “It’s the only production work
‘That take is the one to use because...’ rather Because a game is broken down into small within post production. This is the only time in
than simply sitting there letting the client get chunks, and because there may not be one post where live stuff is being made.”
single outcome to the ‘story’, it’s harder for That’s something that he drives home to
an actor to get a grip on their character. directors and actors who are stepping into the
This is especially true for open-world, world of ADR for the first time, often reluctantly.
‘sand box’, games. He sits them down and stresses that ADR is not
“My perspective is to understand how actors really post-production. They (the actors) are
train and how they work,” he told me. “One way still performing, just as they were on set or on
is the Meisner Technique, which is all about location. This is filming but without the cameras.
truthfulness in performance.” The concept is the same as Mark Estdale’s quote
For those not well versed in drama theory, from earlier – it’s not voice over at all.
Stanford Meisner was an American theatre Then comes the comment that will stay with
practitioner who gave his name to a method of me the longest, possibly because it’s something
acting. It’s based on the idea that every action I see every day in my own production work.
a character takes is in reaction to another. “My job is thirty per cent technical.
Sit a character in a room on their own and And that thirty per cent is the same as most
you’d never know, for example, that they were a people’s one hundred per cent. But the rest,
fastidious control freak. Have them answer the the remaining seventy per cent, is public
question, “What would you like to drink?” and relations. Dealing with people.”
you’d quickly learn: “A coffee. Columbian. “It’s about getting people into the right
Nick Kray. Freshly ground. Filtered. White whole milk and headspace to produce what’s needed in an alien
6 THE TAMING OF THE TALENT
7. microphones 2011
OF THE TALENT+ + + + THE TAMING OF THE TALENT+ + + + THE TAMING OF THE TALENT+ + + + THE TAMING OF THE TALENT+ + + +
landscape. They’re not on set any more and Bringing Fantasy To Life
can’t, for example, see someone holding a gun One thing that voices can suffer from is the
at them. They can’t see other people and react overwhelming feeling that the characters are
off them in the same way.” standing in a Soho voice booth rather than in
Which is where the public relations element the middle of a fantasy forest or in the thick of
comes in. Nick goes to great lengths to talk a fire fight. If you think the audience doesn’t
to the actors on a non-technical level; to get notice such things, believe me it does.
to know them as people. He aims to find a What are the techniques that a voice
common ground with them so that they’re not recordist can employ to help place a voice in
fazed by being in a studio with a huge mixing the right environment? In Nick Kray’s work as
desk staring at them. a movie ADR Mixer, it’s essential to replicate
“I don’t want technology to get in the way. the sound of the original location dialogue as
A desk and studio can look inhuman. So I sit closely as possible. A character has to ‘be’ in,
down on the sofa with them to begin with for example, the Wild West and not just in W1.
and we look at the scene we’re working on, “I’ll often find out what microphones
over and over.” they used on set and hire some in for our
He’s happy to admit that he’s a bit of session. Using location mics means half the
a chameleon: changing how he behaves battle is won.”
according to who he’s working with: “Some The next step is microphone placement. Tom Clarke-Hill.
actors may not want to do certain things, so my Or rather, actor placement. “In the large theatre
But to Nick, it’s still the human, personable
job is find a way round that. Putting up barriers here at DLL, I can put an actor in the middle of
approach that wins through. He judges a
would frustrate the director, which is the exact the room with a few mics around them.
successful session by the smile on the director’s
opposite of what I’m trying to do.” They can get a sense of space and distance.”
face and his willingness to share a few beers in
Nick is sympathetic to actors who might Bearing in mind that Nick has worked on
the pub afterwards.
become aggravated in the ADR studio, some of the biggest movies in the world, he
From actor Tom Clarke Hill comes a similar
acknowledging that they are ultimately the swears by something of fairly humble origins
message. “I got into voice work because I love
ones who will be judged by their performance. and has been evangelising about it to studios
sound. I didn’t get into it to crank the rubbish
This comes back to ADR being invisible: a good in the States.
out and leave. You need to be having some fun
or bad performance will be laid at the actor’s “It’s the sE Reflexion Filter. I’ve stuck these
hanging out with the actors and doing some
feet, not the engineers. in the ADR theatre, quite far back from actor,
recording at the same time. Get all the egos
with a Schoeps boom mic inside. They allow me
out of the way.”
Session Opener to use all the space we have. I swear by them.”
What about technical tips? At Outsource Media,
Mark Estdale has a few basic principles that
have helped him create a highly successful
business and a solid reputation. For example,
“The control room is on constant open-mic
talkback. It keeps the session flowing and
focuses people’s minds.”
This point is echoed by actor Tom Clarke
Hill, who has an enviable pedigree in voice work.
“Turning off talkback is a bad thing,” he told
me. “I can see them through the glass having
a heated conversation but they’ve cut me out.
If that’s what they want to do then fine, but
there’s no reason for it. I might use the time to
make notes on my script but often I’ll walk into
the studio with them.”
Not having tunnel vision when it comes to
scripts is also vital, according to Tom. “A good
engineer will spot that there might be some
shouting right at the start of the script and shift
it to the end. There’s no point in shouting for
half an hour if you then have to do really quiet,
gentle stuff. The actor’s voice might be croaky
by then. Save the shouting or the death gurgles
to the end of the session.”
THE INTERNATIONAL MICROPHONE BUYER’S GUIDE 7
8. + + + + A KG A C O U S T I C S + + + + A KG A C O U S T I C S + + + + A KG A C O U S T I C S + + + + A KG A C O U S T I C S + + + + A KG A C O U S
AKG Microphones –
Testament to Audio Quality Tradition
From the studio, to the live stage, to the broadcasting booth, AKG continues to supply the professional
audio realm with quality microphones, backed by decades of a highly respected reputation.
As the music business continues to evolve, Combined with AKG’s Professional, Affordable Quality
HARMAN’s AKG has a long-standing reputation HC 577 L, which is insensitive to The price is no match for AKG’s
for offering studios, artists, and producers the moisture, perspiration, and salts, Perception 820 Tube microphone.
highest quality microphones. suppresses cable Raising the bar in the class of
Providing continued international noise through a dual- affordable mics, the 820 offers
AKG
leadership in the professional audio diaphragm transducer nine different pick-up patterns,
microphones, remote-control switchable bass-cut
market, AKG’s DMS 700 V2 wireless and sits comfortably
system, iPhone App 2.0, C 414 XLS including the on the user and also filter, a ground switch that prevents
and XLII, and Perception 820 Tube famous C 414 becomes virtually unwanted hum; and includes a
flex the company’s vocal muscles in all series, have invisible on stage spider suspension, mic and power
categories and genres of music. been part of under the lights or cable, and metal carrying case –
countless records, on camera, the the ultimate in affordability.
The Next Level in Reliable Wireless awards and DMS 700 V2 is one The 820 was constructed
Audio Transmission performances. of the top wireless and designed with superb quality
AKG’s DMS 700 V2 improves the link systems on the and low production cost in mind.
quality and increases working range market.
of transmitters, allowing freedom in applying a A Classic is Reborn
wireless solution to any room in size from a small, Control Functionality and Style Surrounded by a seemingly limitless
intimate venue, to a stadium. The successor of at your Fingertips number of top hits, AKG’s C 414
the successful DMS 700 system, includes a AKG’s iPhone App 2.0 provides continually improves with the next
512-bit encryption, AES EBU output and users advanced control generation XLS and XLII. The C 414
improved latency, link quality and range. functionality, managing wireless provides the lowest noise floor ever
The C 414 comes complete among competitors and previous
The wireless system includes the DPT 700 system parameters, from the
with everything you need to
bodypack for the ultimate in gain control. name of the set-up to the create great sound recordings, models of the C 414 series.
For existing systems AKG offers an upgrade frequency signals, while possible including: a carrying case, a The C 414 XLS maintains the
pop filter, a windscreen, and
package that upgrades latency by 1msec, solutions for solving signal issues spider-type shock mounts.
sonic character of the legendary
512-bit encryption, offers the DPT 700 manual are also addressed. An ALERT C 414 B-ULS, the longest-lived
microphone input gain 0, +10, and +20dB, system automatically issues a C 414 model. Engineered for the
and increases headphone output level 24dB. warning with a low battery or AKG’s friends highest linearity and neutral sound,
antenna malfunction. With a Wi-Fi include: Brooks & it is the most universal and versatile
connection, users are connected to Dunn, Missy Elliot, large diaphragm microphone
the AKG HUB 4000 Q, which can released in decades. Widely used
The Faint, Jon
be used side-by-side with HiQnet for accurate, beautifully detailed
Hiseman, Alejandro
System Architect™ as the entire pickup of any acoustic instrument,
Sanz, Sepultura,
system is based on the advanced the C 414 XLS combines proven
HiQnet protocol. Steve Stevens, reference quality, leading-edge
The application is available on Kanye West, technology, and state-of-the-art
the Apple iTunes store. Trey Songz, and components.
other international The C 414 XLII is the successor
superstars. of the famous C 414 B-TL II.
It shows the unique sonic signature
of the highly sought-after AKG C 12,
which enables lead vocals and solo instruments
to be placed even in a dense mix. The unrivalled
up-front sound is also well known for distant
miking applications like classical music recording
or drum ambience miking.
8 PROMOTIONAL FEATURE
9. microphones 2011
T I C S + + + + A KG A C O U S T I C S + + + + A KG A C O U S T I C S + + + + A KG A C O U S T I C S + + + + A KG A C O U S T I C S + + + + A KG A C
UK Distributor
Sound Technology Plc.
Letchworth Point, Letchworth
Garden City, Herts SG6 1ND
e info@soundtech.co.uk
t +44 (0) 1462 480000
f +44 (0) 1462 480800
w www.soundtech.co.uk
India Distributor
Hi-Tech Audio Systems PVT. Ltd.
3406, Desh Bandhu Gupta Road,
Karol Bagh, 110005 New Delhi
t +91 11 4317 4317 (30 lines)
f +91 11 2872 0461
China Distributor
Action Audio
Musical Instruments Ltd.
3 Hong Ye Road, Wang Gang Town,
Pudong District, Shanghai
e music@tomleemusic.com
t +852 2737 7688
f +852 2730 3573
w www.tomleemusic.com
HARMAN (www.harman.com) designs, For a complete list of AKG
manufactures, and markets a wide range of audio distributors, please visit
and infotainment solutions for the automotive, http://www.akg.com/distributors.
consumer, and professional markets – supported
by 15 leading brands including AKG®, Harman
Kardon®, Infinity®, JBL®, Lexicon®, and Mark
Levinson®. The company
For over 60 is admired by audiophiles
years, leading across multiple generations,
and supports leading
musicians
professional entertainers
and engineers
and the venues where
have used
they perform. More than
legendary AKG 20 million automobiles
microphones on the road today are
to capture their equipped with HARMAN
sound so their audio and infotainment
audience hears systems. HARMAN has a
every nuance. workforce of about 11,800 CONTACT DETAILS
people across the Americas, AKG Acoustics GmbH
Europe, and Asia, and Lemböckgasse 21-25
reported sales of $3.5 billion for the twelve months A-1230 Vienna, Austria
ended December 31, 2010. The Company’s shares t +43 (0) 1 86654 0
are traded on the New York Stock Exchange under f +43 1 86654 8800
the symbol NYSE:HAR. w www.akg.com
e sales@akg.com
HARMAN’s AKG, founded in Vienna, Austria more than 60 years ago has established US Distributor:
AKG Acoustics, U.S.
a reputation for superior audio equipment, holding more than 1,500 patents for
8400 Balboa Boulevard
microphones, headphones and wireless technology.
Northridge, CA 91328, USA
THE INTERNATIONAL GUIDE TO MICROPHONES 2011 9
10. ++++AUDIO-TECHNICA++++AUDIO-TECHNICA++++AUDIO-TECHNICA++++AUDIO-TECHNICA++++AUDI
Audio-Technica
The Drive for Innovation,
Quality, and Consistency
The youngest of the world’s ‘big four’ microphone brands,
Audio-Technica has employed design innovation and advanced
manufacturing to consistently break the price/performance barrier with
leading product for studio, broadcast, and live production applications.
As a world leader In The Studio professional producers and engineers.
in the design and It was with the introduction of the AT4033 in Recently added are two exciting new models
manufacture of 1992 that the company established a leading that reinforce the 20 Series reputation for
high performance position in the studio recording market. innovation and affordability. The AT2031
microphones and The AT4033 was the first ever high performance cardioid condenser is designed to be the ideal
wireless microphone large studio condenser microphone priced at microphone for use with string instruments –
systems, Audio- under US$1,000; exploiting the very latest its permanently polarised element offers
Technica has design, engineering, and production techniques, extended frequency response with a slight rise
developed market the AT4033 provided performance from a back in the high frequency range for a beautifully
leading product electret design that rivalled famous studio detailed sound. Its low self-noise and high
ranges for music condenser models several times more expensive. SPL handling capability offer a wide dynamic
recording, broadcast Special accelerated diaphragm aging methods range, perfectly suited for the most demanding
production, and live ensured performance remained consistent over applications.
production. time, which provided for a more linear response The AT2022 stereo microphone features
In each of these over a wide frequency range, even at high SPLs. two unidirectional condenser capsules in an
areas Audio-Technica Modern production methods enabled a X/Y configuration pivot to allow for narrow
delivers products level of consistency that ensured the identical (90-degree) or wide (120-degree) stereo
that have raised the performance of every microphone; with no operation. Designed for general stereo recording
performance bar necessity to produce the microphones in and field sound capture, the AT2022 provides
and established a ‘matched pairs’ for stereo recording. the spatial impact and realism of a live
reputation for design, Selling in thousands, the success of the AT4033 sound field.
engineering, and established the company’s reputation as a The new AT2022
build manufacturing high-end studio microphone manufacturer and AT2031
The pivoting capsules of excellence that is and spawned the 40 Series large diaphragm join
the AT2022 condenser mic second to none. condenser range. All models in the 40 series
allow narrow and wide It’s an adhere to the same
stereo operation. engineering and paradigm of high
business philosophy performance and value for
that originates with the company’s inception money and as testimony
in 1962 when founder Mr. Hideo Matsushita to their quality also come
introduced a moving-magnet-type stereo with the company’s
phonograph cartridge. The company went on to Lifetime Warranty.
design and produce phono cartridges and tone Audio-
arms, both under its own brand and for others, Technica’s 20
including the legendary NHK broadcast. Series also
The same high precision design and engineering strikes a perfect
techniques that made the company’s various balance of
cartridge designs so successful were also performance The Audio-Technica AT2031
applied to the manufacture of microphone and and price and
is designed specifically for
headphone products throughout the 1970s has long been
superb performance with string
and 1980s, earning the brand prestigious status popular with
instruments.
among audio professionals. aspiring and
10 PROMOTIONAL FEATURE
11. microphones 2011
IO-TECHNICA++++AUDIO-TECHNICA++++AUDIO-TECHNICA++++AUDIO-TECHNICA++++AUDIO-TECHN
microphones like the 40 Series AT4080 and New for 2011, the BP4001 (cardioid)
In addition to the unique Lifetime
AT4081 ribbon microphones as highlights of the and BP4002 (omni-directional) dynamic
Warranty offered on its 40 Series, Artist,
current Audio-Technica range. The company’s microphones are designed for all types of
first-ever ribbon mics, the AT4080/4081 feature broadcast interview and remote newsgathering and Artist Elite series microphones,
groundbreaking Audio-Technica design, with situations including ENG, EFP, and sports Audio-Technica introduced its First
no less than 18 patents pending on the new applications. Impressions trial scheme in 2009.
models. Created from the ground up, the pair Both microphones’ frequency response Covering the above-mentioned ranges
convincingly solve the problems of fragility is tailored specifically for clear, articulate (and the company’s flagship monitoring
and low output that have traditionally plagued reproduction of speech. The cardioid design headphone, the ATH-M50 along with
ribbon mics, in part through the use of a of the BP4001 reduces pickup from the premium noise-cancelling and hi-fi
proprietary MicroLinear ribbon imprint side and rear of the microphone, headphones), First Impressions allows
for excellent durability. allowing for excellent isolation of the
consumers to try microphones in their
A significant degree of hand sound source, while the BP4002’s
own particular working environment,
production, including ribbon omni-directional nature provides
free of charge, for a two-week period.
corrugation, imprint, and assembly, a balanced reproduction of
is involved in the construction of surrounding ambience. Trial mics are shipped with a discount
the new mics, which maintain the Ruggedly built to withstand voucher, redeemable in-store only against
sought-after ‘vintage-style’ ribbon a life in the field, the new Audio-Technica microphones from these
mic tone. microphones feature a hardened ranges at a participating First Impressions
Modern day classics of the steel grille, an integral windscreen, dealer. Further details are available at
recording world, the 40 Series and a back-cavity assembly that www.audio-technica.com/firstimpressions
microphones are lauded by ‘floats’ inside the handle shell,
internationally renowned engineers providing exceptional isolation from
and producers like Phil Ramone, Joe handling noise. The handle itself is dual element design, the AE3000, the AT4050,
Chiccarelli, Frank Filipetti, Nathaniel generously long to accommodate AT4041, and the ATM350 are essential tools of
Kunkel, and David Reitzas. These are microphone flags, making the BP4001 the trade. These live production series are now
among the world’s most successful and and BP4002 particularly suitable for joined by the re-engineered Artist Series, offering
best selling studio microphones today. location interviews. unrivalled performance at competitive price
points. They are already making an impression
For Broadcast On Stage in the market, with singers including Jodie Jones
In the broadcast industry Audio- In recent years Audio-Technica has using the ATM710 condenser exclusively
Technica is a brand that has become won devotees among artists and sound on stage, and other models earning a place
synonymous with high performance engineers alike for its Artist Elite Series on backline rosters.
location recording microphones performance stage microphones, in
employed in the transmission of major both wired and wireless form. With users
outside broadcast events. In particular and endorsees as musically diverse as
the company has been associated with Katherine Jenkins, Rush, Metallica,
the broadcast of international sporting The Blackout, and I Blame Coco,
competitions. For many years, the AE Series handheld models – both
official broadcast productions of the condenser and dynamic – are
Summer and Winter Games – famed for their sound quality. When
from Atlanta City to Beijing and partnered with Audio-Technica’s
Vancouver – have featured literally recently updated 5000a and
thousands of Audio-Technica 4000a Series wireless technology,
microphones. In particular the transmission quality is such that
company’s innovative shotgun designs engineers as seasoned as Dick Rabel
have enabled greater capture of close are on record as saying that there is CONTACT DETAILS
up audio in games and competitions. “remarkably little difference” between Audio-Technica Ltd (UK)
The BP4071 and BP4073 wired and wireless models with the Unit 5 Millennium Way
microphones are tailored to the needs The Audio-Technica same capsule. Leeds, LS11 5AL, UK
of critical broadcast applications with BP4001 dynamic On backline too, Audio-Technica is t +44 (0) 113 277 1441
excellent signal-to-noise ratios and RFI- broadcast interview a de facto standard for many world- w www.audio-technica.com
immunity. Innovative acoustic design microphone. class sound engineers including ‘Big’
also ensures that the new models offer Mick Hughes (Metallica, Def Leppard, Harvey Roberts
levels of directivity comparable to mics up to Slipknot), Dave Bracey (Robbie Williams), and Senior UK Marketing Manager
50% longer, and as such deliver unequalled Andy Hawkins (Pigeon Detectives). For these t +44 (0) 113 277 1441
performance in a compact package. and many others, models like the AE2500 e hroberts@audio-technica.co.uk
THE INTERNATIONAL GUIDE TO MICROPHONES 2011 11
12. ++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUDI
Audix –
A History of Performance,
Innovation and Excellence
Audix is a wholly owned American Corporation that was founded
in 1984 in Redwood City, California, and has been operating out
of its headquarters in Wilsonville, Oregon, since 1991. Audix is a
shining example of what can be achieved when a vision is fuelled
by imagination, passion, persistence, and hard work. Audix is one
of the most recognised microphone companies in the industry,
consistently raising the bar in the pro audio world with innovative,
Bonnie Raitt.
award-winning products.
At a time when most companies outsource solutions. This is apparent from the design and sound reproduction, extended frequency
their labour and manufacturing, Audix built performance of products such as the OM Series, response, and high SPL (Sound Pressure Level)
an in house, state-of-the-art manufacturing VX5, VX10, D Series, i5, SCX25A, and Micros®. handling.
facility with an emphasis on R & D, automation, VLM™ technology, combined with a very
and CNC machining equipment. This not OM Series – tight hypercardioid polar pattern and
only enables Audix to control the quality of Pioneering VLM™ Capsule Technology aerodynamic body design established the OM
the products from start to finish, it allows for In 1986, Audix designed and introduced Series as a new class of vocal microphones.
continual improvements and enhancements as a proprietary capsule for the OM series The OM5, OM6, and OM7 are the vocal
new materials and processes become available. utilising VLM™ (Very Low Mass) technology. microphones of choice amongst sound
While the process of capturing acoustic sound The principle of the VLM™ technology is based engineers and top touring artists such as Alanis
waves and converting them to electronic on a very lightweight diaphragm, which allows Morissette, Pearl Jam, George Strait, Red Hot
impulses is a very complex process, Audix for extremely fast, accurate processing of Chili Peppers, Willie Nelson, Bonnie Raitt,
always strives for the simple, most elegant incoming signals. The result is clear and natural The Doobie Brothers, Blink 182, Jimmy Eat
World and Crosby, Stills & Nash; to name
a few. This series continues to grow in
popularity year after year and has become
a standard in the industry.
VX5 and VX10 – Achieving New
Standards in Handheld Vocal Condenser
Condenser microphones are more
challenging to use in a live stage
environment. Typically, these mics are
more prone to feedback due to higher
sensitivity and are less capable of
handling high sound pressure levels.
However, many of today’s jazz artists,
acoustic-based groups, and singer/
songwriters demand studio quality sound
on stage. Audix has provided for this
demand with the development of two
outstanding condenser microphones; the
VX10 and the VX5.
The VX10 features a 21mm capsule
and requires 48-52 volts phantom power
12 PROMOTIONAL FEATURE
13. microphones 2011
IX++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUDIX++++AUD
Audix combined detachable cable. The Micros™ also feature studio
VLM™ capsule technology, quality sound, very low self-noise, and up to 129dB
transformerless design, of dynamic range. Additional characteristics of
and precision machined these mics include complete immunity from RF,
aluminum housings to achieve tailored frequency response, three application
The Audix DP-QUAD, new performance standards specific levels of sensitivity, and a wide variety of
Audix’s newest mic in live sound and recording. optional clips and accessories.
With the introduction of Coupled with the MicroBoom™, a portable
pack.
the D6 in 2002, Audix set lightweight carbon fibre boom arm available in
for operation. Ideally suited for stages with the world standard for kick varying lengths of 24, 50, and 84 inches, the
one featured vocal artist, the VX10 will provide drum microphones. The tradition continues Micros have raised the bar when it comes to
unmatched studio quality sound for with the recent development of the i5; a well- overhead choir miking applications.
live broadcasts and performances. rounded general purpose utility mic with The M1255B features an unprecedented
The VX5 features a 14mm capsule outstanding results on snare and output sensitivity of 32 mV/Pa and operates on
and switches for -10 dB pad guitar cabs. Audix simplified a minimum phantom voltage of 18 volts. It is
and bass roll-off. The VX5 is the challenging task of selecting ideally suited for distance learning and conference
an electret condenser vocal microphones to use for drum systems. The most recent products developed
microphone requiring kits, percussion ensembles, utilising this highly sensitive capsule include the
phantom power of 9-52 piano and general studio M40 and M70 ceiling microphones, which are
volts. Providing a very wide sessions by being the first in designed for permanent installation.
frequency response with the industry to pre-package
rich lows and detailed highs, several different configurations
the VX5 will meet the most of microphones into ‘mic
demanding requirements for packs’.
a wide variety of live sound
applications. SCX25A – Destined to Become a
Classic
The D Series & i5 In the world of studio condensers,
Dynamic VLM ™ Instrument a microphone only becomes a
Microphones – Compact Design, classic when it proves itself to be
Powerful Performance indispensable. The SCX25A is just
Dynamic VLM™ instrument that. SCX25A has a large diaphragm
microphones are chosen for live capsule housed within a unique, The SCX25A on guitar.
performance due to their ruggedness, patented internal shockmount, which
utility, high SPL handling, and pattern is isolated within an intricate machined
control. The introduction of the D brass ring. This microphone has its own
Series in 1993 broadened the category signature sound that delivers a pure,
of dynamic instrument microphones open-air sound with exceptional detail
and created new possibilities for drum and realism.
and percussion applications. The SCX25A has proven to be an
outstanding microphone on piano.
Because of its small footprint and CONTACT DETAILS
acoustic behavior, it can successfully Headquarters: Audix Corporation
The VX5. be used on a short stick or in a closed 9400 SW Barber Street, Wilsonville, OR 97070
lid environment; one of the biggest t 011 503 682 6933.
challenges facing any microphone. f 011 503 682 7114
M1255B. The SCX25A is ideally suited for any acoustical w www.audixusa.com
application including vocals, guitar, strings, e info@audixusa.com
brass, overheads, woodwinds, ensembles,
and room miking. UK Distribution:
SCV Electronics Ltd.
The Micros ® – 40 Chigwell Lane, Oakwood Hill Indust. Estate,
Pushing the Limits of Size and Performance Loughton, Essex, IG10 3NY
Representing one the most intriguing t +44 (0) 208 418 1470
innovations in microphone technology, f +44 (0) 208 418 0624
The Micros™ are the world’s smallest condenser w www.scvlondon.co.uk
microphones with integrated preamp and e sales@scvlondon.co.uk
THE INTERNATIONAL GUIDE TO MICROPHONES 2011 13
14. + + + + B E Y E R DY N A M I C G M B H & C O . KG + + + + B E Y E R DY N A M I C G M B H & C O . KG + + + + B E Y E R DY N A M I C G M B H
Perfect and Legendary Sound –
Handmade in Germany
Producing true, natural sound has always been of the highest priority at beyerdynamic. This goes all
the way back to the company’s founder, Eugen Beyer, who was fascinated by the idea of recording
sounds as perfectly as possible and then reproducing them just as perfectly.
Perfect Sound Crafted By Hand Since then, scores of beyerdynamic engineers
Since the Eugen Beyer electrical engineering have continuously invented new technologies
factory was founded in 1924, beyerdynamic has to achieve ever clearer and purer sound. The
been synonymous with German-made applied result: microphones developed and handcrafted
high technology in the professional audio sector. in Germany, whose sound and quality are
The dynamic microphone he invented in 1939 legendary throughout the world.
was a first milestone – and many more followed.
The Power Of The Microphone
Whether for voices or instruments, whether at
concerts, TV performances, or in the studio,
the microphone is an integral part of the
connection between a performer and the
audience. Because a microphone does so much
more than just transform sound into electrical
impulses; it can excite you, make you scream,
make you beam, make you cry, and touch your
soul. A microphone transmits sound but it can
also transmit so much feeling. Yet another
reason for beyerdynamic to build the very best
microphones.
Currently the beyerdynamic product range
comprises, in addition to microphones, wireless
systems and professional headphones, headsets
for TV commentators and pilots, as well as
conference systems.
14 PROMOTIONAL FEATURE