1. Rogelio L. De guzman BS Mechanical Engineering
CSWIP 3.1 ( Welding Inspector ) from TWI Cert. No – 35370
Citizenship: Filipino
Gender: Male
Address: Tibag St. Gabon Abucay, Bataan Philippines.
Telephone: +639495852624/ +213658731933 / +213657825777
Email: rogz_18@yahoo.com
Language: Native Filipino, Spoken and written English.
Summary
A competent professional with 8 years of work experienced in Welding, NDT, Piping
Inspection. Presently associated in Hyundai Enggineering & Construction
Company Limited as Piping and Welding / NDE Inspector. Demonstrated skills
in inspection activities, ensuring compliance to quality standards and
maintaining all related documents. Distinction of handling in various projects
like Construction of Oil and Gas Plant, Refinery, Petrochemicals, Mining, Cement
Plant and Power Plant. Proficient in undertaking QC activities related to Piping,
Steel Structure and Pressure Vessel Fabrication and Erection in accordance with
ASME 9, B31.1, B31.3, ASME sec VIII, AWS D1.1, API 1104, ASTM and the
Project specification.
Education
Bachelor of Science in Mechanical Engineering, 2000-2005
Bataan Peninsula State University, Balanga City Bataan, Philippines
Professional Experience
QA/QC Piping / NDE / Welding Inspector
Hyundai Engineering & Construction Co.,Ltd. May 2015- Present, Ain Arnat Combined Cycle
Power Plant Setif, Algeria.
Assigned to 1200 Megawatt power plant project. 270 kilometers away from the Algers, the
capital city of Algeria. My goal is to keep on developing my knowledge and skills through
constant learning, flexibility in any work environment, adaptability to changes and
improvement while maintaining a balanced personality so as to be able to positively
contribute to any organization that I am or shall be part of.
My responsibilities were daily monitoring of Fabrication and site activities for which piping
are ready for inspection and installation, conduct pre-inspection and surveilance. Daily
coordination of supervisor and foreman of construction workforce and inspection team.
Reporting daily activities to QA/QC Manager
Preparation, review and approval of documents about Inspection Test Plan of the project to
ensure inspection shall be in accordance with the required Quality Standard and Procedures.
Execute and develop quality audit of Sub-contractors inspection documentation works for
piping, welding and nondestructive examinations, to assure that the required forms used in
testing submitted are approved by client representative as per ITP such as:
• Responsible for health and safety, tool box talks, and safety audits/walk rounds with the
client.

2. • Observed safety procedures and strictly followed golden rules of safety work, (PTW,
Confined space, Working at heights, PPE, Excavation, Lifting, Log out –Tag out, etc.
• Review Job Safety Analysis / Job Hazard analysis (JSA / JHA)
• Review contract specification / technical requirements, drawings etc.
• Review Inspection & test plans in accordance with International codes and Project
Specification
• Review Project Weld drawing , weld and NDT map and Welding Procedure Specification
• Review and witness WPS , PQR , Welders Qualification Test
• Review and control the fabrication activities as per the ITP / Contract Specification /
codes and Approved Drawing
• Executing inspection and control of RAW materials and welding consumables
• Execute Welding ,NDE Inspection and Radiographic film interpretation
• Overall quality control project responsibility such as interaction and Co-ordination with
clients, design planning , projects production, welding & NDT In Process inspection
verification stage from material Identification.
• Perform Surveillance during inspection to verify compliance with specified yard
procedure including preheat, inter pass temperature control and post heat
requirements
• Witnessing of dimension check for completed weld as per drawing and
Specification
• Review of NDT reports and Witness of NDT Inspections
• Witnessing of piping chemical flushing where ever required (Ex). Portable water Tanks.
• Witnessing Hydro testing of Piping system and Tanks and pressure „«
• Ensures that all paper work required (ie test and inspection reports, material inspection
reports, etc.) has been completed accurately and in a timely manner.
• Remains current/up-to-date regarding laws and regulations affecting all areas of
responsibilities. Adheres to Company policies, procedures and work requirements.
• Ensure that all weldments will meet the minimum requirement to suite in their
applications, and review of all NDT requirements as per project specification.
• Perform In-process surveillance to verify compliance with specified piping erection
procedure and welding parameters have been implemented as per approved WPS.
• Ensuring that the correct drawings & documents are being utilized
• Checking the correctness of materials being used & ensuring tractability where required
• Checking the applicability of the WPS utilized for the work being performed and ensure
compliance with regard to preheat, consumable and welding parameters
• Check the quality of welded fabrications for fit up, consumable, visual appearance of the
weld and the distortion.
• Verify and review the chart for Post weld heat treatment. ( heating & cooling rate,
soaking period & temperature ).
• Checking the flanged joints for correct gasket installation & witness the torque
tensioning for torque values compliance with specification
• Performing piping walkthrough inspection prior to hydrotest & pre commissioning and
completing punch lists. Verifying that punch list items have been dealt with in
accordance with the contractual arrangements.
• Review hydro test pack, carry out inspections of the lines prior to testing,
witness tests & validate re-instatements of the systems.

3. • Verifying that punch list items have been dealt with in accordance with the contractual
arrangements.
QA/QC Piping / Welding Inspector
Dynamac-Keppel Phils., December 2013 - November 2014, Malampaya Gas plant Expansion
Subic Zambales, Philippines
Assigned in construction works of a Depletion Compression Platform (DCP) for the Shell
Philippines Exploration BV (SPEX) Malampaya gas field project to be deploy, near Palawan
Island, Philippines
DUTIES AND RESPONSIBILITES:
• Ensure safety was implemented before starting work activity.
• Observed safety procedures and strictly followed golden rules of safety work, (PTW,
Confined space, Working at heights, PPE, Excavation, Lifting, Log out –Tag out, etc.
• Review Job Safety Analysis / Job Hazard analysis (JSA / JHA)
• Supervise subcontractors welding and piping works by monitoring welder performance,
welding process, welding material, handling and welding inspection results, calibration of
welding and PWHT machine, preservation of piping materials and fit-up.
• Witness qualification tests for welding procedures/welder qualifications and evaluate the
test results, and reviews and maintain subcontractors WPS and Welder Test Certificate.
• Ensures that the required procedure qualification is carried out by a 3rd
party group.
• Ensures that all welders are fully qualified to the procedures required by the project
standards, and that their qualifications are current.
• Will monitor the performance of welders, while implementing and monitoring proper
storage and usage procedures for welding tools and equipment
• Visually verifies that the incoming materials have met the requirements for welding
works, such as quality and dimensional tolerance levels, witnessing qualifying tests for
welders as required.
• Review radiography results and advise construction supervisors of repairs required.
• Carry out an analysis of the defect/repair and advised welder of probable cause.
• Follows inspection and test plan for the welding works and carries out the various stage
inspections and tests, records findings, prepares various reports.
• Liason with the contractor’s inspection and construction staff for intermediate and final
acceptance of the work ensuring that all required testing has been performed.
• Advise field staff of poor quality work and deficiencies detected during inspections and
assist/advise on remedial works required.
• Report deviations from requirements of contract documents to QA/QC Manager
• Investigates/anticipates work problems and takes/recommends suitable action to correct
deficiencies.
• Maintains and enhances sound relationship with contractors/sub-contractors and
subordinates.

4. • Ensures that all paper work required (ie test and inspection reports, material inspection
reports, etc.) has been completed accurately and in a timely manner. Ensure that copies
are handed over to the WinPCS©
technicians for input.
• Carries out other duties as assigned by the immediate supervisor.
• Remains current/up-to-date regarding laws and regulations affecting all areas of
responsibilities. Adheres to Company policies, procedures and work requirements.
• Ensure that all weldments will meet the minimum requirement to suite in their
applications, and review of all NDT requirements as per project specification.
• Perform In-process surveillance to verify compliance with specified piping erection
procedure and welding parameters have been implemented as per approved WPS.
• Ensuring that the correct drawings & documents are being utilized
• Checking the applicability of the WPS utilized for the work being performed and ensure
compliance with regard to preheat, consumable and welding parameters
• Conduct weld audit and ensure that welding parameters are conformance with WPS.
• Check the quality of welded fabrications for fit up, consumable, visual appearance of the
weld and the distortion.
• To carry out hardness test on production welds as per project requirement.
• Prepare heat treatment operating sheet & verify the chart for ( heating & cooling rate,
soaking period & temperature ).
• Witness the gauging & flushing of piping system as per specification.
• Checking the flanged joints for correct gasket installation & witness the torque
tensioning for torque values compliance with specification
• Performing piping walkthrough inspection prior to hydrotest & pre commissioning and
completing punch lists. Verifying that punch list items have been dealt with in
accordance with the contractual arrangements.
• Review hydro test pack, carry out inspections of the lines prior to testing,
• witness tests & validate re-instatements of the systems.
• Performing piping walkthrough inspection and completing punch lists.
• Verifying that punch list items have been dealt with in accordance with the contractual
arrangements.
QA/QC Piping / Welding Inspector
Chiyoda Corporation, February 2013 - November 2013, PNG-LNG Project
Papua New Guinea
The PNG LNG Project is an integrated development that includes gas production and
processing facilities, onshore and offshore pipelines and liquefaction facilities.
DUTIES AND RESPONSIBILITES:
• Observed safety procedures and strictly followed golden rules of safety work, (PTW,
Confined space, Working at heights, PPE, Excavation, Lifting etc.
• Review Job Safety Analysis / Job Hazard analysis (JSA / JHA)
• Responsible for health and safety, tool box talks, and safety audits/walk rounds with the
client.

5. • Supervise subcontractors welding and piping works by monitoring welder performance,
welding process, welding material, handling and welding inspection results, calibration of
welding and PWHT machine, preservation of piping materials and fit-up.
• Witness qualification tests for welding procedures/welder qualifications and evaluate the
test results, and reviews and maintain subcontractors WPS and Welder Test Certificate.
• Ensures that the required procedure qualification is carried out by a 3rd
party group.
• Ensures that all welders are fully qualified to the procedures required by the project
standards, and that their qualifications are current.
• Will monitor the performance of welders, while implementing and monitoring proper
storage and usage procedures for welding tools and equipment
• Visually verifies that the incoming materials have met the requirements for welding
works, such as quality and dimensional tolerance levels, witnessing qualifying tests for
welders as required.
• Liaise with 3rd
party NDE inspection group and ensure that all NDE is carried out in
accordance with the contract requirements.
• Review radiography results and advise construction supervisors of repairs required.
• Carry out an analysis of the defect/repair and advise welder of probable cause.
• Follows inspection and test plan for the welding works and carries out the various stage
inspections and tests, records findings, prepares various reports.
• Liason with the contractor’s inspection and construction staff for intermediate and final
acceptance of the work ensuring that all required testing has been performed.
• Advise field staff of poor quality work and deficiencies detected during inspections and
assist/advise on remedial works required.
• Report deviations from requirements of contract documents to QA/QC Manager
• Investigates/anticipates work problems and takes/recommends suitable action to correct
deficiencies.
• Maintains and enhances sound relationship with contractors/sub-contractors and
subordinates.
• Ensures that all paper work required (ie test and inspection reports, material inspection
reports, etc.) has been completed accurately and in a timely manner. Ensure that copies
are handed over to the WinPCS©
technicians for input.
• Carries out other duties as assigned by the immediate supervisor.
• Remains current/up-to-date regarding laws and regulations affecting all areas of
responsibilities. Adheres to Company policies, procedures and work requirements.
• Ensure that all weldments will meet the minimum requirement to suite in their
applications, and review of all NDT requirements as per project specification.
• Perform In-process surveillance to verify compliance with specified piping erection
procedure and welding parameters have been implemented as per approved WPS.
• Ensuring that the correct drawings & documents are being utilized
• Checking the correctness of materials being used & ensuring tractability where required
• Checking the applicability of the WPS utilized for the work being performed and ensure
compliance with regard to preheat, consumable and welding parameters
• Conduct weld audit and ensure that welding parameters are conformance with WPS.

6. • Check the quality of welded fabrications for fit up, consumable, visual appearance of the
weld and the distortion.
• To carry out hardness test on production welds as per project requirement.
• Prepare heat treatment operating sheet & verify the chart for ( heating & cooling rate,
soaking period & temperature ).
• Witness the gauging & flushing of piping system as per specification.
• Checking the flanged joints for correct gasket installation & witness the torque
tensioning for torque values compliance with specification
• Performing piping walkthrough inspection prior to hydrotest & pre commissioning and
completing punch lists. Verifying that punch list items have been dealt with in
accordance with the contractual arrangements.
• Review hydro test pack, carry out inspections of the lines prior to testing,
• witness tests & validate re-instatements of the systems.
• Performing piping walkthrough inspection and completing punch lists.
• Verifying that punch list items have been dealt with in accordance with the contractual
arrangements.
QA/QC Piping / Welding Inspector
Koniambo Nickel SAS-LIS, April 2012 - November 2012, Nickel Project
Vavouto, New Caledonia
Koniambo Nickel Project is located in the North Province of New Caledonia and was officially
inaugurated in November 2014. It is one of the world's biggest and highest-grade
undeveloped nickel laterite deposits. The $7bn greenfield mining project was developed by
Koniambo Nickel SAS, a joint venture between Société Minière du Sud Pacifique (SMSP) and
Glencore (formerly Xstrata Nickel), which is the world's richest mining company.
DUTIES AND RESPONSIBILITES:
• Receives and implement instructions, documents, technical specifications and details
regarding probable welding requirements.
• Ensures that the required procedure qualification is carried out by a 3rd
party group.
• Ensures that all welders are fully qualified to the procedures required by the project
standards, and that their qualifications are current.
• Will monitor the performance of welders, while implementing and monitoring proper
storage and usage procedures for welding tools and equipment
• Visually verifies that the incoming materials have met the requirements for welding
works, such as quality and dimensional tolerance levels, witnessing qualifying tests for
welders as required.
• Liaise with 3rd
party NDE inspection group and ensure that all NDE is carried out in
accordance with the contract requirements.
• Review radiography results and advise construction supervisors of repairs required.
• Carry out an analysis of the defect/repair and advise welder of probable cause.
• Follows inspection and test plan for the welding works and carries out the various stage
inspections and tests, records findings, prepares various reports.

7. • Liason with the contractor’s inspection and construction staff for intermediate and final
acceptance of the work ensuring that all required testing has been performed.
• Advise field staff of poor quality work and deficiencies detected during inspections and
assist/advise on remedial works required.
• Report deviations from requirements of contract documents to QA/QC Manager
• Investigates/anticipates work problems and takes/recommends suitable action to correct
deficiencies.
• Maintains and enhances sound relationship with contractors/sub-contractors and
subordinates.
• Ensures that all paper work required (ie test and inspection reports, material inspection
reports, etc.) has been completed accurately and in a timely manner. Ensure that copies
are handed over to the WinPCS©
technicians for input.
• Carries out other duties as assigned by the immediate supervisor.
• Remains current/up-to-date regarding laws and regulations affecting all areas of
responsibilities. Adheres to Company policies, procedures and work requirements.
• Ensure that all weldments will meet the minimum requirement to suite in their
applications, and review of all NDT requirements as per project specification.
• Perform In-process surveillance to verify compliance with specified piping erection
procedure and welding parameters have been implemented as per approved WPS.
• Ensuring that the correct drawings & documents are being utilized
• Checking the correctness of materials being used & ensuring tractability where required
• Checking the applicability of the WPS utilized for the work being performed and ensure
compliance with regard to preheat, consumable and welding parameters
• Conduct weld audit and ensure that welding parameters are conformance with WPS.
• Check the quality of welded fabrications for fit up, consumable, visual appearance of the
weld and the distortion.
• To carry out hardness test on production welds as per project requirement.
• Prepare heat treatment operating sheet & verify the chart for ( heating & cooling rate,
soaking period & temperature ).
• Witness the gauging & flushing of piping system as per specification.
• Checking the flanged joints for correct gasket installation & witness the torque
tensioning for torque values compliance with specification
• Performing piping walkthrough inspection prior to hydrotest & pre commissioning and
completing punch lists. Verifying that punch list items have been dealt with in
accordance with the contractual arrangements.
• Review hydro test pack, carry out inspections of the lines prior to testing,
• witness tests & validate re-instatements of the systems.
• Performing piping walkthrough inspection and completing punch lists.
• Verifying that punch list items have been dealt with in accordance with the contractual
arrangements.
QA/QC Piping / Welding Inspector
Daewoo Engineering & Construction Company Limited, April 2011 - January 2012,
GNL3ZProject, Arzew, Algeira

8. GLN3-Z project, which located in Algeria near the city of Arzew, situated about 400km (249
miles) west of Algiers. The country has proven natural gas reserves of 4.5 trillion cubic
metres, which amounts to about 2.6% of the world total, and is the world's fourth-largest
gas producer, supplying 25% of the EU's natural gas imports.
DUTIES AND RESPONSIBILITES:
• Ensure that all weldments will meet the minimum requirement to suite in their
applications, and review of all NDT requirements as per project specification.
• In-process surveillance to verify compliance with specified piping erection procedure
including flange alignments, torquing, cleanliness etc.
• To inspect hydrotest of valves and manifolds.
• Ensuring that the correct drawings & documents are being utilized
• Checking the correctness of materials being used & ensuring tractability where required
• Checking the validity of welder qualifications for the work being performed
• Checking the applicability of the WPS utilized for the work being performed and ensure
compliance with regard to preheat, consumable and welding parameters
• Conduct weld audit and ensure that welding parameters are conformance with WPS.
• To check the seam orientation during pipeline fitup as per project spec.
• Check the quality of welded fabrications for fit up, consumable, visual appearance of the
weld and the distortion.
• To carry out hardness test on production welds as per project requirement.
• Prepare heat treatment operating sheet & verify the chart for ( heating & cooling rate,
soaking period & temperature ).
• Witness the gauging & flushing of piping system as per specification.
• Checking the flanged joints for correct gasket installation & witness the torque
tensioning for torque values compliance with specification
• Performing piping walkthrough inspection prior to hydrotest & pre commissioning and
completing punch lists. Verifying that punch list items have been dealt with in
accordance with the contractual arrangements.
• Review hydro test pack, carry out inspections of the lines prior to testing,
• witness tests & validate re-instatements of the systems.
QA/QC Piping / Welding Inspector
Nesma and Partners Contracting Company Limted, January 2008 - September 2010
Various Project in the Kingdom of Saudi Arabia
Petro-Rabigh Refining & Petrochemical Project (Rabigh KSA)
Najran Grinding Unit Project(Najran KSA)
Diamonuim Granulation Plant Project (Juabail, KSA)
DUTIES AND RESPONSIBILITES:
• Ensure that all weldments will meet the minimum requirement to suite in their
applications, and review of all NDT requirements as per project specification.

9. • Ensure that the latest drawings are used in the worksite, checking the dimension and
orientation as per drawing before and after welding.
• Record, monitor and inspected visually all the weld items.
• Ensure that all consumables are treated properly as per required in WPS and project
procedures, monitoring of all welder for their daily performance and ensure that all of
them are approved by the client and qualified for the given procedure.
• Witness on how they performing Non Destructive Testing (NDT), and observing safety
practices before, during and after the activity.
• Performing inspection of fit-up prior for full welding, line checking prior for hydro testing
and witness the bolt torqueing, gasket verification and all piping components prior for
pre-commissioning.
• Experienced in reviewing of Welding Procedure Specification (WPS), Post Weld Heat
Treatment (PWHT), Non-Destructive Testing (NDT) Requirement and Painting System in
Isometric Drawing as per Material Class, Service, Design Conditions and Insulation.
• Experienced to prepare weld mapping and spooling of isometric drawing.
• Experienced to prepare hydro test package.
• Knowledgeable in drawing interpretation such as isometrics drawings, plot plans, piping
arrangements, piping and instruments diagram (P&ID’s).
Quantity Tracker
EEI Corporation, July 2007 - November 2007, Petron Bataan Refinery FCC Project
Bataan Philippines
The FCC Project expansion will enhance the Philippines' supply security and enable the
company to further meet the growing demand for LPG, gasoline, diesel and petrochemicals.
The operational efficiency of the refinery will significantly improve with the expansion, as all
the black streams will be converted into high-margin white products and petrochemicals.The
expansion will also double the propylene production capacity and the refining complexity in
the region.
.DUTIES AND RESPONSIBILITES:
• Responsible for tracking and monitoring of all fabricated materials prior for erection and
update on the system to create work schedule and use for planning.
• Compare the bill of materials against on the given drawing and estimate all materials
that will need in fabrications.
• Negotiating to the client for all revised or needs to modify the drawings, and as-built the
drawing as per actual installation at the jobsite.
• Experienced to prepare piping material take-off.
• Experienced to prepare weld mapping and spooling of isometric drawing.
• Preparing hydro test package
Assistant QA/QC Piping Inspector
IWI Engineering & Constructtion LLC, JuNE 2005 - May 2007, Sohar Aromatics Project
Oman
DUTIES AND RESPONSIBILITES:

10. • Inspection of all material delivered in the work site and reviews their MTC, mill
certificate and other documents required.
• Dimensional and visual inspection of pre-fabricated spool before full welding.
• Experience preparing test packages both Hydro and Pneumatic testing
• Perform Surveillance and NCR activities
• Line checking and Punch list prior hydro test
• System line check prior for commissioning
• Preparing QC document such ITP/MOS and Quality Procedure
• Experienced to prepare piping material take-off.
• Experienced to prepare weld mapping and spooling of isometric drawing.
• Experienced in bolt torquieng and gasket verification.
• Carry out inspection of work in progress including checking if the right procedure is
followed for the piping as well as the check for the
qualification of the piping personnel and the kind of materials being
used for the process.
• Coordinate with the discipline engineers to ensure corrective action on the above
thereby ensuring the closure of the NC’s raised.
• Report any major Quality issues to the Quality Manager of the Project Management
Team.
• Coordinate with the Project’s Safety, Environment and certification
engineer and ensure that all statutory requirements are met.
• Verification that dimensions and alignment tolerances of the piping systems are as per
constructs specifications.
• Performing piping walkthrough inspection prior to hydrotest & pre commissioning and
completing punch lists. Verifying that punch list items have been dealt with in
accordance with the contractual arrangements.
• Review hydro test pack, carry out inspections of the lines prior to testing.
• To check the seam orientation during pipeline fitup as per project spec.
• Check the quality of welded fabrications for fit up, consumable, visual appearance of
the weld and the distortion.
CHARACTER REFERENCES:
• Mr. Edgardo Remo
QA/QC lead Inspector
Shell Explorations B.V.
+639214102582 / Edgardo.Remo@shell.com
• Mr. Donghoon Kim
Daewoo QA/QC Deputy Manager
Daewoo Engineering & Construction Company Ltd.
• Eng’r. Manny B. Burgos
Manager , EEI CORPORATION FABRICATION SHOP
Puting Buhangin, Orion, Bataan

11. • Mr. Ramir Pilapil
Welding Inspector
Shell Exploration B.V.
+639495686641 / Ramir.Pilapil@shell.com
I hereby certify that the above information is true and correct to the best of my
knowledge and belief.
Rogelio L. De Guzman
Applicant