This is an official Quick Extender Pro instruction. This is a user manual for those, who want to assemble and use this penis extender. You'll be able to enlarge or straighten your penis naturally without any side effects of discomfort. This user instruction includes all the information about Quick Extender Pro spare parts, usage program. Start using Quick Extender Pro today. You'll be able to calculate your user size, add bars, silicone tubes and use different comfort accessories like Comfort Pads and Memory comfort pads. This user manual includes you penis enlargement program and routine.
Official Quick Extender Pro User Manual(PDF)/Instruction
1. Order one of four available packages at the official site using this
discount link. Use code “DEALDAY” to get 20% OFF
Deluxe Limited Edition - $349.93 (12 silicone tubes, 14 bars, 12 foam
pads, 6 pure memory comfort pads)
Deluxe Standard Edition - $179.93
Value Edition - $119
Peyronies and Curvature – $179.99
Thank you for purchasing the Quick Extender Pro™ the top name in
natural male enhancement.
Quick Extender Pro™ is committed to enhancing the quality of life of the
modern day man through non–evasive natural penis enlargement. The Quick
Extender Pro™ is a safe and effective alternative to penile enlargement
surgery and other forms of male enhancement techniques.
2. Table Of Contents
Chapter Name Page Number
Table Of Contents 1
Parts – What you get 2
Parts – Diagram 3
Description 4
Uses – Getting Started – Measurement of your penis 5–6
Getting Started – Set the User Size of your Quick 7–9
Extender Pro™
Adaptation Period 10
Evolution 11
Howto wear the Quick Extender Pro™ 12–14
Use of the Quick Extender Pro™ 15
Special Cases 16
Precaution 17–18
Ointments 19
Progress Chart 20
Order Quick Extender Pro at the official site
1 | P a g e
3. Parts – What you get
Included in your Quick Extender Pro™ package is the following:
Part Description Quantity
Number Included
“A” Large Extension Rod (1.6 inch) 6
“B” Medium Extension Rod (0.8 inch) 4
“C” Small Extension Rod (0.2 inch) 6
“D” Extra Small Extension Rod (0.1 inch) 2
“E” Pre-assembled Part 2
“F” Calibrated Spring 2
“G” Pre-assembled Part 2
“H” Pre-assembled Part 2
“I” Pre-assembled Part 2
“J” Pre-assembled Part 2
“K” Pivot 2
“L” Base Ring 1
“M” Glan Support Piece 1
“N” Silicone Tube 6
“O” Specialized Comfort Padding 6
Instructions Manual 1
Velvet Pouch 1
Carrying Case 1
2 | P a g e
5. Description Chapter 1
Official order: Use 20% discount code “DEALDAY”. Click here t buy
The Quick Extender Pro™ is a penis enlargement device also commonly
referred to as a “penis extender”. The enlargement method behind the Quick
Extender Pro™ is approved by physicians worldwide and has been used for
years in private clinics in order to correct curvature of the penis and also for
post penile surgery treatment.
The Quick Extender Pro™ allows you to quickly and painlessly enlarge your
penis from the privacy of your home with this instruction manual as your
guide and without a physician’s supervision. Please follow the instructions
outlined in this manual carefully as your results and safety depends on our
specially planned program. This is the latest version of the traction controlled
penis extender and it is engineered with your safety and comfort in mind.
The Quick Extender Pro™ is composed of a plastic base ring, two aluminum
rods with internal calibrated springs and a plastic support piece with double
silicone bands. The plastic components are made of hypoallergenic medical
grade plastic and the bands are made of medical grade silicone. The extension
rods and piston cylinders are composed of surgical grade aluminum. The
device is 100% waterproof and will never rust.
Official site: quickextenderpo.com
4 | P a g e
6. Uses Chapter 2
The Quick Extender Pro™ is used mainly for lengthening and thickening of
the penis through traction. It is also commonly used for corrections in penile
curvature (with or without surgical intervention). Surgeons also prescribe it
for post surgical treatment of penile lengthening surgery (phalloplasty) and
after plastic and reconstructive surgeries of the penis.
Side effects: There are no side effects as long as you follow the instructions.
Getting Started Chapter 3
Step 1: Measurement of your penis
You will need to measure your penis in order to adjust your extender to your
individual “user size”. The “user size” is the adjusted size of the Quick
Extender Pro™ to your specific penis. With a measuring tape, first measure
the length and circumference in flaccidity. Consequently measure the length
and circumference in erection. (Refer to the diagram below for measuring
instructions). Write these measurements in the supplied chart on the last
page of this manual.
Official online store: https://geni.us/quickextenderpro
5 | P a g e
8. Getting Started Chapter 4
Step 2: Set the user size of your Quick Extender Pro™
The initial size of the Quick Extender Pro™ is 3.6 inches (9 cm). The initial
size of the device is measured from the lower part of the base ring to the
upper part of the metal rods.
7 | P a g e
9. Calculate the “user size” of the Quick Extender Pro™ by subtracting 1.6
inches (4 cm) from the size of your penis in erection. See example.
Your penis size Minus 1.6
in erection inches
Inches 6 inch - 1.6 inch
Centimeters 15.7 cm - 4 cm
Equals
“User size”
= 4.4 inch
= 11.7 cm
If you have a curved or deviated penis, please follow the following graph:
*Curved penis Your penis size Minus 2 inches
in erection
Inches 6 inch - 2 inch
Centimeters 15.7 cm - 5 cm
Equals
“User size”
= 4 inch
= 10.7 cm
Buy the device officially. Click here
Now prepare the device so that it corresponds to your personal “user size”
that you had previously calculated. First, detach the upper plastic support
piece (piece “M”), by pulling it away from the device. Add the appropriate
extension rods as needed to adjust your Quick Extender Pro™ to reach your
personal “user size”.
8 | P a g e
10. The rods that you can add are:
Large extension rod
1.6 inch (4 cm)
Medium extension rod
0.8 inch (2cm)
Small extension rod
0.2 inch (0.5cm)
Extra small extension rod
0.1 inch (0.3 cm)
*Please keep in mind that 4 small extension rods are equal to 1 medium. Also,
2 medium rods are equal to 1 large rod. Once you have outgrown the 3 small
rods, please graduate to a medium rod and so forth.
So if the calculated “user size” is 4.4 inches then you must add enough
extension rods to equal that.
Example: User size of 4.4 inches (11.7cm) = Quick Extender Pro™ initial size
3.6 inches (9cm) + 0.8 inch medium extension bar (2cm).
If the “user size” of the device is smaller than the initial size (3.6 inches or 9
cm), then start the treatment with the initial size of the device.
Online store: quickextenderpro.com
9 | P a g e
11. Adaptation Period Chapter 5
Please followthis chart carefully. There is an adaptation period in order to get
your body initiated to the device.
Days Quick Extender Pro™ size Hours of use
1-5 day “User size” of the 3 hours a day
Quick Extender Pro™
6-10 day Add a 0.2” (0.5cm) rod on the 6 hours a day
6th
day
11-15 day Add another 0.2” (0.5cm) rod 8 hours a day
on the 11th
day
Use special offer to get the device with a 20% discount. Click
the official site quickextenderpro.com
*The adaptation period is a safety precaution used to initiate your body to
the enlargement process. It is highly recommended to follow this procedure
in order to maximize your results.
10 | P a g e
12. Evolution Chapter 6
Once the adaptation phase is complete, you may follow either of the
following modes:
Standard Mode (mode A) Add one 0.2” (0.5cm) 8 hours a day
(recommended) rod every 7 days
Alternate mode (mode B) Add one 0.2” (0.5cm) 4 hours a day
rod every 14 days
The 4 or 8 hour periods of usage can be split throughout the day. Take breaks
for as long as you consider necessary and apply a massage to your penis
during these breaks. As soon as you have 4 small rods, 4 rods of 0.2 inches
(0.5 cm) attached to each other, you can replace them with one 0.8 inch
(2cm) extension rod.
From the third month on you will need to slow down the size increase of the
Quick Extender Pro™. Add a 0.2 inch (0.5cm) extension rod every two weeks
or a 0.1 inch (0.3cm) extension rod every week.
If you chose to follow the alternate mode (mode B), please be aware that the
results will be obtained at a slower pace.
Order Quick Extender Pro; https://geni.us/quickextenderpro
11 | P a g e
13. *The initial traction force is set at 600 grams. This is achieved by adjusting
the length of the device to 1.6 inches less than the length of your penis in
erection. In the second month, the traction force is of 800 grams. This is the
result of keeping the length of the device the same as that of the erect penis.
In the 3rd
month the traction force will be 1000 grams as the length of the
device is 1.6 inches more than the length of the penis in erection. In the 4th
and 6th
months, the traction force is between 1200 to 1500 grams. The
traction force will adjust automatically as you increase the size of the Quick
Extender Pro™. Such traction forces are not harmful to the penis because
they are small, progressive and adaptive.
How to wear the Quick Extender Pro™ Chapter 7
Take the silicone band and introduce it into the protective cushion. The use
of this comfort cushion is compulsory. We recommend covering the penis
with cotton wool or a bandage for added comfort.
Loosely insert the silicone band along with the protective cushion into the
support piece (part “M”) forming a loop. There must be enough space for the
head of the penis to easily fit through the loop.
Introduce the penis through the plastic base ring, resting the glans (head of
the penis) on the plastic support (Part “M”). Place the left hand on the
support piece and push the device against your body to collapse the internal
springs.
Order Quick Extender Pro; https://geni.us/quickextenderpro
12 | P a g e
14. While keeping the left hand in position, use your right hand and introduce
your fingers inside the loop formed by the silicone band. Pull the glan through
the loop.
Place the left thumb on the frenulum while gradually reducing the loop by
pulling on both ends of the silicone band.
Slowly pull the skin on both sides towards your body to avoid pinching the
frenulum or leaving skin folds on the glans groove.
The silicone loop should fit snug enough on the glans groove, without hurting
but tight enough to keep the glans from slipping out. Repeat for the second
silicone tube.
If you wish, you may carefully trim the silicone band excess on the back side
of the superior support. You must however leave enough so that you can
tighten it. We recommend leaving at least 2 inches on each side.
*It is recommended that you get used to using a single strap before using the
second comfort strap.
Refer to the diagrams for further instructions.
Order Quick Extender Pro; https://geni.us/quickextenderpro
13 | P a g e
16. Use of the Quick Extender Pro™ Chapter 8
Be patient and constant with the use of your Quick Extender Pro™. It is the
only way to reach your goals in a timely manner. The first day, experiment by
putting it on and take it off at least 10 times in the day to get used to
mounting the device.
During the treatment, you will need to remove the Quick Extender Pro™
every 2 hours and let the tissues relax for a few minutes. Rest periods are
mandatory. In the advanced stages you must rest every hour or hour and a
half. Apply a massage to your penis during the breaks.
It is advisable that the device should be worn folded upwards, behind the
zipper area of your pants. Wear comfortable, loose fitting underwear and
trousers. The device must be cleaned with non scented soap and water every
4 days.
If you do not wear the device for 15 to 30 days, begin treatment at 0.4 inches
(1 cm) less than the size of the device at that time where you stopped the
treatment. After 5 days add a 0.2 inch extension bar and repeat the increment
of 0.2 inches in 5 more days. After this 10 day adaptation period resume with
the chosen mode.
Order Quick Extender Pro; https://geni.us/quickextenderpro
15 | P a g e
17. Special Cases Chapter 9
CORRECTING PENILE CURVATURE:
The device must be worn towards the opposite side of the curvature. A period
of use of 6-8 months is advisable to correct 70% of the curvature. It is
recommended to use the standard mode (8 hours a day).
PEYRONIE’S DISEASE:
See “correcting penile curvature”. It is advisable to use the Quick Extender
Pro™ in conjunction with the treatment advised by your physician. Please
note that the Quick Extender Pro™ will only correct curvature of the penis
and is not a substitute for the medication prescribed by your physician.
SURGICAL LENGHTHENING OF THE PENIS:
Follow your doctor’s instructions and start using the device 4 or 6 weeks
after the surgical intervention or as your doctor recommends. Use the
standard mode.
Order Quick Extender Pro; https://geni.us/quickextenderpro
16 | P a g e
18. Precautions Chapter 10
Do not use if you have taken drugs or alcohol in excess, DO NOT USE while
doing hard labor, exercise or while playing any kind of sport. Remove the
device to defecate or urinate.
If you experience pain or discomfort, bluish discoloration or numbness of the
glans, remove the device and massage the penis. By doing so the penis color
will return to normal and the unpleasant sensations will cease.
If you feel discomfort at the base of the glans, you must wear cotton or gauze
to protect this sensitive area.
In case of sudden erection, do not worry since it is quite normal, remove the
device and reapply it when the erection subsides. When you take off the
device you may notice a tingling sensation for which you should not worry. It
is due to the tissues relaxing after a period of tension.
It is normal to feel mild discomfort after a period of 2 hours. Do not worry,
this is the indication that the tissues need to be relaxed. Take off the device
and massage the glans and shaft of your penis for a period of two minutes.
Then wear the device again.
Order Quick Extender Pro; https://geni.us/quickextenderpro
17 | P a g e
19. Some days you may feel more uncomfortable than others. Do not worry, keep
using the device. If you see little white areas on the glans do not worry either.
These are areas of edema or fluid retention, caused by the silicone loop being
too tight. Massage the area and they will disappear.
If you have a wound or an ulcer, or you suffer from a venereal disease, DO
NOTUSE THE DEVICE until it has healed completely.
If you develop white wounds on your glans, it is necessary to see a doctor,
since you may have developed a fungal infection.
Order Quick Extender Pro; https://geni.us/quickextenderpro
18 | P a g e
20. Ointments Chapter 11
You may want to use ointments during the course of your treatment. Here are
some of the recommended ointments:
ANTI-IRRITATION OINTMENT:
You can have it prepared by your pharmacist or purchase it already made.
You can use Neosporin, Bacitracion, Blastostimuline or any similar ointments.
-In case of irritation apply ointment during the evening and use the device
during the day.
-In case of persistent irritation: contact your physician.
HEALING OINTMENT FOR WOUNDS:
If you develop a wound or and ulcer: do not use the device for 4 days. The first
2 days use Neosporin 3 times a day the twice for the reaming 2 days.
ANTI-INFLAMMATORY CREAM:
If you develop a marked inflammation at the base of the penis or pubic area,
apply an anti-inflammatory cream.
HYDRATING CREAM:
If you feel discomfort in the shaft of the penis, massage your penis with
hydrating cream for 5 minutes in the evening.
Order Quick Extender Pro; https://geni.us/quickextenderpro
19 | P a g e
21. Progress Chart Chapter 12
Month Month Erection Flaccid Erection Flaccid
Name Length Length Circumference Circumference
0
1
2
3
4
5
6
7
8
9
10
11
12
At month 0 insert your initial size so that you may track your progress. You
may use this graph as a reference.
Order Quick Extender Pro; https://geni.us/quickextenderpro
20 | P a g e