The benefits of PteK RCHF3 PteK RCHF3 charger is the faster and safer method to recharge batteries in 2 hours. In fact you do not need any dedicated battery room any more, you also can avoid all the relative maintenance problems and the time recovery, this means less costs for maintenance and infrastructures and less battery packs. Excellent also with batteries having a big capacity you can quickly charge in short time, as during the lunch time or when the vehicle is in standby. so you don’t have to replace batteries in order to increase the work time. The three-phase PteK RCHF is realized with full switching technology with microcontroller digital control, it is a flexible and reliable devices. The high efficiency assures a remarkable energy saving optimizing the economic benefits permitting to amortize the investment for the high frequency choice in a short time. It is also suitable for recharge all kind of batteries (leadacid gel, sealed, AGM batteries, etc…) and allow selecting a specific charge curve or configuring easily a suitable curve for the type of battery. PteK RCHF is characterized by a negligible residual output ripple, it also integrate the input and output protections and is equipped with an over-temperature control both on the primary side and the secondary side of the converter. With a wholly programmable control unit, easy-to-use with the user-friendly graphic interface displaying all the parameters, historical data of the charge cycles executed, alarms, data plate and all general information concerning the device. The interface also allows setting all the charge parameters, selecting the charge curves, setting the clock and activating all the optional functions. PteK RCHF is equipped with a monochromatic graphic LCD display of 64x128 pixels. The control unit can be connect it to a personal computer. An interface software for PC is available permitting a whole configuration of the PteK RCHF, in order to check and monitor all the functions in real time. The software is equipped with a specific tool for the charge curve configuration and customization. Input Voltage: 400 Vca ± 15% three-phase, input Frequency: 50 – 60 Hz, efficiency: ~ 90%, operating temperature: – 20 to + 50 °C, current drawn by the Battery: 0 A, if network electrically bonded, protection against Output Short-circuit, protection against polarity reversal, thermal Protection Semi-conductors, input Protection, charge curve: programming and settings, displaying and messages with monochromatic graphic LCD display, thermal compensation with optional probe, ventilation with forced air circulation, metallic body with these dimensions: 830 x 500 x 500 mm, protection IP20, in conformity with the Low Voltage directive 73/23/ CEE and the EMC and directive 89/336/CEE and their successive amendments.

1. Ptek RCHF
I vantaggi di PteK RCHF3
PteK RCHF3 è veloce e sicuro per ricaricare in sole 2 ore, riduzione del numero di batterie,
erelativizonadiricarica,riduzionesignificativacostiperlasostituzioneemanutenzione.
Riduzione gas acidi negli ambienti di ricarica.
Permette di recuperare tempo e riduce la quantità di batterie necessarie, quindi
minor costi di infrastrutture e manutenzione, carica anche batterie di grosse capacità
in brevissimo tempo (es: durante la pausa pranzo o con veicolo in standby).
Le batterie non dovranno più essere sostituite per aumentare il tempo di lavoro.
PteK RCHF3 ha un controllo digitale con microcontrollore quindi versatile ed affidabile.
Il grado di efficienza garantisce un importante risparmio energetico con realtivi
risparmi economici, permette di conseguenza di ammortizzare in tempi brevi
l’investimento dell’alta
frequenza.
Idoneo per ricarica di tutti i tipi di batterie (piombo acido, gel,
ermetiche, AGM, etc…) sono configurabili per specifiche curve
di carica o di impostarne velocemente una idonea al tipo di
batteria.
Contraddistinto da un ripple di uscita residuo trascurabile,
integrano protezioni di ingresso e di uscita e sono dotati di
controllo sovratemperatura sia sul lato primario che quello
secondario del convertitore.
É presente anche un unità di controllo programmabile e di facile
utilizzo grazie al display grafico user-friendly, consente anche
la visualizzazione dei parametri di carica, dei dati storici dei
cicli eseguiti, degli allarmi, dei dati di targa e delle informazioni
generiche del PteK RCHF3.
Consente anche l’impostazione dei parametri di carica,
selezione curve, impostazione dell’orologio e funzioni opzionali.
Display tipo LCD grafico monocromatico 64x128 pixel.
PteK RCHF3 permette di comunicare tramite USB standard con
un personal computer.
Il software di interfaccia consente la completa configurazione
del caricabatteria, il controllo e il monitor in tempo reale di
tutte le funzionalità.
Permette attraverso uno specifico “tool” la configurazione e la
personalizzazione delle curve di carica.
The benefits of PteK RCHF3
PteK RCHF3 charger is the faster and safer method to recharge batteries in 2 hours.
In fact you do not need any dedicated battery room any more, you also can avoid
all the relative maintenance problems and the time recovery, this means less costs
for maintenance and infrastructures and less battery packs.
Excellent also with batteries having a big capacity you can quickly charge in short
time, as during the lunch time or when the vehicle is in standby.
so you don’t have to replace batteries in order to increase the work time.
The three-phase PteK RCHF is realized with full switching technology with
microcontroller digital control, it is a flexible and reliable devices.
The high efficiency assures a remarkable energy saving optimizing the economic
benefits permitting to amortize the investment for the high
frequency choice in a short time.
It is also suitable for recharge all kind of batteries (leadacid
gel, sealed, AGM batteries, etc…) and allow selecting a specific
charge curve or configuring easily a suitable curve for the type
of
battery.
PteK RCHF is characterized by a negligible residual output
ripple, it also integrate the input and output protections and
is equipped with an over-temperature control both on the
primary side and the secondary side of the converter.
With a wholly programmable control unit, easy-to-use with the
user-friendly graphic interface displaying all the parameters,
historical data of the charge cycles executed, alarms, data
plate and all general information concerning the device.
The interface also allows setting all the charge parameters,
selecting the charge curves, setting the clock and activating all
the optional functions.
PteK RCHF is equipped with a monochromatic graphic LCD
display of 64x128 pixels.
The control unit can be connect it to a personal computer.
An interface software for PC is available permitting a whole
configuration of the PteK RCHF, in order to check and monitor
all the functions in real time. The software is equipped
with a specific tool for the charge curve configuration and
customization.
PteK srl. - Via Tazio Nuvolari, 5 - 47843 - Misano Adriatico (RN) Phone/Fax: +39 0541 610 793 - info@ptek-hf.com
Modello PteK RCHF trifase Ptek RCHF model three phase

2. Ptek RCHF
tensione ingresso: 400 Vca ± 15%, trifase, frequenza ingresso: 50 – 60 Hz,
Rendimento: ~ 90%, temperatura funzionamento: da – 20 a + 50 °C, corrente
assorbita dalla batteria: 0 A, con rete collegata, protezione contro cortocircuito in
uscita: si, fusibile, protezione contro inversione polarità: si, fusibile, protezione termica
semiconduttori: si, protezione ingresso: si, fusibili, curva carica: programmabile e a
proprio piacimento, visualizzazione e letture: display LCD grafico monocromatico,
compensazione termica: si (con sonda opzionale), ventilazione forzata, contenitore
metallico con dimensioni: 830 x 500 x 500 mm, protezione IP20, conforme ai requisiti
della Direttiva Bassa Tensione 73/23/CEE e della direttiva EMC 89/336/CEE e loro
successive modificazioni.
Input Voltage: 400 Vca ± 15% three-phase, input Frequency: 50 – 60 Hz,
efficiency: ~ 90%, operating temperature: – 20 to + 50 °C, current drawn by the
Battery: 0 A, if network electrically bonded, protection against Output Short-circuit,
protection against polarity reversal, thermal Protection Semi-conductors, input
Protection, charge curve: programming and settings, displaying and messages with
monochromatic graphic LCD display, thermal compensation with optional probe,
ventilation with forced air circulation, metallic body with these dimensions: 830 x
500 x 500 mm, protection IP20, in conformity with the Low Voltage directive 73/23/
CEE and the EMC and directive 89/336/CEE and their successive amendments.
PteK srl. - Via Tazio Nuvolari, 5 - 47843 - Misano Adriatico (RN) Phone/Fax: +39 0541 610 793 - info@ptek-hf.com
Modello PteK RCHF trifase Ptek RCHF model three phase
RCHF
V
24 36 48 72 80 96
A
200A 200A 200A 200A 200A 200A
300A 300A 300A 300A 300A 300A
400A 400A 400A
500A 500A 500A
600A 600A 600A
U
U
I
t
U I
t
Iua IuIa
Tensione/Voltage
Spannung/Tension
Corrente/Current
Storm/Courant
I
Tensione/Voltage
Spannung/Tension
Corrente/Current
Storm/Courant
U
U
I
t
U I
t
Iua IuIa
Tensione/Voltage
Spannung/Tension
Corrente/Current
Storm/Courant
I
Tensione/Voltage
Spannung/Tension
Corrente/Current
Storm/Courant
Altre curve su richiesta
Available curve on request
Conformità alle direttive 89/336/CEE e
72/23/CEE e marcatura .
Conformity to the directives 89/336/
CEE and 72/23/CEE . marking