 PROFIBUS is a very reliable and cost effective technology.  It is common to find extensive installations comprising thousands of PROFIBUS devices operating on complex networks which are connected together via industrial Ethernet.  The reliable operation of these networks is essential to maintaining plant productivity.  So, what can go wrong? And how do you find out? And avoid recurrance?

1. PROFIBUS Network Health
Checking and Monitoring
Andy Verwer
Verwer Training & Consultancy Ltd
and Dave Tomlin, Hitex UK
Page 2Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
 PROFIBUS is a very reliable and cost effective
technology.
 It is common to find extensive installations
comprising thousands of PROFIBUS devices
operating on complex networks which are connected
together via industrial Ethernet.
 The reliable operation of these networks is essential
to maintaining plant productivity.
 So, what can go wrong?
PROFIBUS

2. Page 3Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
PROFIBUS DP
PROFIBUS DP PROFIBUS PA
Ethernet
HMI
PLC
PC
PSU Instrument or
I/O failure
Number 1 (90%)
Wiring faults:
Reflections, Wire breaks,
Short circuits, connector
corrosion etc.
Number 2 (5%)
Interference pickup.
Particularly on drives and
servos.
Power
supply
failure.
The Most Common Netwok
Problems
Software
problems
Page 4Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
 Quite often users are unaware that their system has
communication errors because the robustness of
PROFIBUS can hide these faults.
Green light
– all must
be ok!
 Only when the rate of data corruption reaches a
critical threshold will the fault become visible.
But by then it is too late!
Communication faults

3. Page 5Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
 Permanent faults are relatively easy to fix.
 Because the fault disappears when we've fixed it!
 Intermittent faults can be a nightmare!
 Because we cannot be sure that we have fixed it.
 We may seem to have cured the problem, but then it
comes back again later!
 Intermittent faults require long-term monitoring to
check that the fault is cured.
 Statistical reporting over an extended period can be
useful.
Intermittent Faults
Page 6Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
Bus analysers
 An analyser is an essential tool for fault-finding,
monitoring, health-checking networks.
 An analyser shows us what is going on inside a
network.
 Most modern analysers incorporate waveform
visualisation in order to help diagnose problems at
the physical level (i.e. cables and connectors).
 PROFIBUS is very robust and will continue to
operate in the presence of occasional errors.
However, statistical measures of network
performance can help you see how close you are to
the “cliff edge”.

4. Page 7Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
PROFIBUS analysers
 PROFIBUS analysers are available from many suppliers:
Page 8Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
ProfiTrace

5. Page 9Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
 Health checking is an important part of the
commissioning and maintenance strategy for your plant.
 The health check will help to find non-critical and
intermittent faults that are not obvious.
 A health check should be carried out immediately after
commissioning. We also strongly recommend repeating
the health check at intervals.
 How much better to integrate the health checking tools
into the network?
 To give permanent monitoring of system health.
 Automatically report failures.
 Give pre-warning of impending failures and performance
degradation.
System Health Checking
Page 10Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
Softing
PROFINET
monitor
Permanent monitoring tools
 A number of new tools have appeared on the market
which are designed to be permanently connected to
the network to provide 24/7 network monitoring.
Softing PB Monitor
DP network monitor
Procentec COMbricks
network monitor
(multiple networks and
segments, DP and PA)

6. Page 11Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
COMbricks
 COMbricks is a modular repeater and gateway system from
Procentec with built-in ProfiTrace functionality accessible over
Ethernet.
 COMbricks provides:
 Networking,
• PROFIBUS, PROFINET,
Ethernet, copper and fibre-optic.
 Monitoring
• ProfiTrace OE built-in and
accessible over Ethernet (web
based).
 Control
• Remote IO capability allowing low
cost control and plant monitoring
over the network.
Page 12Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
Head Station
with
ProfiTrace
built in
Repeater
modules with
optional
‘scope and
redundancy
PROFIBUS
DP slave
modules
IO modules
digital,
relay,
analogue
etc
PROFINET
IO device
modules
Optical link
modules
(1 or 2
channel)
mix and match to produce the required functionality
The Modules available include:
PA module
Coupler
and/or MBP
monitor
with ‘scope
COMbricks

7. Page 13Monitoring & Preventative Maintenance, Verwer Training & Consultancy Ltd, February 2014
Head
Station
Profitrace - built
in to head station.
Can monitor all 4
segments over
Ethernet.
Ethernet
Each of the four
segments can have
up to 31 devices
connected.
But each channel can
be connected to a
separate network if
desired allowing up
to 4 networks to be
monitored
simultaneously
2 chan.
repeater
4 channel Repeater and
Network Monitor
Agenda
Basics
Use Cases
Scenarios
Agenda
Types of
Diagnosis
Network
Diagnosis
Stationary
Network
Diagnosis for
PROFINET
with
PN-Monitor
Summary
Agenda
Types of
Diagnosis
Network
Diagnosis
Stationary
Network
Diagnosis for
PROFINET
with
PN-Monitor
Summary
14
Peter Jüngling/ Quality Assurance in PROFINET Networks by Stationary Diagnosis
Stationary Diagnosis with PN-Monitor
Features:
• Permanent passive monitoring of the
network avoids un-scheduled downtimes
• Web-based system overview displays all
relevant parameters at a glance
• Generates alarms based on characteristic
events
• Snapshots of frames can be saved
to find out about the event’s reason
• Access to diagnosis data via SNMP
SOFTING proudly present:
PROFINET-Monitor
• Indicates failures before they stop your network
• The perfect tool for preventive maintenance
NEW !

8. Agenda
Basics
Use Cases
Scenarios
Agenda
Types of
Diagnosis
Network
Diagnosis
Stationary
Network
Diagnosis for
PROFINET
with
PN-Monitor
Summary
Agenda
Types of
Diagnosis
Network
Diagnosis
Stationary
Network
Diagnosis for
PROFINET
with
PN-Monitor
Summary
15
Peter Jüngling/ Quality Assurance in PROFINET Networks by Stationary Diagnosis
Stationary Diagnosis with PN-Monitor
• PN-Monitor should be inserted between PLC (Controller)
and first Field Device
 All frames exchanged between Controller and
Device are visible from there
• PN-Monitor does not disturb data exchange!
Frames can pass through PN-Monitor even in powerless
operation mode
How to integrate PN-Monitor in your network?
PN-Monitor
PLC