This document provides information on Prismaplus XT bridges and gantries. It describes the drive system which uses twin cam gears for self-centering and proper mechanical alignment. It also details the divider and joint which includes stainless steel ball bearings to prevent heavy loads on the mechanism. Additionally, it discusses the slide up and slide down posting systems which allow for time saving and cost efficient posting of non-adhesive vinyl or printed and cut paper posters. The controller allows for adjustable pause times and sign alignment. Safety clips and a quick mount installation system are also optional additions.

1. Prismaplus XT : Bridges & Gantries

2. Bridges & Gantries Designed to attractand to keep the attention of it’s viewer

4. Createcustomized design

6. Bridges & Gantries

7. Drive system Reliability defined Twin cam gear- self centering and mechanically locking Cog grip bevel gear- smoother turn of the prism and proper mechanical alignment Direct drive with safety clutch Built in mechanical pause (2,5-3 sec)

8. Drive system Turning of the drive system

10. Joint includes SS ballbearing

11. Prevent heavy load on mechanism

12. For easier handling of prisms

14. Slide down posting system

16. Non-adhesive vinyl on trivisions

17. Print of rigid vinyl and cut into strips

20. Set the sign to turn two faces only

21. Stop sign correctly aligned during posting

23. Slidedownsafety clips Optional Safety clips for slidedown system – 2 in 1- Extra safety to lock prisms in sign - Easier for slidedownposting Safety clips. Easy to attach! Pictureeasily falls in place from the top Prismsalways in place

26. Quick Mount Installation System Optional Prismaflex installation Sign arrivespacked for shipping Parts in completesign Sign lifted in place

27. Quick Mount Installation System Optional Installprisms, connect the power and it’sready to use!

29. Low energy consumption

30. 2. Poster made out of pure PVC for easy recycling

31. No adhesive or glue in substrate