Get significantly better transactional database performance for less with value SAS and data center NVMe SSDs from Toshiba Memory
1. Get significantly better transactional
database performance for less with
value SAS and data center NVMe SSDs
from Toshiba Memory
Value SAS and data center NVMe SSDs achieved
better transactional database performance at a lower
cost vs. enterprise SATA SSDs
Dell EMC PowerEdge R740xd server running a transactional
database workload
For years, businesses looking for lower-cost, flash-level performance have defaulted to
SATA SSDs. But with SATA SSD connection speeds limited to 6Gb/s, businesses are
increasingly seeking cost-effective ways to improve performance. Now Toshiba Memory
has introduced the RM5 Series value SAS SSDs and CD5 Series data center NVMe™
SSDs, both of which offer faster transfer speeds than SATA SSDs. Together with the
Dell EMC™
PowerEdge™
R740xd server we tested, these drives from Toshiba Memory
also provided a better performance-to-cost ratio than the SATA SSDs we tested.1
We configured a Dell EMC PowerEdge R740xd server with three types of drives:
enterprise SATA SSDs, value SAS SSDs, and data center NVMe SSDs. Using a read-
intensive transactional database workload, we tested the drives. The value SAS
drive configuration boosted transactions per second (TPS) by up to 71 percent
over the configuration with enterprise SATA drives. Data center NVMe drives
pushed performance even further, delivering up to 115 percent more TPS than
the SATA‑based configuration. We also found that value SAS and data center
NVMe drives delivered, respectively, up to 73 percent and 109 percent better
transactional database performance per dollar than enterprise SATA drives.
With value SAS and data center NVMe SSDs from Toshiba Memory, your
business might not have to choose between performance and affordability.
Welcome to life after SATA.
Up to 71% more
transactions
per second
Value SAS SSDs
vs. enterprise SATA SSDs
Up to 115% more
transactions
per second
Data center NVMe SSDs
vs. enterprise SATA SSDs
Up to 109% more
transactions per second
for every dollar
Data center NVMe SSDs
vs. enterprise SATA SSDs
Speed up your
transactional database
performance
Get better
performance
for less
Get significantly better transactional database performance for less with value SAS and data center NVMe SSDs from Toshiba Memory April 2019
A Principled Technologies report: Hands-on testing. Real-world results.
2. How do value SAS and data center NVMe SSDs compare to
SATA SSDs?
Consider the loyal manual car buyer. Twenty years ago, driving a stick shift made sense: manual cars were often
cheaper and got better gas mileage. But now that automatic car technology has caught up, manual car sales are
dwindling.2
When looking for a new car, the manual car driver might catch themselves eyeing an automatic that’s
just as affordable, with superior gas mileage to boot. They might start to wonder: Am I limiting myself with a
technology that could become obsolete?
Data center technology evolves even more rapidly. What made sense
financially five years ago or even two years ago may no longer be the
best option today. Take SATA SSDs, which have had the same transfer
speeds of 6Gb/s since 2008.3
RM5 Series value SAS SSDs deliver a 12Gb/s connection,4
and
CD5 Series data center NVMe SSDs push transfer speeds to 32
gigatransfers per second (GT/s).5
In our testing, both drives
from Toshiba Memory delivered better transactional database
performance per dollar than the enterprise SATA SSDs we tested.6
SATA SSDs may have served your business well in the past. But your
needs have changed, and so has data center technology. Like the
manual car owner switching to automatic, it’s time to consider what
lies beyond SATA.
About the Dell EMC
PowerEdge R740xd
The Dell EMC PowerEdge R740xd
offers strong database performance
with a variety of storage
configuration options, and can
support up to 24 SATA, SAS, or
NVMe drives.7
RM5 Series value SAS SSD from Toshiba Memory
Get significantly better transactional database performance for less with value SAS and data center NVMe SSDs from Toshiba Memory April 2019 | 2
3. Taking the drives for a test run
We wanted to learn about the performance improvements companies
could experience by configuring new servers with new drives from Toshiba
Memory versus enterprise SATA drives. We tested a single-node Dell EMC
PowerEdge R740xd server with three different SSD types:
• Intel®
D3-S4510 SATA SSDs (RAID 10 and no RAID)
• RM5 Series value SAS SSDs (RAID 10 and no RAID)
• CD5 Series data center NVMe SSDs (no RAID)
On each, we ran a read-intensive transactional database workload
from Benchmark Factory for Databases®
8.0.1, which simulated
purchases and sales at a brokerage firm. We tested the configurations
with enterprise SATA and value SAS SSDs with hardware RAID 10 enabled.
For the configuration with data center NVMe SSDs, we did not use
hardware RAID because it is not available for NVMe drives in the current test
configuration. (For more details about this approach, see Comparing apples
to apples on page 5.)
What we learned
The charts below show the results of our testing. With RAID 10 enabled on the enterprise SATA and value SAS
SSDs, the Dell EMC PowerEdge R740xd server configured with SATA SSDs achieved 2,779 database transactions
per second. The server configured with value SAS SSDs from Toshiba Memory boosted that number of transactions
to 4,771, a performance improvement of 71 percent. The Dell EMC PowerEdge R740xd server configured with data
center NVMe SSDs, meanwhile, produced 5,987 transactions per second—115 percent more than the configuration
with enterprise SATA SSDs. With RM5 Series value SAS and CD5 Series data center NVMe SSDs, your business
could run far more transactions per second, letting you serve more customers on the same server.
Total transactions per second higher is better
RM5 Series value SAS SSDs
4,771
2,779
Enterprise SATA SSDs
Up to
71%
more
transactions
About Benchmark Factory
for Databases
According to Quest software,
Benchmark Factory allows you to
“easily conduct database workload
capture and replay, industry-standard
benchmark testing and scalability
testing.”8
For more information
about Benchmark Factory for
Databases, visit
https://www.quest.com/products/
benchmark-factory/.
CD5 Series data center NVMe SSDs (no RAID)
5,987
Enterprise SATA SSDs
Up to
115%
more
transactions
2,779
Total transactions per second higher is better
Get significantly better transactional database performance for less with value SAS and data center NVMe SSDs from Toshiba Memory April 2019 | 3
4. Comparing apples to apples
RAID 10 (Redundant Array of Independent Disks) technology helps protect data by writing multiple copies of the
same data on different drives. The extra work data redundancy requires ties up some of the available performance
capabilities of the drives. To reflect real-world configurations, we used hardware RAID 10 for both the enterprise
SATA SSDs and the RM5 Series value SAS SSDs. The CD5 Series data center NVMe SSDs ran without hardware
RAID because it is not available for NVMe drives in the current test configuration.
To explore the performance of the enterprise SATA and value SAS drives without RAID, we conducted the tests
a second time without using a RAID configuration for any of the drives. In the chart below, the lower two blue-
shaded bars represent these additional data points. The SATA drive performance improved but fell well short of
that achieved by the RM5 Series value SAS and CD5 Series data center NVMe SSDs.
Despite the fact that our server used top-of-line processors, our transactional database workload running on
value SAS and data center NVMe SSDs without RAID fully utilized the CPUs before we hit the performance
ceiling of these drives. This explains why the performance of the two drives without RAID is so similar. Unlike the
enterprise SATA SSDs, RM5 Series value SAS and CD5 Series data center NVMe storage options can help fully
utilize the compute potential of each server.
Total transactions per second
CD5 Series data center NVMe SSDs
5,987
RM5 Series value SAS SSDs
5,872
4,771
Enterprise SATA SSDs
4,453
2,779
higher is better No RAID RAID 10
Get significantly better transactional database performance for less with value SAS and data center NVMe SSDs from Toshiba Memory April 2019 | 4
5. Value SAS and data center NVMe SSDs provided better
transactional database performance per dollar
To calculate performance per dollar, we divided the total TPS by the total solution cost of each configuration.
(For more information on how we arrived at our cost analysis results, see the science behind the report.) With
RAID 10 enabled on the SATA and SAS SSDs, the Dell EMC PowerEdge R740xd server with RM5 Series SAS
SSDs provided 0.1150 TPS per dollar, whereas the configuration with enterprise SATA SSDs delivered 0.0663 TPS
per dollar—meaning the configuration with value SAS SSDs produced 73 percent more TPS per dollar.
CD5 Series data center NVMe SSDs increased value for money even further, delivering 109 percent more TPS
per dollar than the RAID-enabled enterprise SATA SSDs we tested. Without RAID enabled on the SATA and SAS
SSDs, RM5 Series value SAS SSDs and data center NVMe SSDs still delivered 33 percent and 30 percent better
performance per dollar, respectively. For both of these configurations, a fully utilized CPU impacted the TPS-per-
dollar metrics (as we explain in more detail on page 4). However, both the value SAS and data center NVMe SSD
configurations demonstrated significant potential performance-per-dollar savings compared to the enterprise
SATA drives we tested.
System Percent win
vs. Dell EMC PowerEdge R740xd with enterprise SATA SSDs (RAID)
Dell EMC PowerEdge R740xd with RM5 Series value SAS SSDs (RAID) 73.45%
Dell EMC PowerEdge R740xd with CD5 Series data center NVMe SSDs (no RAID) 109.50%
vs. Dell EMC PowerEdge R740xd with enterprise SATA SSDs (no RAID)
Dell EMC PowerEdge R740xd with RM5 Series value SAS SSDs (no RAID) 33.11%
Dell EMC PowerEdge R740xd with CD5 Series data center NVMe SSDs (no RAID) 30.66%
TPS per dollar
System with RM5 Series value SAS SSDs
0.1150
0.0663
System with enterprise SATA SSDs
Up to
73%
more TPS
per dollar
higher is better
TPS per dollar
System with CD5 Series data center NVMe SSDs
0.1389
System with enterprise SATA SSDs
Up to
109%
more TPS
per dollar
higher is better
0.0663
Get significantly better transactional database performance for less with value SAS and data center NVMe SSDs from Toshiba Memory April 2019 | 5
6. Conclusion: Serve more customers and get more transactional
database performance per dollar
No one wants to be forced to choose between performance and cost when upgrading their flash storage. With
RM5 Series value SAS and CD5 Series data center NVMe SSDs, you might not have to.
In our hands-on testing, a Dell EMC PowerEdge R740xd server with value SAS SSDs outperformed the same
server with enterprise SATA SSDs. Data center NVMe SSDs boosted performance even further. In addition, the
Toshiba Memory drives we tested delivered more transactional database performance per dollar than enterprise
SATA SSDs. If your business is asking, “What does life after SATA look like?”, value SAS and data center NVMe
SSDs from Toshiba Memory provide an answer.
______
1 See our cost comparison results on page 4. According to our testing, RM5 Series value SAS and CD5 Series data center NVMe SSDs
delivered, respectively, 73 percent and 109 percent better transactional database performance per dollar than the enterprise SATA SSDs
we tested.
2 Eric Evarts, “Why Are Manual Transmissions Disappearing?”, accessed March 22, 2019,
https://cars.usnews.com/cars-trucks/best-cars-blog/2016/09/why-are-manual-transmissions-disappearing.
3 The Serial ATA International Organization (SATA-IO), which describes itself as “an independent, non-profit organization developed by
and for leading industry companies” (“About SATA-IO,” accessed April 5, 2019, https://sata-io.org/about-sata-io), last announced a dou-
bling of maximum transfer speeds on SATA (from 3Gp/s to 6Gp/s) in August 2008. “New SATA Spec Will Double Data Transfer Speeds to
6 Gb/s,” accessed April 5, 2019, https://sata-io.org/system/files/member-downloads/SATA_6Gb_Phy_PR_Finalv2.pdf.
4 Toshiba Memory, “Toshiba Memory America First to Deliver Value SAS SSDs Targeting SATA Applications,” accessed March 22, 2019,
https://business.toshiba-memory.com/en-us/company/tma/news/2018/06/storage-20180619-1.html.
5 Toshiba Memory, “Data Center SSD,” accessed March 22, 2019, https://business.toshiba-memory.com/en-emea/product/storage-prod-
ucts/da-ta-center-ssd/cd5.html.
6 Citation T/K, dependent on results of PT cost analysis.
7 Dell EMC, “Dell EMC R740xd spec sheet,” accessed January 23, 2019, http://i.dell.com/sites/doccontent/shared-content/data-sheets/
en/Documents/poweredge-r740xd-spec-sheet.pdf?newtab=true.
8 Benchmark Factory for Databases, accessed March 11, 2019, https://www.quest.com/products/benchmark-factory/.
Get significantly better transactional database performance for less with value SAS and data center NVMe SSDs from Toshiba Memory April 2019 | 6
Principled Technologies is a registered trademark of Principled Technologies, Inc.
All other product names are the trademarks of their respective owners.
For additional information, review the science behind this report.
Principled
Technologies®
Facts matter.®Principled
Technologies®
Facts matter.®
This project was commissioned by Toshiba Memory America, Inc.
Read the science behind this report at http://facts.pt/spn6onk