2. THE PNEUMATIC
SOLUTION
FOR IS MACHINESUV SERIES VACUUM PUMPS
A SERIES AIR COMPRESSORS
simple, reliable, durable
Direct coupling means few moving parts,
low rotation speed, low temperature.
This virtually eliminates repairs and ensures
superior reliability and longevity.
easy to install and run
Ready-to-use turnkey system with
optional Variable Speed drive and
heat recovery. No foundation or water
needed. Compact footprint.
tested & proven worldwide
In operation at Allied, Ardagh, Canpack,
Consol, Gallo, Gerresheimer, HNGI, O-I,
Șișecam, Verallia, Vidrala Wiegand and more.
low cost of operation
Low maintenance, negligible repairs, high
energy savings, and high reliability make
this the least costly long-term solution
available today. Typical ROI when repla-
cing other systems is 12-18 months.
first class support
Each unit comes with system engineering
and a 5-year performance guarantee.
Service by Pneumofore-certified techni-
cians is available anytime.
Dozens of leading glass plants
have chosen Pneumofore rotary
vane units over liquid ring or
screw pumps. The results are
crystal clear: high energy savings,
steady, trouble-free performance,
and of course, slashed costs of
operation - over decades.
visit pneumofore.com
FOR NEWS & TRADE SHOW INFO
The Importance of Vacuum on IS Machines
The Yantai Changyu Glass facility in the Shandong Province is of medium size,
extremely accurate in company choices, seen from the ordered set up, the
cleanness indoor and the care for machine selection. The improvement on the IS
machines could be clearly measured: running vacuum on a 8 section DG line for
750 ml wine bottle result in the increased IS machine speed by 10% and the reduce
bottle weight by another10%.
Innovative Pumps Control Solutions
The systematic replacement of water cooled pumps with Pneumofore UV50 units
at HNG involved in 2012 the Naidupeta and Nashik plants, where a new logic was
installed, combined with a Variable Speed drive and an Eternet card for each
vacuum pump.
Vacuum Improvement at SGD
Saint-Gobain Desjonquères has a plant in Sucy en Brie, in France, specialized in
hollow glass containers for the cosmetic and pharmaceutical industry. For 7 IS
lines with the total of 52 sections, the previous vacuum system investment,
motivated by low purchasing prices, failed due to the inadequate choice for the
continuous, heavy duty operation required in glassworks. In 2011 the vacuum
level was improved with 1 x UV30 VS55 vacuum pump of Pneumofore.
Vacuum for Wiegand and for Nampak
In June 2004 the first Pneumofore vacuum pumps were installed at Wiegand Glas
GmbH in Steinbach and in Grossbreitenbach, Germany. Several air cooled UV
pumps replaced successfully old, water-cooled units. The good results in Germany
motivated the installation of UV pumps also at Nampak Wiegand Glass in South
Africa.
Vacuum Installation without Service Center
The IS machines of our customer were upgraded for moulding with vacuum in
2003. Despite the lack of a local service center, the control and maintenance was
easily covered by the customer himself. The simple and reliable design of UV
pumps resulted in the trouble-free operation, 7 years long, until the factory was
heavily enlarged in 2010.
UV50 - UV16
VACUUM PUMP
A35 - A90
AIR COMPRESSOR
A SERIES FULL RANGE:67-5120 m3/h
UV SERIES FULL RANGE: 250-6480 m3/h
5
+
+