Afrapportering fra arbejdsgruppen & Introduktion til diisocyanat restriktionsprocessen v. Thomas Brønnum

1. PUR-sektionens arbejdsgruppe
for PUR-uddannelserne
Afrapportering fra arbejdsgruppen
Introduktion til diisocyanat restriktionsprocessen
Thomas Brønnum
Rådgivende ingeniør

2. Arbejdsgruppen for PUR-
uddannelserne
• Gunhild Christensen, Dan-Foam ApS
• Lars Månsson, Dan-Foam ApS
• Jimmy Storbank, Thyregod Bygningsindustri A/S
• Chris Ungermand, Huntsman Nordic Polyurethanes
• Peter Kjærsgaard Kristensen, Den Jyske Haandværkerskole
• Rasmus Grusgaard, Plastindustrien
• Thomas Brønnum, Bronnum Consulting Engineer

3. Fokusområder
• At sikre en højkvalitets- PUR-sikkerhedsuddannelse
(håndtering af isocyanater) alle de steder, hvor uddannelsen
udbydesudbydes
• At sikre mulighed for plastmageruddannelse hvor PUR
indgår (som en del af hærdeplastområdet på DJH)
• At sikre at tekniske PUR uddannelser f.ex operatør
uddannelser kan udbydes, når der er behov herfor

4. Aktiviteter i 2016/2017
• Møde med Industriens Uddannelser (IU) (sep. 2016)
• Arbejdsgruppemøde (sep. 2016)
• Møde med Dansk Industri (DI) (nov. 2016)
• Arbejdsgruppemøde og møde med DI (feb. 2017)
• Møde med ISOPA (marts 2017) (RG og ThB)
• Møde med ISOPA, DI og PD (maj 2017) (RG og ThB)
• Løbende dialog med IU (RG)
• Løbende deltagelse i Europurs WG Plant and Workers
Issues, herunder REACH restriktionsprojektet (ThB)

5. Obligatoriske PUR
uddannelser
• Den danske ’model’ og Arbejdsmiljørådets anbefalinger efter
Siemens og Vestas sagerne
• REACH restriktionsforslaget vedrørende diisocyanater og
nye sikkerhedsuddannelser (Appendix 13 Trainings andnye sikkerhedsuddannelser (Appendix 13 Trainings and
Measures to the future Annex XVII entry)
• Sammenligning af de to uddannelser (arbejdsgruppen)

6. Diisocyanates & REACH
(ISOPAS e book)
• Diisocyanates have been subject to regulatory
processes in Poland, Estonia and Germany since 2012
• Evaluation led by Poland and Estonia• Evaluation led by Poland and Estonia
• Both TDI and MDI have been added to the ECHA Community rolling action plan
(CoRAP). TDI was evaluated in 2013 by the Polish Competent Authority which
concluded that no regulatory action was needed. On the other hand, MDI has been
under evaluation in Estonia since 2013.

7. Diisocyanates & REACH
(ISOPAS e book)
• Diisocyanates have been subject to regulatory
processes in Poland, Estonia and Germany since 2012
• Restriction led by Germany• Restriction led by Germany
• In October 2015, BAuA formally registered its intention to prepare a restriction
dossier. The dossier was formally sent to ECHA in October 2016 and is currently
undergoing compliance check. We expect the public consultation to start in March
2017.
• Public consultation on Annex XV RESTRICTION REPORT started on
22/03/2017

8. Public consultation/
offentlig høring

9. Public consultation/
offentlig høring
ANNEX XV RESTRICTION REPORT
PROPOSAL FOR A RESTRICTION
Appendix 8 Elements to be included into Appendix 13
Trainings and Measures to the future Annex XVII entry
Appendix 5 Additional material regarding Appendix
Exemptions and Appendix Trainings and Measures

10. Eksponering og målgrupper

11. Eksponeringsgrad
Appendix5AdditionalmaterialregardingAppendixExemptionsandAppendix
TrainingsandMeasures
Table 5-4: Exposure stages (expert judgement)
Route of Exposure Exposure Stage Probabilitv of Exposure
Dermal 1 Potential skin contact rare, small areas and
immediatelyappropriately removede,q,splashes
Dermal 1 Potential skin contact rare, small areas and
immediatelyappropriately removede,q,splashes
2 Potential repeated short term skin contact (max 4*15 min
per 8 hr shift)
3 Potential repeated prolonged skin contact (more than 60
min per 8 hr shift)
Inhalation 1 Low vapour formation
2 Moderate vapour and/or aerosol formation
3 Hiqh vapour and/or aerosol formation

12. Håndtering og målgrupper
Appendix8ElementstobeincludedintoAppendix13TrainingsandMeasurestothe
futureAnnexXVIIentry
Table 8-1: Generic uses and the corresponding "measures groups" - Industrial & professional
Activities
Inhalation
Exposure
Dermal
Exposure
Measures
group
Loading/Unloading Trucks 1 1 1
Pumping /Loading using closed systems 1 1 1
Application of Sealants and adhesives (including foam application from
cans)
1 1 1
Handling cold fibres and composite materials after manufacturing 1 1 1
Polyurethane operation with dedicated closed machinery, like foaming,Polyurethane operation with dedicated closed machinery, like foaming,
adhesives, sealants elastomers
1 1 1
Working in a laboratory 1 1 1
Handling open mixtures at ambient temp. (incl. foam tunnels) 2 2 2
Handling incompletely cured articles (e.a.
freshlv cured, still warm)
1 2 2
Spraying in a ventilated booth 2* 2 2
Application by roller 2 2 2
Application by brush 2 2 2
Application by dipping and pouring 2 2 2
Foundry applications 1 2 2
Mechanical post treatment (e.g. cutting) of not fully cured articles 1 2 2
Cleaning and waste 2 2 2
Maintenance and repair that needs access to equipment 2 2 2
Change Management 2 2 2
Open handling of warm or hot formulations (>45 C) 3 2 3
Spraying in open air, with limited or only natural ventilation (includes
large industry working halls) and spraying with high
energy (e.a. foams elastomers)
3 3 3

13. Tak for opmærksomheden!