Aviation Resume

1. PHILIP KRUEGER (Phone) 303-725-3142
17429 E Flora Place, Aurora, CO 80013 (E-Mail) kruegerphilip@yahoo.com
AVIATION SKILLS RESUME
A&P Mechanic and a Graduate with Honors. Specializing in Sheet Metal
Fabrication, Repairs, Alterations, Modifications and AC Systems Installations.
 Blue Print Reading
 Follow Detailed Drawings For Sheet
Metal / Mechanical Modifications &
Repairs
 Build Up Sheet Metal/ Mechanical,
Assembly’s And Installation of
Modifications for Med Conversions-
Bell 407, EC-130, A Star 350 and
Sikorsky S76D.
 Replacements of, Seat Tracks,
Leading Edge Replacements, Flap
Leading Edges, and Flap Vanes.
 Honeycomb, Fiberglass Repairs &
Vacuum Bagging
 C & D Check Sheet Metal Repairs
 Work With Engineering Drawings
and ECO”S
Professional Experience
Western Aero Repair -04/17 to present-
Overhaul 707 flight controls for the Navy’s E6 program,
Roll leading edge repairs, standard structural repairs, shrinking and stretching alum for repairs.
Light composite repairs.
Air Methods- 10/16 to 03/17- Structural repairs, fabrication of aluminum repair parts, lay out,
drill & install repairs thru riveting & blind fasteners installation, acid etch, alodine, prime &
paint parts, carbon fiber & fiberglass repairs w/ vacuum bagging. Work with engineering orders
& structural repair manuals. Perform AAIP inspections of airframes of EC-130, AS350 & Bell
407 helicopters.
Vestas Blades America
04/16 to 08/16 - Wind turbine blades, fiberglass layup, repairs, putty, sand blade to proper
contours, install blade tips and paint wear strip to leading edge of blade.
(Eaton Electrical contracting thru Aerotek)
09/15 to 03/16 Build up of electrical distribution units, read engineering
drawings, layout, assembly of electronic distribution units. Work in receiving and
stocking of parts.
United Rotorcraft (Contracting thru Launch Technical Workforce Solutions)
01/15 to 09/15 Structures, sheet metal and modifications tech.
Build Up, Assembly and Installations of sheet metal modifications and
mechanical assembly’s of new Bell 407’s, EC-135’s, EC-130’s, EC-145’
& Astar 350 helicopters into medivac configurations.
Reading of Engineering Drawings and working with Eco’s
Responsible to read drawings, apply them and install modifications with

2. little to no supervision.
Install all types of potted inserts into honeycomb airframe for anchoring.
Responsibilities:
Sheet metal modification and installations
Mechanical assemblies build up and installation
Use of engineering drawings, Eco’s and filing of Ecor’s for corrections to
Drawings.
Aeroturbine (Contracting thru Strom Aviation)
6/14 to 12/14 Structures, sheet metal and modifications tech.
B-757 Passenger to freighter mod. Drill and remove existing structural members.
Use of engineering drawings and blueprints to locate, layout, drill up, ream and
Install new modification structures and parts. Use of SRM for repairs, fabricate
doublers and triplers layout, drill and rivet/ hi lok into place repairs.
Sikorski Global Helicopters ( Contracting thru Aviation Personnel International)
1/14 to 5/14 Fabrication Tech/ Structures Tech.
 Read interpret and apply engineering drawings to aircraft. Install sheet
metal and mechanical kits and modifications. Repair damaged
honeycomb composite skins and vacuum bag. Repair and pull improperly
located holes in aircraft structure, fabricate and install sheet metal repairs,
drill, ream and installation of hi lok fasteners, blind rivets, solid rivets.
Aluminum shaping, bending, rolling, treatment prime and paint.
Experienced knowledge of the pertinent manuals and there applications
to mechanical and sheet metal applications for repair and modifications.
Work with manuals all aspects of references, parts ordering and
installation
AAR Indianapolis (Contracting thru Johnson Service Group)
2/13 to 9/13 Structures/ Sheet Metal Tech, A&P Mechanic
Achievements: MD-90s.
 Completion of United, Delta and Southwest Fam Courses
 Sheet Metal Repairs and Working on structures repairs.
 Corrosion Removal & Prevention
 Corrosion Resistant Treatments & Finish Coats
 Fabricate and Install Sheet Metal Repairs
Responsibilities:
 Read Engineering Drawings and some Blue Prints.
 All aspects of airframe repairs
 All aspects of sheet metal repairs
 Experienced knowledge of the pertinent manuals and there applications
to mechanical and sheet metal applications for repair and modifications.
Jet Tech ( Temp Sub Contractor)
12/7/12 – 1/2/13
Structures/ Sheet Metal Tech/ Fabrication of parts/ Parts Ordering/ A&P Mechanic
Achievements:
 Complete Installation of 2 Evaporator System 1 Condenser with complete

3. scope of Installation, thru Engineering Drawings and self engineered
fabrication of parts for installation to fit the airframe installed to Piper
Cheyenne 400ls.
 Structures Repairs
 Assist in avionics fabrication of shelves and mounting and modification of
area’s to allow interference free mounting areas for avionics mods.
 Some Sheet Metal Back Shop Work With Semi Complex Bending
 Corrosion Removal & Prevention
 Corrosion Resistant Treatments & Finish Coats
 Fabricate and Install Sheet Metal Repairs
Responsibilities:
 Read Engineering Drawings and some Blue Prints and Make Judgments
to there proper applications to modifications.
 All aspects of airframe repairs
 All aspects of sheet metal repairs
 Experienced knowledge of the pertinent manuals and there applications
to mechanical and sheet metal applications for repair and modifications.
 Work with manuals all aspects of references, parts ordering and
installation
AAR Oklahoma City, OK (Planetechs)
7/12 – 12/12
Structures/ Sheet Metal Tech
Achievements:
 Doublers and filler repairs
 Structures Repairs
 Working With REO’S, 337’s & EA’S
 Some Sheet Metal Back Shop Work With Semi Complex Bending
 Work From Blue Prints
 Corrosion Removal & Prevention
 Corrosion Resistant Treatments & Finish Coats
 Fabricate and Install Sheet Metal Repairs
 Doublers and filler repairs
 Pinnacle Air, Alaska Air and Mesaba Training. EWIS Training.
 Aircraft Frame Replacements & Repairs
 Corrosion Removal & Prevention
 Corrosion Resistant Treatments & Finish Coats
Responsibilities:
 Open and close aircraft
 All aspects of airframe repairs
 All aspects of sheet metal repairs
 Metal to fiberglass bonding
 Work with manuals all aspects of references, parts ordering and
installation

4. Air Methods – (Contractor Thru Volt-Denver, CO) Helicopter Modifications
10/03/11 to 07/02/12
Structures/ Sheet Metal Tech/ Modifications Tech-Products Division
Achievements:
 Build Up, Assembly and Installations of sheet metal modifications and
mechanical assembly’s of new Bell 407’s, EC-135’s, EC-145’ & ASTAR
350 helicopters into medivac configurations.
 Reading of Engineering Drawings and working with Eco’s
 Responsible to read drawings, apply them and install modifications with
little to no supervision.
 Install all types of potted inserts into honeycomb airframe for anchoring.
Responsibilities:
 Sheet metal modification and installations
 Mechanical assemblies build up and installation
 Use of engineering drawings, Eco’s and filing of Ecor’s for corrections to
drawings

5. SMART INC, Goodyear, Arizona
June 1997-November 1998
Structural Modification & Repair Technician-Contractor
Achievements:
 Complete Blue Print Schooling
Responsibilities:
 Work with blue prints and repair manuals, repair and perform structural
modifications to MD-11 and DC 10 aircraft for passenger to freighter
aircraft modification.
 Fabricate & Install belly skin
 Perform C Check Sheet metal Repairs
 Anodize Aluminum
 Primer and Paint Repairs
MAYO AVIATION, Englewood, CO
June 1996- June 1997
A&P Mechanic
Responsibilities:
 Morning Preflight Checks
 Scheduled Aircraft Maintenance Checks
 Sheet metal Repairs, Flight Control Rigging
 Engine Servicing and Installation
 Door Seal Seating Repairs & Rebuild Struts
 Lear Jet Cockpit Window Replacement and Scratch Repairs
STS AEROSTAFF SERVICES, Jenson Beach, FL
Varied 12/95 – 5/96
Structural Repair & Modification Technician- Contractor
Responsibilities:
 Structural Repairs
 Prime, Paint & Seal Repairs
 Fabricate and Install Baggage Bay Liners
 Follow Engineer Drawings For Sheet metal Repairs
CESSNA AIRCRAFT COMPANY, Wichita, KS
June 1990 – January 1994
A&P Mechanic Achievements:
 Cessna 500 Series Familiarization Schooling
Responsibilities:
 Perform Phase Inspections
 Complete Aircraft Maintenance
 Engine Changes & Service
 Sheet Metal Repairs, Flight Control Rigging
 Cessna 500 Series Familiarization Schooling
Responsibilities:

6. Education Achievements:
 Cessna 500 Series Familiarization Schooling
US AIR EXPRESS/HENSON AVIATION, Salisbury, MD
October 1989 – June 1990
A&P Mechanic
Achievements:
 Dehaviland Dash 8 Familiarization Schooling
Responsibilities:
 Fuel Leak Repairs
 C Check Inspections
 Engine Service & Component Installation
 Assist In Flight Control Rigging
EDUCATION
Colorado Aero Tech, Broomfield, CO
FAA A&P License- Honor Student
Graduate: June 1989