This course will familiarize process, instrumentation and custody transfer engineers with the procedures and practices involved in the choice of flowmetering systems and their associated supporting equipment. It will address these points in relation to both single- and multi-phase flows and will give guidance on the optimum commercially available flowmeters through a detailed comparison of their relative merits. Flowmeter calibration is crucial to these topics.
The course also covers the related issues of level and tank measurement as well as lease automatic custody transfer and truck custody transfer, leak detection, loss control and monitor and control production losses.
Z Score,T Score, Percential Rank and Box Plot Graph
Liquid & Gas Flowmetering & Custody Measurement
1. Liquid & Gas Flowmetering
& Custody Measurement
Your Expert Course Leader
Dr. John L Sproston
John Sproston (UK) B. Sc., M.Eng., Ph D is a Senior Mechanical & Instrumentation Engineer with over 45
years of industrial experience in Process Control & Instrumentation, Liquid & Gas Flowmetering, Heat
Exchanger Engineering, Pumps, Compressors, Turbines and Control Valve Technology. He is currently a
Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman, Kuwait and KSA wherein he provides
consultancy services on both the application and operational constraints of process equipment in the oil & gas industries.
www.petroEDGEasia.net
2. Liquid & Gas Flowmetering & Custody Measurement
Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at
www.petroedgeasia.net
Course Description
This course will familiarize process, instrumentation and custody transfer engineers with the procedures and practices involved in the
choice of flowmetering systems and their associated supporting equipment. It will address these points in relation to both single- and
multi-phase flows and will give guidance on the optimum commercially available flowmeters through a detailed comparison of their
relative merits. Flowmeter calibration is crucial to these topics.
The course also covers the related issues of level and tank measurement as well as lease automatic custody transfer and truck custody
transfer, leak detection, loss control and monitor and control production losses.
Course objectives
Upon the successful completion of this course, each participant will be able to:
Apply an in-depth knowledge to the topics of liquid and gas flowmetering and custody measurement as well as to the fluid
mechanics of pipe flows
Assess flow measurement uncertainty in terms of the actual flowrate
Distinguish between the different flowmeter types including delta p, displacement, rotary-inferential, fluid oscillatory,
electromagnetic, ultrasonic and Coriolis mass flowmeters and to determine the optimum choice for a given application
Define and classify the various regimes of multiphase flow measurement and to understand the relative attributes of the main
industrial multiphase flowmeters in the determination of flowrate and quality
Make a considered judgement of the choice of fluid level measurement devices
Implement OIML Recommendation R117 including its requirements and operation
Understand the various types of flow calibration, metering system and provers including static and dynamic measurement,
meter proving, prover loop and custody transfer
Carry out tank measurement and tank calibration methods and to calculate net sellable quantities
Explain in detail the different types, methods and techniques used in lease automatic custody transfer and truck custody transfer
Discuss pipeline considerations made in the metering of liquid products
Employ systematic techniques in leak detection, loss control, monitor and control production losses
Apply the various API standards applicable to custody measurement
Who will benefit from attending this course?
This course provides an overview of all significant aspects and considerations of liquid and gas flowmetering and custody measurement
for instrumentation, inspection, control, custody, metering and process engineers and other technical staff. Further, piping engineers,
pipelines engineers, mechanical engineers, operations engineers, maintenance engineers, plant/field supervisors and foremen and loss
control coordinators will also benefit from this course.
About your Expert Course Director:
Dr. John Sproston (UK) B. Sc., M.Eng., Ph D is a Senior Mechanical & Instrumentation Engineer with over 45
years of industrial experience in Process Control & Instrumentation, Liquid & Gas Flowmetering, Heat Exchanger
Engineering, Pumps, Compressors, Turbines and Control Valve Technology.
He is currently a Senior Independent Consultant to various petrochemical industries in the UK, USA, Oman,
Kuwait and KSA wherein he provides consultancy services on both the application and operational constraints of
process equipment in the oil & gas industries.
During his early career, Dr. Sproston held key positions in Rolls Royce (UK) where he was involved in the design of turbine blading for jet
engines, subject to pre-specified distributions of pressure. During this period and since, he has also been closely involved in various aspects
of Turbomachinery, Thermodynamics and Fluid Mechanics where he has become a recognized authority in these areas.
Later, he joined the academic staff of University of Liverpool in UK as a Professor in Mechanical Engineering Courses. A substantial part of
his work has been concerned with detailed aspects of Flowmetering both of single & multiphase flows. He has supervised doctoral research
students in this area in collaboration with various European flowmeter manufacturers.
He joined Haward Technology Middle East in 2002 and was later appointed as European Manager ( a post which has since lapsed ) and has
delivered over 150 training courses in Flowmeasurement (single- and multi-phase), Control, Heat Exchangers, Pumps, Turbines,
Compressors, Valve and Valve Selection as well as other topics throughout the UK, USA, Oman and Kuwait. During the last two years he has
delivered Courses with other Training Companies operating in the Far and Middle East. He has published about 150 papers in various
Engineering Journals and International Conferences and has contributed to Textbooks on the topics listed above.
3. Liquid & Gas Flowmetering & Custody Measurement
Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at
www.petroedgeasia.net
3 DAY COURSE OUTLINE
Flowmetering Overview
Introduction to Pipeline Flowmetering
with Highlighted Problem Areas
Flow Measurement Accuracy
Flow Measurement Uncertainty
Repeatability and Reproducibility
Basic Statistics (Average and Standard
Deviation)
Calibration Graphs
Flow Conditioners & Operational Issues
Fluid Mechanics of Pipe Flows
Laminar Flows and Turbulent Flows
Pipe Velocity Distributions
Worked Examples
Pipe Fitting Losses
Flowmeter Types
Orifice Meters
Critical Flow Element
Venturi Meters
Flow Nozzles
Variable Area Meters
Pitot Tubes and Pitot Static Tubes
Target Flowmeters
Helical Gear Meter
Nutating Disc Meter
Piston Meter
Turbine Flowmeters
Vortex Shedding Meters
Electromagnetic Meters
Ultrasonic Flowmeters
Coriolis Mass Meters
Cross Correlation Methods
Tracer Methods
Weighing Methods
Velocity Profile Integration Techniques
Multiphase Flow Measurement
Description of Multiphase Flows
Definitions of Various Associated Terms
Flow Pattern Classification
Flow Regimes
Multiphase Measurement Problems
Multiphase Meter Classification
Response of Single-Phase Flowmeters in
Multiphase Flows
Wet Gas Flow Measurement
Application of Two Flowmeters for
Multiphase Flows
Comparison of various industrial
multiphase flowmeters available
Level Measurement
Buoyancy Tape Systems
Hydrostatic Pressure
Ultrasonic Measurement
Radar Measurement
Vibration Switches
Electrical Measurement
Installation Considerations
Impact on the Control Loop
Radar Level Measurement
OIML Recommendation R117
Introduction
Scope
General Requirements
Field of Operation
Accuracy Classes
API MPMS Chapter 5.8
Flow Calibration
Trends in Calibration
Types of Calibration Test Rigs
In Situ Calibration
Methods of Tank Calibration
Tank Gauging System
Tank Measurement Methods
Calculations of Quantities
Metering System & Provers
Main Types
Maintenance
Problems
Automatic Sampling
Prover Calibration Methods:
Calculations and Uncertainties
Prover Calibration Methods:
Practical Exercises
Meter Proving
Prover Loop
Prover Loop Calibration
Field Calibration by Water Draw
Meter and Prover
Troubleshooting/ Overall
Measurement Uncertainty
Lease Automatic Custody Transfer
Introduction
System Requirements
Operation
Equipment
Truck Custody Transfer
Introduction
Truck Types
Typical Equipment
Performance
New Developments
Pipeline Meter Considerations
Introduction
Flow in a Pipeline
Pipeline Installation Considerations
DP Transmitters
Multi-Port Averaging Pitot
Leak Detection Systems
Introduction
API 1130
A Theoretical or Practical
Approach
Real Time Transient Model
Practical Example
Results and Conclusions
Loss Control Systems
Introduction
Custody Transfer Sampling
Case Studies
Examples of Delivery
Malpractice
Monitoring and Controlling Production
Losses
Introduction
Types of Leaks
Meter Proving
Conclusions
API Standards
Introduction
API Gravity
Classification of Grades
Temperature Measurement
Measuring the Suspended S & W
Content
Calculating Net Volume
Conclusions
Sessions commence at 9am on all days, with
short intervals at 10.30am and 3.30pm
respectively with light refreshment.
Lunch will be provided at 12:30pm for 1 hour.
Sessions will end at 5pm on all days.
4. Liquid & Gas Flowmetering & Custody Measurement
Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at
www.petroedgeasia.net
DELEGATE DETAILS
DELEGATE 1
PAYMENT METHODS
By Cheque/ Bank Draft
Make Payable to Asia Edge Pte. Ltd.
By Direct Transfer
Please quote your invoice number with the remittance advise
Account Name: Asia Edge Pte. Ltd.
Bank Code: 508
Account Number: 762903-001
Swift Code: OCBCSGSG
All bank charges to be borne by payer. Please ensure that Asia Edge Pte Ltd
receives the full invoiced amount.
PAYMENT POLICY
Payment is due in full at the time of registration. Full payment is mandatory
for event attendance. By submitting this registration form, you have agreed
to Asia Edge Pte Ltd’s payment terms
CANCELLATIONS & SUBSTITUTIONS
You may substitute delegates at any time. ASIA EDGE PTE LTD does not provide
refunds for cancellations. For cancellations received in writing more than seven
(7) days prior to the training course you will receive a 100% credit to be used at
another ASIA EDGE PTE LTD training course for up to one year from the date of
issuance. For cancellations received seven (7) days or less prior to an event
(including day 7), no credits will be issued. In the event that ASIA EDGE PTE LTD
cancels an event, delegate payments at the date of cancellation will be credited
to a future ASIA EDGE PTE LTD event. This credit will be available for up to one
year from the date of issuance. In the event that ASIA EDGE PTE LTD postpones
an event, delegate payments at the postponement date will be credited towards
the rescheduled date. If the delegate is unable to attend the rescheduled event,
the delegate will receive a 100% credit representing payments made towards a
future ASIA EDGE PTE LTD event. This credit will be available for up to one year
from the date of issuance. No refunds will be available for cancellations or
postponements.
ASIA EDGE PTE LTD is not responsible for any loss or damage as a result of a
substitution, alteration or cancellation/postponement of an event. ASIA EDGE
PTE LTD shall assume no liability whatsoever in the event this training course is
cancelled, rescheduled or postponed due to a fortuitous event, Act of God,
unforeseen occurrence or any other event that renders performance of this
training course impracticable or impossible. For purposes of this clause, a
fortuitous event shall include, but not be limited to: war, fire, labor strike,
extreme weather or other emergency.
PROGRAM CHANGE POLICY
Please note that speakers and topics were confirmed at the time of publishing;
however, circumstances beyond the control of the organizers may necessitate
substitutions, alterations or cancellations of the speakers and/or topics. As such,
ASIA EDGE PTE LTD reserves the right to alter or modify the advertised speakers
and/or topics if necessary. Any substitutions or alterations will be updated on
our web page as soon as possible.
ASIA EDGE PTE. LTD.
Company Registration No: No. 200710561C
Copyright@ 2005 ASIA EDGE PTE LTD. All rights reserved.
This brochure may not be copied, photocopied, reproduced, translated, or
converted to any electronic or machine-readable form in whole or in part
without prior written approval of ASIA EDGE PTE LTD
Mr Ms Mrs Dr Others:
Name :
Job Title :
Department :
Telephone No. :
Email :
Head of Dept. :
DELEGATE 2
Mr Ms Mrs Dr Others:
Name :
Job Title :
Department :
Telephone No. :
Email :
Head of Dept. :
Company :
Address :
Country : Postcode:
Attention Invoice to :
Telephone No. :
Fax No. :
4 EASY WAYS TO REGISTER
Phone: +65 6741 9927 Fax: +65 6747 8737
Online: www.petroedgeasia.net Email: info@asiaedge.net
Please note
- Indicate if you have already registered by Phone +Fax +Email +Web
- If you have not received an acknowledgement before the training course, please call us to
confirm your booking.
Liquid & Gas Flowmetering & Custody Measurement
R E G I S T R A T I O N F O R M