1. 102 Fornelius Avenue , Clifton, NJ 07013 •551-206-3519 •PPerehinec@yahoo.com
Peter Perehinec
Experience
09/74-06/15 Lummus CBI
(Previously Lummus ABB, & Lummus
Co. Inc. ) Bloomfield, New Jersey
Titles at Lummus: Sr. Principal Process Technology Engineer / Project Engineer,
Project Engineering Manager
Main Job Functions: Chemical Process P&ID's & related Safety Interlocks. Field & DEC
support. Supervision of and coordination with other office locations P&ID & detailed
engineering work.
Equipment specification for capital improvement / replacement, preparation of drawings
and supervision of installations.
ACCOMPLISHMENTS:
o Organized and presented Engineering Training course for process equipment system
design conditions - 2004.
o Reviewed and provided input on development of Lummus’ first OCU P&ID's. Subsequently
provided input to technology regarding economic impact on piping class of mixed feed
treaters. This resulted in process design change to reduce cost.
o Provided design condition inputs which have been adopted as standards including charge
gas discharge, chilling train, towers with spare reboilers, heat exchanger tube rupture,
design condition margins for systems with preemptive interlocks.
o Provided Input to Annotated / standard P&ID's updating based on ongoing projects
experiences
o Developed recent changes to P&ID piping arrangements for dense phase ethylene for
quench water and refrigerant heat exchanger applications for metallurgy and overpressure
protection considerations.
o Recently Initiated electronic PDF mark up’s of review comments of P&ID’s and other
drawings & documents instead of antiquated hand mark up’s which eliminates making paper
copies for records and sending to persons involved, etc.
ADDITIONAL CONTRIBUTIONS :
Ongoing coordination with safety department & updating P&ID's as needed based on safety
concerns due to recent events and for compliance with code regarding unobstructed over
pressure relief paths.
Field support during construction ~ 3 months summer of 1984 ; Lima Aromatics Project
coordination of answering construction questions regarding pipe routing , field & office
changes.
Expansion Projects experience involving successful detailing of existing plant modifications
and integration of new additional parallel or larger equipment, piping with existing.

2. 551-206-3519•PPerehinec@yahoo.com
Peter Perehinec
Some projects also included entire parallel and additional process units.
RESPONSIBILITIES:
o Provide input to managers and engineers for development of hydrocarbon chemical process
piping and instrumentation flow diagrams. This has included extensive communications via
e-mail, drawing mark ups, telephone of work done mostly in offices Delhi India and
Woodlands Texas.
o Participated in and conducted P&ID review screening meetings.
o Responsible for approval and/or input final P&ID's, pump equipment data, relief valve,
interlocks, control valve data, supporting calculations and plot plans, special piping
arrangement , special piping and valve arrangements when needed.
o Responsibility involves coordination and communication of technical information to
individuals in person, written e-mails, written documents, checklists to review result findings.
Completed P&I drawing sketches & markups. Coordination executed locally in-office and
remotely with other offices.
o Assist Project managers in P&ID related review and scheduling as needed.
o Coordination with Safety/Code, Instrument, Process, Mechanical, Piping specialist
Engineers as needed.
o Project Engineering Manager (~ 3 years) during time when there was Detailed
Engineering in Bloomfield office prior to restructure of organization. This involved some
equipment requisitions, bid evaluation, purchase orders, vendor drawing review, piping
layout review, plot plans, line & insulations schedules, instrument alarm & interlock trip
setting.
o P&ID Technical Information includes:
o Drawing layouts consideration process flow configuration with relative elevations as
needed for a system and operating considerations,
o Mechanical temperature, pressure, vacuum design conditions & materials of
construction. Representation of process control, piping, valves, insulation,
equipment, safety overpressure relief, interlocks.
o P&ID review screening meetings. Approval and/or input final P&ID's, pump
equipment data, safety relief valve data, interlocks, control valve data, supporting
calculations when needed.
o Coordination methods involve communication of technical information to individuals
by person, e-mails, other written documents, checklists, P&I D sketches & mark
ups.
EXPERIENCE:
o P&ID's for Basic Engineering and Some Expansion Projects for following types of
processes:
o Ethylene Plants:
o Gas, liquid, gas & liquid mixed feed cracking heaters (furnaces).
o Heater effluent quenching, recovery /separation sections: gasoline fractionator,
quench tower, quench oil, and quench water systems, fuel oil, pyrolysis gas oil
byproducts.
o Change gas compression, drying, chilling, and separation.
o C2, C3 Binary, Tertiary Refrigeration systems.
o C2 , C3, C4 fractionation systems
o Acetylene & MAPD Converters. C2 Product systems, driers, drier & reactor
regeneration systems.
o OCU Units:
o Reviewed and provided input to first Lummus Bloomfield OCU P&ID's.
o Feed, Feed Treaters, Reactors, Refrigeration, Regeneration systems for reactors &
treaters.
o Reviewed Detailed Engineering Contractor's P&ID's

3. 551-206-3519•PPerehinec@yahoo.com
Peter Perehinec
o C4 Hydro, SHU Units:
o Feed systems, Reactors, regeneration
o Miscellaneous:
o Dense phase C2 feed & product systems.
o P&ID's for products storage tanks.
o Catofin unit familiarity.
o General: Review of and preparation, line schedule's, interlock alarm & trip settings
o Piping pressure drop hydraulic calculation, pump hydraulics and requisition/
purchase data, relief valve case analysis and data sheet preparation.
o Charge Gas Compressor Simulation Process Flow diagram and follow up to P&ID
related work on CPC4 project.
03/74-09/74 Engelhard Industries System Department East Newark, New
Jersey
Project Engineer
• Responsible for design and cost estimation of custom air pollution abatement and gas
purification systems.
06/72-03/74 Allied Chemical Corporation Elizabeth, New
Jersey
Plant Project Engineer
 Responsible for various capital equipment replacement projects.
 Involved in all phases of projects: estimation, requisitions, bid evaluations, purchase orders,
supervising field installation.
 Weekend duty on call for 24 hours/day for 1 weekend each 4 to 5 weeks
Education
1976-1980 Newark College of Engineering Newark, New Jersey
Master of Science – Chemical Engineering
1968-1972
Newark College of Engineering Newark, New Jersey
Bachelor of Science – Chemical Engineering
1967-1968 University of Akron Akron, Ohio
( General 1st
year intended major Architecture )
References

4. 551-206-3519•PPerehinec@yahoo.com
Peter Perehinec
References are available on request.