6. TRACTORS, AGRI &
FORESTRY EQUIPMENTS
CONSTRUCTION
EQUIPMENTS
REFUSE & MUNICIPAL
VEHICLES
MATERIAL HANDLING
EQUIPMENTS
MARKETS WE SERVE
6
www.pennarindia.com
8. 8
www.pennarindia.com
Band Saw Cutting
Pennar uses two precision
band saws to cut steel tubes,
Piston rods and bar which can
cut up to 250mm Dia.
The processed steel is used to
build Parts for Hydraulic
cylinders.
9. 9
www.pennarindia.com
CNC & VMC Machines
Two high precision VMC with 1320 x 450
mm Bed size with capacity of Hold and
machine 1500 Kgs Max. which covers
most of our requirements in components
machining.
Six high precision CNC Machines with
Which can hold upto 400mm Dia.
We follow 5S Practices and Kaizen for
Continuous improvement.
10. 10
www.pennarindia.com
Conventional Lathes & Drilling Machines
Pennar has 6 Conventional Lathes small
and Big in size with Max of 2.5 Mtrs Bed
length and Job Dia 500 Max.
3 Conventional Pillar type Drilling
machines for clevis pin hole and Port
hole drilling.
11. 11
www.pennarindia.com
SPMs
Flex Arm Tapping Machines can do up to
2” BSP Tapping with 2 independent Arms
and Precision controlled Orbit Motors.
Thread Rolling machine with Dies up to
M20 Size for Tie rod type Cylinders.
12. 12
www.pennarindia.com
Welding Machines and Fixtures
End Caps and Clevis are welded
on Seamless Tubes. These
precision work surfaces enable
us to produce consistent and
accurate weldments.
13. 13
www.pennarindia.com
Assembly Section
Pennar has a complete conveyorized
Assembly Section with Pneumatic and
Mechanical Torque tools to Assemble our
Cylinders.
Engraving, Labelling and Bar coding done
as per customer requirements and
standards.
14. 14
www.pennarindia.com
Cylinder Test Bench
Cycle test method as per SAE J214
standard with 100% Inspection method is
followed. It is ensured that all the
cylinders pass thru the test.
10 work stations with 350 Bar Max test
capacity. Analog Gauge read out for each
stations to monitor the pressure. Auto
and Manual cycle mode with
independent operating switches for
testing the cylinders.
15. 15
Conveyorized Paint Booth System
To help control lead times, Pennar paints machines on 3 shifts 24 hours a day.
Conveyorized paint booth system consists of Automated De-greasing, rust
removing, and cleaning tanks followed by Pre-Heater system and a Primary and
secondary coating unit (Dry painting station) and a Post Heating which can go up to
220 Deg C.
Capacity = 300 Cyls / shift with a conveyor speed upto 1.5 Mtrs/Min Max.
16. 16
www.pennarindia.com
Material Handling capacity
We Have Two 10 Tons Double Girder Over Head cranes with a Long travel of 300
mtrs and a span of 25 Mtrs.
We Do have a Battery operated Forklift to lift and move a light weight items.
We also have a Normal 2 Ton Forklift to assist in loading & unloading materials from
Containers.
17. 17
www.pennarindia.com
Quality Control
Quality is built into every Pennar.
At each stage of production the quality
control staff thoroughly checks the
construction of your Pennar Hydraulics to
insure the best quality and accuracy possible. SALT SPRAY MACHINE
UT MACHINE
HARDNESS TESTER
22. 22
www.pennarindia.com
Steel Inventory
We stock Inventory and follow FIFO in
imported Precisely Honed tubes with H8
Tolerance, CK45 Chrome plated Rods with f7
Tolerance and 15 – 20 Mic chrome thickness
and Ductile Bars in 6 mtrs length procured
from Mills directly.
