1. DUAL INTERFACE
INSTRUCTIONS
WHITE
YELLOW
GREEN
ORANGE
BLUE
BROWN
BLACK
RED
Connect (2) Spaside Controls
to any Standard, Deluxe or
Ultimate Series Spa Controls System
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts 920-925-3094

2. CONNECTION
Circuit Board Connection
SIDEPANEL OPT. SIDEPANEL AUX. I/O TEMP.
http://www.MyPoolSpas.com
Spa Mounted
Spaside Control
Fig. 1
WHITE
BLUE
In-House Control
GREEN
YELLOW
ORANGE
RED
or
B R O WN
BLACK
Remote Control
! Connect 2 controls with up to 200 feet of
cord each
! Does not require external power supply
! Fuse protected connectors
Wholesale Pool and Spa Parts
2 2/8” 1 3/32”
CONNECTION:
K Position and attach Dual Spaside Interface using the double-sided tape on back
of box.
L Connect Interface cord (top of box) to Spaside connection on printed circuit
board.
M Connect the spa mounted spaside control to the standard connection as shown
3 1/4”
in Figure 1. (See note on back page)
BLACK
BROWN
RED
ORANGE
YELLOW
GREEN
BLUE
WHITE
N Connect the In-House or Remote Control to the terminal block (wire colors
noted on label) as shown in Figure 1.
920-925-3094

3. Note: The control connected to the standard connection of the Dual
Interface (Spa Mounted) will be recognized as the primary control if for any
reason a key on the secondary (In-House or Remote) and primary are
pressed simultaneously.
85-0074 Rev.0 09/02
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts 920-925-3094