2. Building a Greenhouse
based on Arduino Software?
• Greenhouses are controlled-area-environment to
grow plants.
• In order to control the climate factors and
environment autonomously, it is required a
computer/software equipment.
• Arduino boards are able to receive, analyze and
send data in order to maximize plants growth and
health.
3. Research
1.0
1.1 System Operation – lV.
•1.1.1 Water Injection
1.2 Microcontroller – l.
•1.2.1 Arduino Mega
Board
•1.2.2 Digital I/O
•1.2.3 Analog I/O
•1.2.4 Operating
1.3 Display – lll.
•1.3.1 Power Consumption (24v)
•1.3.2 Cost
1.4 Sensors – V.
•1.4.1 Humidity
•1.4.2 Temperature
•1.4.3 Camera Sensors
•1.4.4 Gas Sensor
1.5 Relays – l.
1.6 Enclosure – ll. – Vl.
•1.6.1 Green House Structure
•1.6.2 Plants resistant and viability
•1.6.3 Weather resistance
Design
2.0
2.1 Hardware – lV. - Vl. – ll.
•2.1.1 Display/Computer
•2.1.2 Sensor Interface
• 2.1.2.1 Relative Humidity
• 2.1.2.2 Temperature
• 2.1.2.3 CO2
•2.1.3 Power Supply
• 2.1.3.1 (24) V power consumption
• 2.1.3.2 Solar Panels
• 2.1.3.3 Batteries
•2.1.4 Housing
• 2.1.4.1 Mounting
• 2.1.4.2 Enclosure
• 2.1.4.3 Water Injection
2.2 Software – l. – V. – lll.
•2.2.1 Sensor Inputs
• 2.2.1.1 Relative Humidity
• 2.2.1.2 Temperature
• 2.2.1.3 CO2
•2.2.2 User Components
• 2.2.2.1 Acquiring
• 2.2.2.2 Storage
PROSSATeam Greenhouse Project
Acquirements
3.0
3.1 Funding
•2.1.1 AGMUS
•2.1.2 NASA Ames Research
Center
2.2 Supplie’s List - All
2.3 Sourcing
•3.3.1 References
3.4 Purchasing
•3.4.1 Project Cost - $457.87
Work Distribution:
Angel Andino – I.
Melissa Rivera – ll.
Ademyr Rivera – lll.
Jemaris Martes – lV.
Karina Martínez – V.
Josean Reyes – Vl.
4. Greenhouse Materials (Hardware)
• Arduino Boards
• Sensors:
- Temperature (3)
- Humidity (3)
- Camera (1)
- Gas (1)
• Holders
• Housing (based on CubeSat desing)
• Screws
• Plants
• Water Hose
• Water Injection:
- tank
- valves
- water hose
- minerals
• Power Supply
- Batteries
- Solar Energy
• Acrylic Sheets
• Glue Sticks
• Cables
• Computers
• Micro SD Card
