Presentation on using Surfacing using SolidWorks CAD

1. Norman F. Simms
CAD Mechanical / Electrical Designer
Surface Modeling in SolidWorks

2. Create 3D Sketch to Guide your Surfaces
2
Norman F. Simms Mechanical / Electrical Designer 215-269-0390

3. 3
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Creating aLofted Surface

4. 4Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Sweep (Profile, Path, and Guide Curve)

5. 5Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Sweep (Profile, Path, and Guide Curve)

6. 6Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Sweep (Profile, Path, and Guide Curve)

7. 7
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Loft (Tangency to Face)

8. 8
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Loft (Tangency to Face – Adjust End Constraints)

9. 9Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Loft (Tangency to Face)

10. 10Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Knit Surfaces

11. 11Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Pull Point 1
Filled Surface with Constraint Point

12. 12
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Filled Surface with Constraint Point for the other Side

13. 13
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Planar Surface
Planar Surface
Creating Planar Surfaces

14. 14
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Knit Surface – Combining Surfaces Together

15. 15Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Revolved Surface – (Revolving Line Around an Axis)

16. 16
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Move Copy (Moving Surface down -6.35mm)

17. 17
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Trim Surfaces

18. 18Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Extrude Surface & Move & Copy Surface
Move/Copy Command

19. 19
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Using Move/Copy Command to
Copy and Rotate Surface
Select Feature in the Feature Tree and Select Hide

20. 20
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surface Modeling is used in designing all types of complex cures and is
used more and more in product design, automotive, aircraft, and a host
of other applications.
If you are someone who is trying to understand CAD , I hope this was a
help.
If you are someone who needs someone to help them create new designs.
I hope you will use the number below and give me a call.
Thank You for Your Time.