GRE (Generic Routing Encapsulation)

1. GRE (Generic Routing
Encapsulation)
www.netprotocolxpert.in

2.  Generic routing encapsulation (GRE) is an IP
encapsulation protocol which is used to transport IP
packets over a network. Generic routing encapsulation
(GRE) was initially developed by Cisco, but later become
industry standard (RFC 1701, RFC 2784, RFC 2890).
 Generic Routing Encapsulation (GRE) can tunnel any
Layer 3 protocol including IP. In GRE (Generic Routing
Encapsulation) an IP datagram is tunneled (encapsulated)
within another IP datagram.
www.netprotocolxpert.in

3.  One great advantage of GRE (Generic Routing
Encapsulation) is that it allows routing of IP packets
between private IPv4 networks which are separated over
public IPv4 internet. GRE (Generic Routing Encapsulation)
also supports encapsulating IPv4 broadcast and multicast
traffic.
 Generic routing encapsulation (GRE) tunnels are not
secure because Generic routing encapsulation (GRE)
does not encrypt its Data payload. In real-time, Generic
routing encapsulation (GRE) used together with other
secure tunneling protocols like IPSec to provide network
security.
www.netprotocolxpert.in

4. www.netprotocolxpert.in

5.  Following are the fields of Generic Routing Encapsulation
(GRE) Header.
 Flag C (Checksum Present) : Used to indicate that the Checksum field
is present and contains valid information, when set to 1.
 Flag R (Routing Present) : Used to indicate that the Routing fields are
present and contain valid information, when set to 1.
 Flag K (Key Present) : Used to indicate that the Key field is present in
the GRE header, when set to 1.
 Flag S (Sequence Number Present) : Used to indicate that the
Sequence Number field is present, when set to 1.
 Flag s (Strict Source Route) : Set to 1 the routing information consists
of Strict Source Routeswww.netprotocolxpert.in

6.  Recursion Control and Version Number are normally set to 0
 Protocol Type : Protocol Type field is used to mention the
protocol payload of the GRE packet. For IP, this field is set to
0x800
 Checksum : Checksum field value is used to check the integrity
of the GRE header and the payload.
 Key : Key field value is used to authenticate the GRE packet's
encapsulate.
 Sequence Number : Sequence Number filed value is used to
track the sequence of GRE packets
www.netprotocolxpert.in

7. Generic Routing Encapsulation (GRE)
Encapsulation
 Following image shows the difference between original IP
Datagram and Generic Routing Encapsulation (GRE)
encapsulated IP Datagram.
www.netprotocolxpert.in

8. www.netprotocolxpert.in