Create beautiful bows to add to your gift wrapping by Create & Craft TV's Gift Wrapping Expert & Creative Business Growth Expert Neelam Meetcha
Learn more on our hands on master gift wrapping classes at bit.ly/1ux14YW
💗📲09602870969💕-Royal Escorts in Udaipur Call Girls Service Udaipole-Fateh Sag...
How to make a shredder bow
1. Gift Wrapping Ideas
STEP BY STEP GUIDE ON HOW TO EXQUISITELY WRAP YOUR PRESENTS • PAGE 43
Project 9
How to Create a Dynamic Shredder Bow
You Will Need
• Ribbon stripper –
(www.giftwrappingcourses.co.uk)
• Polyester ribbon – 2”wide
(two colours optional) (County Baskets)
• Double-sided tape
• Clear tape
• Scissors
A modern twist to bow making
with our amazing ribbon stripping
tool, no gift wrapper should be
without this. In this project you
will learn how to make a fantastic
intricately cut bow.
2. Gift Wrapping Ideas
STEP BY STEP GUIDE ON HOW TO EXQUISITELY WRAP YOUR PRESENTS • PAGE 44
Cut three strips of each colour of the
ribbon measuring approximately 15cm/6”
long. You can make this bow with one
ribbon colour.
Step
1
Step
2 Leave approximately 2cm/1”on each side.
Place the first ribbon strip in between the
teeth of the ribbon stripper.
Apply even force on the stripper and strip the ribbon
– do not strip the ribbon off the end.
3. Gift Wrapping Ideas
STEP BY STEP GUIDE ON HOW TO EXQUISITELY WRAP YOUR PRESENTS • PAGE 45
Step
4
Repeat the same for all six strips of
ribbon.
Fold the stripped ribbon in half and twist
the ribbon at the base. This will create a
beautiful flower effect.
TIP - Gently tug the ribbon in the shredder to ensure ribbon
isn’t shredded to the end.
Step
3
4. Gift Wrapping Ideas
STEP BY STEP GUIDE ON HOW TO EXQUISITELY WRAP YOUR PRESENTS • PAGE 46
Apply clear tape to the base of the ribbon
to create a strong stem. Apply double-
sided tape around the stem and remove
the backing.
Step
6 Take another piece of stripped ribbon fold
in half and wind around the double-sided
tape. Apply clear tape to the stem.
Step
5
5. Gift Wrapping Ideas
STEP BY STEP GUIDE ON HOW TO EXQUISITELY WRAP YOUR PRESENTS • PAGE 47
Repeat the process with the remainder stripped
ribbons and finish off with double-sided tape.
Take a strip of ribbon approximately
15cm/6”long and strip all the way off the
end creating thin strips of ribbon.
Twist the shredded ribbon strip around
the double-sided tape and finally secure
with clear tape.
Step
8
Step
9
Step
7
Make a small cut at the base of the ribbon
stem. Ensure the cut is small, do not cut
too deep and gently pull apart, do not
split the ribbon too deep.