Polymer supported Catalysts are in the form of network polymers in the form of beads.these polymers support can easily be recycled at the end the reaction mixture . It facilitates the purification process and isolation.
3. INTRODUCTION
Polymer support is one such
attempt in the field of solid phase
peptide synthesis which has
resulted in improved reaction
yields and also simpler steps of
purification.
Polymer support in which
catalytically active species are
immobilized through chemical
bonds or weaker interaction such
as H-bonds or donor -acceptor
interactions.
Organic + reagent catalysts
Substrate
Desired product + By-product
excess reagents
catalysts etc.Isolation process
Desired product (
crude)
Purification
Pure
product
3
4. PROPERTIES OF POLYMER SUPPORT
Insoluble in common solvents.
Reusable.
Undergo straight forward reaction and be free
from any side reactions.
Easy to handle and should not undergo mechanical
fracturing during synthetic operations.
Functional group should be uniformly distributed
in the polymer.
Either of relatively rigid (nonswellable) or of quite
flexible (swelling) type.
4.
5. CHOICE OF POLYMERS
A range of polymers which are used in organic
synthesis are poly vinyl alcohol, polyethylene glycol,
polyethylene imine, polamino acids, polyvinyl
chloride and various phenol- formaldehyde resins
etc.
The selection of a polymer support
depends on the type of the reaction to be
performed.The most abundantly used polymer
support is the styrene based polymers.
5.
6. Continue...
Reason for using polystyrene as supported catalyst:
1. Aromatic ring can be easily functionalised.
2. Being hydrocarbon like,These polymers are
compatible with organic solvents.
3. These polymers are not degraded by most
chemical reagents under ordinary conditions.
4. The type and degree of cross-linking can be
easily be controlled.
6.
7. Reactions involving polymer support
Type 1:
In this type of
reactions, the organic
substrate is covalently
bound to the polymer
support and reacted
with the reagent ,
catalyst, etc.
7.
Polymer support
Organic substrate
Polymer bound
substrate
Polymer bound product
isolated in pure state by
filtration; the excess reagent
etc. are removed
Desired product
+
Spent polymer (isolated by solvent
extraction)
Hydrolysis and
filtration
Treated with reagent, Catalysts etc.
9. Type 2:
In this type of synthesis ,the reagent is linked to
a polymeric material to form a functionalised
polymer supported reagent.
Special advantage of such
reagent is the ease of separation of the product
from spent reagent, an increased selectively of
the reagent due to steric hindrance and in some
cases the spent reagent may be regenerated.
9.
11. Preparation of Ethers from Alcohols by
using polymeric AlCl as a catalyst:
Type 3:
Polymer supported catalytic reactions :
In this type of reaction, conventional catalyst
which is usually used in the homogeneous phase, is
linked to a polymer backbone and used in this form to
catalyze reactions.
For example:
3
11.
12. 12.
The presence of polymer mediates the effect of
strong Lewis acid Catalyst producing higher yields
of the desired ether and lower yields of the
competing, higher molecular weight side products.
13. Conclusion
Use of polymeric material in organic synthesis , facilitate the
isolation and purification in simplified manner and in high
yields. And also having properties as
13.
14. References
1. V.K.Ahuluwalia,Renu Aggarwal; Organic Synthesis Special
Techniques; Narosa Publishing House; 2nd Ed. ; 2006; 150-
191.
2. Maurizio Benaglia , Alessandra Puglisi, and Franco Cozz;
polymer -supported Organic Catalysts; American chem.
Society; 2003; vol.103; no.9.
3. Tor E. kristensen, Kristian Vestli,Martin G.Jakobsen,Finn
k.Hansen,and Tore Hansen; AGeneral Approach for
Preparation of Polymer-supported choral organocatalysts
via Acrylic Copolymerization; J. Org. Chem. 2010; 75; 1620-
1629.
14.