For more information visit this link: https://www.justcerts.com/Cisco/642-999-practice-questions.html
Here You Trust the best-selling Cisco Certified Network Professional Data Center Certification series of Cisco Exams. Press to help you learn, prepare, and practice for Cisco 642-999 exam success. This series is built with the objective of providing assessment, review, and practice to help ensure you are fully prepared for your Cisco 642-999 certification exam.
2. Required Exams:
The exams required to get CCNP Data Center Certification are:
• 642-999 DCUCI: Implementing Cisco Data Center Unified Computing (DCUCI)
• 642-997 DCUFI: Implementing Cisco Data Center Unified Fabric (DCUFI)
AND
• 642-998 DCUCD: Designing Cisco Data Center Unified Computing (DCUCD)
• 642-996 DCUFD: Designing Cisco Data Center Unified Fabric (DCUFD)
OR
• 642-035 DCUCT: Troubleshooting Cisco Data Center Unified Computing (DCUCT)
• 642-980 DCUFT: Troubleshooting Cisco Data Center Unified Fabric (DCUFT)
3. Intended Audience for this
Certification:
This certification is best for services and
technology architects, design engineers
and implementation engineers who
perform data center design, installation
and maintenance.
Prerequisites:
As specified by Cisco, the candidate must
have CCNA Data Center or CCIE
certification.
4. Facts about Exams:
642-999 DCUCI
• Time Allowed - 90 Minutes
• No. of Questions - 65-75
• Available Languages - English and Japanese
642-997 DCUFI
• Time Allowed - 90 Minutes
• No. of Questions - 65-75
• Available Languages - English and Japanese
5. Facts about Exams:
642-998 DCUCD
• Time Allowed - 90 Minutes
• No. of Questions - 65-75
• Available Languages - English and Japanese
642-996 DCUFD
• Time Allowed - 90 Minutes
• No. of Questions - 65-75
• Available Languages - English and Japanese
6. Facts about Exams:
642-035 DCUCT
• Time Allowed - 90 Minutes
• No. of Questions - 65-75
• Available Languages - English and Japanese
642-980 DCUFT
• Time Allowed - 90 Minutes
• No. of Questions - 65-75
• Available Languages - English and Japanese
7. Demo Questions:
Question: 1
When upgrading a standalone Cisco UCS C-
Series server, which method is correct?
A. direct upgrade on all components
B. Cisco Hardware Upgrade Utility
C. Cisco Host Upgrade Utility
D. Cisco Server Upgrade Utility
Answer: C
8. Demo Questions:
Question: 2
In a standalone Cisco UCS C-Series server, which
recommendations can be used to upgrade the BIOS?
A. Cisco IMC
B. Cisco UCS Manager
C. iFlash32 Utility
D. Flash ROM Utility
F. EFI Interface
F. Cisco Host Upgrade Utility
G. USB Flash Utility
Answer: F
9. Demo Questions:
Question: 3
What are the default settings of the Cisco IMCCIMC NIC properties on a
standalone Cisco UCS C-Series server?
A. 'Shared LOM' NIC mode with 'Active-active' NIC redundancy and DHCP
enabled
B. 'Shared LOM' NIC mode with 'Active-standby' NIC redundancy and
DHCP enabled
C. 'Dedicated' NIC mode with 'Active-standby' NIC redundancy DHCP
disabled
D. 'Dedicated' NIC mode with 'None' NIC redundancy and DHCP enabled
F. 'Cisco Card' NIC mode with 'Active-active' NIC redundancy and DHCP
enabled
Answer: D
10. Demo Questions:
Question: 4
Which ports can access the Cisco IMC if you select Shared
LOM NIC mode in the Cisco IMC Configuration Utility for a
Cisco UCS C-Series server?
A. the ports on an installed Cisco network adapter card
B. the two 1-Gb Ethernet ports
C. the two 10/100 management ports
D. the two 10/100 management ports, but each port has a
default setting
Answer: B
11. Demo Questions:
Question: 5
Which NIC redundancy modes allow the LOMs to be
discovered by the operating system or hypervisor?
A. Dedicated mode
B. Active/Active
C. Active/Standby
D. Cisco Card Mode
Answer: A
12. For Preparation & Discussion Cisco 642-999 Exam
https://www.justcerts.com/cisco/642-999-practice-questions.html
Extra 15% Discount Coupon Code: JC2016