1. MAYANK KUMAR
Contact No: +91-8826217436
Email ID: mayanksharma285@gmail.com
Carrier Objective
Seeking a competitive and challenging work profile and keen towards learning and contributing to the best of my
ability towards the growth and development of the organization I shall be associated with.
Education Qualification
2014 Bachelor of Technology (B.Tech.) in
Mechanical Engineering
Aggregate 65% Marks in Delhi institute
of technology and Management Sonipat,
Affiliated by M.D.University, Rohtak
2010 12th
Standard Aggregate 70% in CBSE, Board
2008 10th
Standard Aggregate 67% in CBSE, Board
Software Skills
Design and Review Software : Aveva PDMS 11.6/12.0 (Plant Design Management System), Naviousworks
Drafting : Auto – CAD
Other : Microsoft Office Packages
Working Experience
Presently (July.2014 onwards) working with Ozone Plant Design Services Pvt. Ltd
Designation: Piping Engineer
Ozone is a worldwide consulting engineering firm for specialized services in state-of-the-art Engineering design
for Oil & Gas, Chemical, Power and Water treatment industry.
Working Projects and Its Responsibilities:-
1.
Project Feed and Detail Engineering for LPG import and Handling Facility
Owner RAK GAS LLC
Contractor OZONE PLANT DESIGN SERVICES PVT. LTD.
Feed and detail engineering for LPG import and handling facility. To build LPG Terminal with allied facilities at
their Khore Khwair Plant intended to receive bulk LPG by ship, offload, transfer, store and distribute by road
tankers. The terminal will be designed for around 6000-8000 tons with one or more spheres installed within
the plant area and room for future expansion.
Responsibilities;-
• Preparation of PFD, P&IDs.
• Preparation of Plot Plan as per standard.
• Preparation of Equipment layouts.
• 3D Modeling of pipe routing elements as per the projects Basis of Design.
• Checking the Piping layout as per P&ID.
• 3D Modeling of pipe supports as per project pipe support standard.
• 3D modeling of equipment layout.
• Piping layout and nozzle orientation in 3D model.
• 3D Modeling of Safety Elements and Obstruction Volumes.
• Clash Check, Prepare PDMS Review Model, Material and Drawing Checking
• Checking of Equipment’s and Instruments Data sheet
• Preparation and checking of bulk MTO.
• As built drawings and documentation based on site mark up, Model review.
Extracts and produce (PDMS) the following:
Piping Isometrics
Piping General Arrangement Drawings
2. 2.
Project Complex Gas Treatment Unit (CGTU)
Owner Zhaikmunai LLP
Client Gateway Ventures CA Ltd.
Piping designing of 04 no. skids, namely Fuel gas produced water system and closed drain system (Unit-11),
Fuel gas receiver skid (Unit-13) and Buffer vessels skid (Unit-15) and Methanol Chemical injection skid (unit-
14).
Responsibilities;-
• 3D Modeling of pipe routing elements as per the projects Basis of Desig
• Checking the Piping layout as per P&ID
• 3D Modeling of pipe supports as per the project pipe support standard
• 3D modeling of equipments and nozzle orientation.
• 3D Modeling of Safety Elements and Obstruction Volumes
• Clash Check, Prepare PDMS Review Model, Material and Drawing Checking
• Checking of Equipment’s and Instruments Data sheet
• Preparation and checking of bulk MTO,
• As built drawings and documentation based on site mark up, Model review.
Extracts and produce (PDMS) the following:
Piping Isometrics
Piping General Arrangement Drawings
3.
Project Vacuum Ejector system (FEED PREPARATION UNIT)
Owner IOCL HALDIA REFINERY, INDIA
Client ESN Engineering Services Network GMBH
Piping design engineering for vacuum ejector system unit-105
Responsibilities;-
• 3D Modeling of pipe routing elements as per the projects Basis of Desig
• Checking the Piping layout as per P&ID
• 3D Modeling of pipe supports as per the project pipe support standard
• 3D modeling of equipments and nozzle orientation.
• 3D Modeling of Safety Elements and Obstruction Volumes
• Clash Check, Prepare PDMS Review Model, Material and Drawing Checking
• Checking of Equipment’s and Instruments Data sheet
• Preparation and checking of bulk MTO,
• As built drawings and documentation based on site mark up, Model review.
Extracts and produce (PDMS) the following:
Piping Isometrics
Piping General Arrangement Drawings
4.
Project BHAGYAM FIELD DEVELOPMENT PROJECT
Owner CAIRN INDIA
Client CAIRN INDIA
Piping design engineering of Modular cellar piping skids
Responsibilities;-
• 3D Modeling of pipe routing elements as per the projects Basis of Desig
• Checking the Piping layout as per P&ID
• 3D Modeling of pipe supports as per the project pipe support standard
• 3D modeling of equipments and nozzle orientation.
• 3D Modeling of Safety Elements and Obstruction Volumes
• Clash Check, Prepare PDMS Review Model, Material and Drawing Checking
• Checking of Equipment’s and Instruments Data sheet
• Preparation and checking of bulk MTO,
• As built drawings and documentation based on site mark up, Model review.
Extracts and produce (PDMS) the following:
Piping Isometrics
Piping General Arrangement Drawings
3. Personal Details:-
Date of Birth 24 May. 1993
Nationality Indian
Marital Status Unmarried
Address U-26B Street no-4, 5 Vijay Naga rNarela, Delhi - 110040
Passport no. M7461752
Languages Known English & Hindi
Declaration:-
I hereby declare that the above written particulars are true to the best of my knowledge. Assuring utmost
faithfulness and dedication in work assigned, if selected.
Date:
Place: (Mayank Kumar)