1. Rentar Fuel Catalyst
Models/Sizes/Applications
***
Engine Applications Applications
HBEN 1508
1.5” dia by 8” long
38.1 mm dia by 203.2 mm long.
Inside fuel line diameter max .3125”or 7.9 mm
Unit Weight = 1.1 lb Box Size=8.5”x 4”x 4”
HBEN 2010
2” dia by 12” long
50.8 mm dia by 304.8 mm long
Inside fuel line diameter size max is .75” or 19
mm with a BSPP fitting or .5” or 12.7 mm JIC #10
fitting. Weight 2.6 lb Box size = 13.5”x 3” x 3
On-road vehicles with 4-cylinder and small
6-cylinder engines. Small mobile and
stationary equipment.
On-road vehicles, small generators, marine
applications and agricultural applications
that use 6 cylinder and small 8-cylinder
engines. Most V-block engines require
two catalysts, one for each side of engine.
2. HBEN 2012
2” dia by 12” long
50.8 mm dia by 304.8 mm long
Inside fuel line diameter size max is .75” or 19
mm with a BSPP fitting or .5” or 12.7 mm JIC #10
fitting. Weight 2.7 lb.
Box size = 13.5”x 3” x 3
HBEN 3016
3” dia by 16” long
76.2 mm dia by 406.4 mm long
Inside fuel line diameter size max is 1.25” or
31.75 mm with a JIC #24 fitting, 1.125” or 28.57
mm with JIC #20 Box Size 18.5” x 4.25”
Weight 7.4 lb. Box Size 18.5” x 4” x 4”
HBEN 12505
1.25” dia by 5” long
31.75 mm dia by 127 mm long
Fuel line inside diameter max .3125 or 7.9mm.
Weight – 0.5 lb.
HBEN EMD RAILROAD
Large fuel consuming Off-road equipment.
Large fuel consuming generators and
marine applications. Designed for 8, 12,
16 and 20-cylinder engines. Most V-block
engines require two catalysts, one for each
side of engine.
Designed for Heavy Duty Off-Road
Equipment, large marine applications,
large stationary application and large
power generators. Designed for large
consuming engines with inside fuel line
diameters up to 1.25 inches or 31.75 mm.
V-block engines require two catalysts, on
for each side of engine.
Small furnace, cell towers and small diesel
engines.
EMD locomotive and marine engine
applications. One catalyst is located on
each injector.
1.25” dia by 5” long
31.75 mm dia by 127 mm long
Comes with standard 1/8” NTP fitting
Weight 1.5 lb.