Solar PV Power Plant with High Energy Storage battery

1. Presentation Merging with Technologies July 2017
Safe Practice in Earthing and Protection for Solar
Ground Mounted Solar PV Power Plant
Roof Top Solar PV Power Plant
Hybrid Wind and Solar PV Power Plant
High Enegy Battery Storage and Solar PV
DG Power Plant and Solar PV
Cannal TOP Solar PV Power Plant
Water Floating Solar PV Power Plant

2. Generation Of Power

3. Energy Storage and Distribution Systems

4. Energy Storage and Utilization

7. High Energy Storage Battery Power Plant

8. High Energy Storage Battery Power Plant

9. High Energy Storage Battery Power Plant

10. High Energy Storage Battery Power Plant

14. High Energy Storage Power Plant

15. Selection of Battery

16. Considering of Battery

17. Solar PV and Battery Charges

18. Battery Market Supply Chain

19. High Energy Battery Supply in MW

20. High Energy Battery and MW Capacity

30. Follow Safety in Electrical Instalation Shocks

31. Protection from Lightning Charges

32. Surge in Systems and Result

33. Surge in DC Application

35. Transient in your Circuit

37. Copper Clad Steel Solid ROD and Conductor

40. Most Efficient JointProcess
It is efficient and superior to all existing surface –to-surface
mechanical retention connectors.

41. What is Exothermic Welding System?
Copper to Bi-Metal and Alumenium
Types of Exothermic Joints:
Possible to join any bi metal except aluminum
Exothermic welding is a process of making maintain free highly molecular bonding process is superior in
performance connection to any known mechanical or compression-type surface-to-surface contact connector.
Exothermic weld connections provide current carrying (fusing) capacity equal to that of the conductor and will
not deteriorate with age.
 It offers Electrical connections between two or more copper to copper and copper to steel conductors.
 Highly portable method as it does not require any external power source or heat source, so it can be done
almost anywhere.
 It provides strong permanent molecular bond among metallic conductors that cannot loosen and further will
not deteriorate with age.
 Connection does not corrode with time and it offers permanent conductivity.

42. An Arcing Fault is the flow of current through
the air between phase conductors or phase
conductors and neutral or ground. Concentrated
radiant energy is released at the point of arcing
an a small amount of time resulting
in Extremely High Temperature.

43. Fire Accident Due to Lightning
We Want India Safe Practice Earthing and
Protection

44. Why Accidents happen?
Accidents generally happen due to lack of
maintenance, lack of Supervision, lack of knowledge,
over confidence and negligence. Accidents may also
happen due to one or more of the following reasons:
 Using improper tools
 Improper/non usage of protective devices
 Lack of proper instructions and supervision
 Mental/physical condition of the employee
 Poor Judgment

45. JMV LPS Products

47. Copper Cladded Conductor For Electrical
Installation
The Copper Clad Steel Grounding Conductor is made up of steel with the coating of 99.99% pure copper. These
conductors/ wires
or strands are equipped with the strength of steel with the conductivity and copper with the better corrosion
resistance property. The concentric copper cladding is metallurgic ally bonded to a steel core through a continuous,
solid cladding process using pressure rolling for primary bonding. The copper cladding
thickness remains constant surrounding steel. We use different steel grades for the steel core result in Dead Soft
Annealed, High strength and Extra High Strength Characteristics.
The Copper Clad Steel Wire yields a composite conductivity of 21%, 30% and 40% IACS, and available in Annealed
and Hard drawn. We are delivering products with varied conductivity and tensile strength as per the customer need.
Further, the wire can be processed to be silver plated or tinned copper clad steel wire.

48. Most Efficient JointProcess
It is efficient and superior to all existing surface –to-surface
mechanical retention connectors.

49. What is Exothermic Welding System?
Copper to Bi-Metal and Alumenium
Types of Exothermic Joints:
Possible to join any bi metal except aluminum
Exothermic welding is a process of making maintain free highly molecular bonding process is superior in
performance connection to any known mechanical or compression-type surface-to-surface contact connector.
Exothermic weld connections provide current carrying (fusing) capacity equal to that of the conductor and will
not deteriorate with age.
 It offers Electrical connections between two or more copper to copper and copper to steel conductors.
 Highly portable method as it does not require any external power source or heat source, so it can be done
almost anywhere.
 It provides strong permanent molecular bond among metallic conductors that cannot loosen and further will
not deteriorate with age.
 Connection does not corrode with time and it offers permanent conductivity.

51. Products Manufacture by JMV LPS
BRADELY BRAND

53. Innovation Never Stop(Cable Joints)

54. Creditial Client List & Corportae Office

55. Neeraj Saini – 9910398538
Rahul Verma – 9910398535
Manav Chandra - 9910398999
manav@jmv.co.in