Sunny is a light following robot designed by Adama Robotics. We have designed the manual for beginners who want to learn about Robotics. For more information: https://www.adamarobotics.com Sunny Kit contains: - Arduino Uno - LDR sensors - Chassis - DC Motors - Breadboard (prototyping) - Screws - Wires

1. Adama Robotics
Sunny
Handbook-Makeyourrobot
User Manual

2. I’m here to guide you to make your first robot!

4. LDR Sensor
Wheel
Chassis
Arduino
Motor Driver
DC Motor
Breadboard
Jumper Wires
Resistors

5. This are your robot's eyes
It’s fairly small and helps the robot move.
LDR Sensors
(Light Dependent Resistors)

6. This is your robot's chest!
It’s called a breadboard

7. It’s tiny and powerful!
This is your robot's brain
Arduino

8. Resistors have to be connected with the breadboard.
Resistors
breadboard

9. These are your robot’s legs
A motor and a wheel

10. Brain would have to be connected using Jumper
Wires

11. The legs will have to be connected with the brain
Brain is going to send signal to move around

12. Let’s give the brain some instructions so that it can work.

13. You can download the program from here.
But for that we will have to download the Arduino IDE.

14. After downloading, Open the
Arduino IDE.
Then you can type the code in by
yourself; or you can download it
from our website.
More instructions are given
there.

15. Now we can connect the components together.
On the next page, there is a Schematics which
will show you how to connect the components.

16. Connect your components according to the Schematics below.

17. Don’t be afraid!
Start with the first one! And slowly you
will get the hang of it.
Try to connect like the Schematics.

18. Play with your new friend Sun-E !