This is the manual for Skippy-Obstacle Avoidance Robot of Adama Robotics. For more information: Visit us at https://www.adamarobotics.com Skippy Kit contains: - Arduino Uno - Breadboard - Wires - DC Motors - Chassis - Screws - Ultrasonic Sensor - HC -SR04 - Battery

1. Adama Robotics
Skippy
Handbook-Makeyourrobot
User Manual

2. I’m here to guide you to make your first robot!
2

3. 3

4. Sensor
Wheel
Arduino
Motor Driver
DC Motor
Breadboard
4

5. This is your robot's eyes
It’s small and cute
5

6. It’s tiny and powerful!
This is your robot's brain
6

7. This is your robot's chest!
It’s called a breadboard
7

8. These are your robot’s legs
A motor and a wheel
8

9. Brain would have to be connected using
Jumper Wires
9

10. The legs will have to be connected with the brain
Brain is going to send signal to move around
10

11. Let’s give the brain some instructions so that it can work.
11

12. You can download the program from here.
But for that we will have to download the Arduino IDE.
12

13. After downloading, Open the
Arduino IDE.
Then you can type the code in by
yourself; or you can download it
from our website.
www.adamarobotics.com/skippy-code
More instructions are given
there.
13

14. Now we can connect the components together.
On the next page, there is a Schematics which
will show you how to connect the components.
14

15. Connect your components according to the Schematics below.
15

16. Don’t be afraid!
Start with the first one! And slowly you
will get the hang of it.
Try to connect like the Schematics.
16

17. Play with your new friend Skipp-E !
17