Liberty Herbicide, containing LibertyLink trait technology, provides post-emergent control of broadleaf and grass weeds - including glyphosate and multiple herbicide classes. For more information, visit: http://www.bayercropscience.us/products/traits/libertylink/ http://www.bayercropscience.us/products/herbicides/liberty/

1. APPLICATION GUIDELINES
Liberty®
is a nonselective contact herbicide that provides
postemergence control of broadleaf and grass weeds, including
weeds resistant to glyphosate and multiple herbicide classes.
Liberty is a Group 10 herbicide mode of action.*
For varieties containing LibertyLink®
technology
The LibertyLink trait technology is available in select
FiberMax®
and Stoneville®
cottonseed varieties.
Herbicide Recommendations for LibertyLink Cotton
Weed Control
Program
1st Post Application
(Emergence to 14 days or
when weeds are no more
than 3 to 4 inches)
2nd Post Application
Residual pre-emergence,
PPI or at planting
Liberty at 29 fl oz/A
plus residual herbicide
If needed, Liberty
at 29 fl oz/A
Environmental
conditions prevent
timely application
Liberty at 43 fl oz/A plus
residual herbicide
Liberty at 29 fl oz/A
applied 10 days after the
first application
1. Start Clean. Start with a clean, weed-free field by using an effective
burndown application or conventional tillage.
2. Stay Clean. Use an overlapping residual weed control program.
Be aggressive with early season weed management to avoid yield loss
and weed escapes. Residual herbicides applied at burndown, pre-
emergence and/or tankmixed in the first post application help ensure
optimal weed management, particularly if environmental conditions delay
timely post applications. Consider expected weed species as well as
environmental variables when selecting a residual herbicide.
3. Maximum Seasonal Use Rate: Up to 72 fl oz/A or 87 fl oz/A
4. Additional Use Directions:
a. If environmental conditions prevent timely application, a third application
of 29 fl oz/A can also be made on an as-needed basis, only if the
previous two applications did not exceed 29 fl oz/A on either application.
b. On GlyTol®
LibertyLink cotton, Liberty and glyphosate tankmixes may
reduce overall weed control.
c. Full rates of Liberty are recommended regardless of tankmix herbicide.
d. Make all applications when wind speeds are less than 10 mph, and
not during periods of temperature inversions.
e. Consult product label for full use directions, tankmix partners,
restrictions and maximum seasonal use guidelines.
*Herbicide mode of action groups designated by the Weed Science Society of America.

2. Bayer CropScience LP, 2 T.W. Alexander Drive, Research Triangle Park, NC 27709. Always read and
follow label instructions. Bayer, the Bayer Cross, FiberMax, GlyTol, Liberty, LibertyLink, Stoneville
and the Water DropletDesign are registered trademarks of Bayer. Liberty is not registered in all states.
AirMix, TurboDrop and TwinFan are trademarks of Agrotop. Albuz, Guardian, Total Range and Variable
Pressure are trademarks of Hypro. TeeJet, Turbo TwinJet, VisiFlo and XR TeeJet are trademarks
of Spraying Systems Co. VanTarget is a trademark of SprayTarget. For additional product information
call toll-free 1-866-99-BAYER (1-866-992-2937) or visit our website at www.BayerCropScience.us
CR0212LIBERTA010V03R0
Mixing Instructions
1. Start with properly calibrated
and cleaned equipment.
2. Fill spray tank half full with water.
3. Start agitation.
4. Add tankmix partner.
5. Complete filling spray tank with water.
6. Add Liberty and continue agitation.
7. If foaming occurs, use a silicone-
based antifoam agent.
For more information on Liberty, talk to your retailer
or Bayer CropScience sales representative or visit
BayerCropScience.us
Use Directions
Rate
• 29 fl oz/A
• Up to 43 fl oz/A if environmental conditions prevent timely
application resulting in large weeds or heavy infestation
Application Window • Emergence up to 70 days before harvest.
Spray Volume •15 GPA of water
• If dense weed canopy, increase water volume
Droplet Size • Medium (250 microns to 350 microns)
Rainfast • 4 hours
Wind Speed • Less than 10 mph
Pre-harvest Interval • 70 days
How to Spray
As a contact herbicide, following application guidelines is important to ensure
adequate coverage and maximum weed control.
• Use nozzles and pressure that generate medium-size (250 microns to 350
microns) spray droplets.
Nozzle recommendations:
- Spraying Systems: TeeJet®
VisiFlo®
Flat, XR TeeJet Extended Range Flat
or Turbo TwinJet®
Flat spray tips
- Greenleaf Technologies: TurboDrop®
XL, TurboDrop TwinFan®
or AirMix®
spray tips
- Hypro: Guardian™
,Variable Pressure™
,Total Range™
or Albuz®
AXI spray tips
- Delavan AgSpray: VariTarget™
Refer to nozzle manufacturers’ catalogs, tech sheets or websites for additional guidance.
• Apply Liberty at 15 GPA of water; increase water if dense weed
canopy exists.
• Apply at ground speed of less than 15 mph to attain adequate coverage.
• Do not apply when wind speeds are greater than 10 mph.
• Add tankmix partner, if needed.
IMPORTANT: This bulletin is not intended to provide adequate information for use
of this product. Read the label before using this product. Observe all label directions
and precautions while using this product.