Thirteen (13) years of experience in piping engineering work for oil and gas, chemical, petrochemical and power plant industries. The experience covers both onshore and offshore works for feasibility study, conceptual design, basic engineering, and detail design and administration of 3D CAD tools (PDMS, E3D, SP3D, PDS). I have been involved and worked in overseas such as: Japan, Brazil and Malaysia. Positions of Responsibility are Piping Engineer / PDMS Administrator in TechnipFMC. Experience in various position including: Piping Engineer, Piping Designer, PDMS administrator, E3D Administrator, SP3D Administrator. Knowledge in international codes and standards like ASME, API, ASTM, Shell DEP.

1. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 1 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Profile
Thirteen (13) years of experience in piping engineering work for oil and
gas, chemical, petrochemical and power plant industries. The
experience covers both onshore and offshore works for feasibility
study, conceptual design, basic engineering, and detail design and
administration of 3D CAD tools (PDMS, E3D, SP3D, PDS).
I have been involved and worked in overseas such as: Japan, Brazil
and Malaysia.
Positions of Responsibility are Piping Engineer / PDMS Administrator
in TechnipFMC. Experience in various position including: Piping
Engineer, Piping Designer, PDMS administrator, E3D Administrator,
SP3D Administrator.
Knowledge in international codes and standards like ASME, API,
ASTM, Shell DEP
Two (02) years in planning maintenance a machine and responsible for
maintenance all kinds of machines at plant.
Main projects
Highlight of major green field projects as lead engineer includes:
- The Al Shaheen Phase 2 Field Development Project for offshore
Qatar – Detailed Engineering
- CRD TLWP Subsea project – FEED and Detailed Engineering
- Dinh Co LPG project – Detailed Engineering
- Huntsman VIP project – FEED and Detailed Engineering
- Su Tu Trang Platfom project – Detailed Engineering
- Thien Ung BK-TNG Platform – FEED and Detailed Engineering
- Su Tu Nau Platfom project – Detailed Engineering
- ThangLong – DongDo – Detailed Engineering Design
- Rubby -B – Detail Engineering
- KNOC Extend Cooler– Detail Engineering
Education
Bachelor’s Degree in Machanical
Engineering, Ho Chi Minh City
University of Technical Eduacation
Professional Qualifications /
Registration
 PDMS certificate - AVEVA
 SP3D certificate - INTERGHAPH
 ISO certificate
 Certificate of Lean Six Sigma
101, 201 and 301 from
TechnipFMC University
Nationality
 Vietnam
Languages
 English, Good
 Vietnamese, Fluent
Year of Birth
 1981
Experience in Software
 PDMS
 E3D
 SP3D
 PDS
 Autocad
Position : Piping Engineer / PDMS Administrator
Email: khanhhcq81@gmail.com
Phone: +84909316341
Hoang Cong Quoc Khanh

2. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 2 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Detailed background
Period Company Name Position Held
06/2010 – Present Technip Engineering (Vietnam) Ltd Piping Engineer / PDMS Administrator
05/2009 – 05/2010 Shinsei Vietnam Engineering Co.,Ltd Piping & PDMS Engineer
03/2008 – 04/2009 Toyo Engineering Corporation (Brasil) PDMS Designer
03/2006 – 02/2008 Cactus Engineering Co., Ltd PDMS Designer
05/2004 – 02/2006 United Packing Joint Stock Company Mechanical Engineer
Work history with TechnipFMC(since 2010)
11/2018 –
06/2019
Client: NORTH OIL COMPANY (NOC).
Project Title /
Description:
The Al Shaheen Phase 2 Field Development Project for offshore Qatar –
Detailed Engineering
Project Position: E3D Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Software set up and configuration of full Aveva applications suite
 Creation and setting up E3D Project and provide respective access
controls
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
 3D modeling of equipment, Design routing of pipe based on the P&ID
 Prepare for the General Arrangement (GA) drawings
 Prepare for piping weight control report
 Customized E3D MDS (multi disciplinepipe support) system to suitproject
pipe supports standards
 Prepared daily review model file (3D walk through) for client review
 Interface between Structural BOCAD model with E3D model
04/2018 –
10/2018
Client: Japan Vietnam Petroleum Company (JVPC).
Project Title /
Description:
Whp-E1 Slot Extension Verification Engineering
Project Position: PDMS Administrator/ Piping Designer
Responsibilities: Responsible for piping detail engineering package comprising of:
 Software set up and configuration of full Aveva applications suite
 Creation and setting up PDMS Project and provide respective access
controls
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
 3D modeling of equipment, Design routing of pipe based on the P&ID
 Prepare for the General Arrangement (GA) drawings
 Prepare for piping weight control report

3. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 3 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
 Prepared daily review model file (3D walk through) for client review
 Platform site survey & report
10/2017 –
03/2018
Client: Talisman Vietnam 07/03 B.V.
Project Title /
Description:
Ca Rong Do TLWP Project for:-
 Suppy of flexible reisers, Pipelines & SSIV Skid
Project Position: PDMS Administrator/ Piping Designer
Responsibilities: Responsible for piping detail engineering package comprising of:
 Software set up and configuration of full Aveva applications suite
 Creation and setting up PDMS Project and provide respective access
controls
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
 3D modeling of equipment, Piping
 Prepare for the General Arrangement (GA) drawings
 Prepare for piping weight control report
 Prepared daily review model file (3D walk through) for client review
 Daily project back-up procedures and DICE and Datacon check
09/2016 –
09/2017
Client: PetroVietnam Gas (PVGAS).
Project Title /
Description:
Dinh Co LPG Project for:-
 Enhanced LPG recovery project
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Software set up and configuration of full Aveva applications suite
 Creation and setting up PDMS Project and provide respective access
controls
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
 Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
 Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
 Extract Material Take-Off Report, Bolt Summary Report
 Prepare for the General Arrangement (GA) drawings
 Prepared daily review model file (3D walk through) for client review
 Daily project back-up procedures and DICE and Datacon check
02/2016 –
08/2016
Client: Huntsman (Singapore) Pte.Ltd.
Project Title /
Description:
Huntsman VIP Projectfor:-
 P&ID of production and utilities
 Steel structure for blender and reactor,civil for equipmentfoundationand
separation wall (door)
 Equipment, Piping layout
 Equiment, Piping specification
 HVAC, dust collection system and local ventilation
 Electric and MCC, instrumentation and control system

4. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 4 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Software set up and configuration of full Aveva applications suite
 Creation and setting up PDMS Project and provide respective access
controls
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
 Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
 Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
 Extract Material Take-Off Report, Bolt Summary Report
 Prepare for the General Arrangement (GA) drawings
 Prepared daily review model file (3D walk through) for client review
 Daily project back-up procedures and DICE and Datacon check
03/2015 –
01/2016
Client: Cuu Long Joint Operating Company
Project Title /
Description:
Su Tu Trang full field development – phase 1
Detailed engineering and procurementengineering supportservices:-
 Detail design for wellhead platform ST-PIP, Living quarter ST-LQ &
WHP-C
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Software set up and configuration of full Aveva applications suite
 Creation and setting up PDMS Project and provide respective access
controls
 Coordinate with Project Engineer/Lead Engineer in the planning and
development of 3D PDMS engineering documents, engineering
schedules and monitoring of these document
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
 Prepared 3D Model Project Implementation Procedures and local work
instructions
 Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
 Import Structural BOCAD model into PDMS model
 Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
 Perform clash checks and making line consistencyclear, generate clash
plot and reports
 Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
 Prepare for the General Arrangement (GA) drawings
 Prepared daily review model file (3D walk through) for client review
 Daily project back-up procedures and DICE and Datacon check
04/2014 –
02/2015
Client: VIETSOPETRO Company
Project Title /
Description:
 Detail Engineering Service for BK-TNG Wellhead Platform
Project Position: SP3D Administrator

5. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 5 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Responsibilities: Responsible for piping detail engineering package comprising of:
 Overall 3D model management and quality assurances related to 3D
modeling by all disciplines
 Managing permission groups and levels of access for the project
 Focal Point for all disciplines related to 3D MODEL
 Document scope of modeling by disciplines
 Creation/maintenance/modifications of specifications and components in
the Catalogue Database
 Flow of general information to and from designers/drafters and LD’s
 Managing “To-do list” activities to check inconsistent data in 3D models
for every disciplines
 Prepare the SPR review for client review
 Batch generation and extraction of drawings and reports
 Backup and archiving of S3D database
04/2013 –
04/2014
Client: Cuu Long Joint Operating Company
Project Title /
Description:
 Su Tu Field Development – Su Tu Nau Wellhead Platforms and Pipelines
EPCI Contract
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Software set up and configuration of full Aveva applications suite
 Creation and setting up PDMS Project and provide respective access
controls
 Coordinate with Project Engineer/Lead Engineer in the planning and
development of 3D PDMS engineering documents, engineering
schedules and monitoring of these document
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
 Prepared 3D Model Project Implementation Procedures and local work
instructions
 Customized MDS (multi discipline pipe support) system to suitprojectpipe
supports standards
 Import Structural TEKLA model into the PDMS model
 Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
 Perform clash checks and making line consistencyclear, generate clash
plot and reports
 Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
 Prepare for the General Arrangement (GA) drawings
 Prepared daily review model file (3D walk through) for client review
 Daily project back-up procedures and DICE and Datacon check
06/2012 –
03/2013
Client: Petronas Carigali Company
Project Title /
Description:
 FEED and EPCIC of SK316 Development Project
Project Position: PDMS Administrator
Responsibilities: Responsible for piping engineering package comprising of:

6. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 6 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, and Catalogue
 Import Structural BOCAD model into the PDMS model
 Perform clash checks and making line consistencyclear, generate clash
plot and reports
 Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
 Prepared daily review model file (3D walk through) for client review
 Daily project back-up procedures and DICE and Datacon check
12/2011 –
05/2012
Client: LAMSON Join Operating Company
Project Title /
Description:
 ThangLong – DongDo Detailed Engineering Design
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Software set up and configuration of full Aveva applications suite
 Creation and setting up PDMS Project and provide respective access
controls
 Coordinate with Project Engineer/Lead Engineer in the planning and
development of 3D PDMS engineering documents, engineering
schedules and monitoring of these document
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, MDS setup and Catalogue
 Import Structural BOCAD model into the PDMS model
 Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
 Perform clash checks and making line consistencyclear, generate clash
plot and reports
 Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports
 Prepare for the General Arrangement (GA) drawings
 Prepared daily review model file (3D walk through) for client review
 Daily project back-up procedures and DICE and Datacon check
02/2011 –
11/2011
Client: KNOC (Korea National Oil Corporation)
Project Title /
Description:
 Detailed Engineering For Booster Compressor
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Software set up and configuration of full Aveva applications suite
 Creation and setting up PDMS Project and provide respective access
controls
 Prepare Administration activities of 3D PDMS software database
management, Draft setup, Isodraft Setup, Catalogue
 Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
 Perform clash checks and making line consistencyclear, generate clash
check report
 Extract Material Take-Off Report, Bolt Summary Report and also Centre
of Gravity (COG) reports

7. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 7 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
 Prepare for the General Arrangement (GA) drawings
 Prepared daily review model file (3D walk through) for client review
 Daily project back-up procedures and DICE and Datacon check
03/2011 –
08/2011
Client: VIETSOPETRO Company
Project Title /
Description:
 ThienUng FEED Project
Project Position: Piping Designer / Smart Plant Marine Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Coordinate with Administrator in Technip Malaysia to prepare
Administration activities of Smart Plant Marine software database
management, Draft setup, Isodraft Setup, Spec and Catalogue
 Design routing of pipe based on the P&ID
 Select pipe supports and model support
 3D modeling of equipment, nozzles orientation
 Extract & check Isometric drawings
 Extract Material Take-Off Report
 Prepare for the General Arrangement (GA) drawings
03/2011 –
08/2011
Client: PCVL (PETRONAS VIETNAM)
Project Title /
Description:
 RBDP-A Gaslift Upgrading Project
Project Position: Piping Designer / PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Manage PDMS model database and PDMS user
 Develop and manage PDMS Catalogue & Specifications
 Update design database by migrate the previous model (Post AFC)
changes into current model
 Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
 Design routing of pipe based on the P&ID, and Platform site survey
 Perform clash checks and making line consistencyclear, generate clash
plot and reports
 Extract & check Isometric drawings
 Extract Material Take-Off Report, Bolt Summary
 Prepare for the General Arrangement (GA) drawings
10/2010 –
02/2011
Client: PCVL (PETRONAS VIETNAM)
Project Title /
Description:
 RBDP-B Gaslift Upgrading Project
Project Position: PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Manage PDMS model database and PDMS user
 Develop and manage PDMS Catalogue & Specifications
 Update design database by migrate the previous model (Post AFC)
changes into current model

8. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 8 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
 Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
 Perform clash checks and making line consistencyclear, generate clash
plot and reports
 Extract & check Isometric drawings
 Extract Material Take-Off Report, Bolt Summary
 Prepare for the General Arrangement (GA) drawings
 Prepare the review (3D walk through) for client review
06/2010 –
10/2010
Client: KNOC (Korea National Oil Corporation)
Project Title /
Description:
 Rong Doi Tay Field Development Project
Project Position: Piping Designer / PDMS Administrator
Responsibilities: Responsible for piping detail engineering package comprising of:
 Manage PDMS model database and PDMS user
 Develop and manage PDMS Catalogue & Specifications
 Update design database by migrate the previous model (Post AFC)
changes into current model
 Import Structural BOCAD model into PDMS model
 Design routing of pipe based on the P&ID
 Prepare the backing sheet drawing for Draft and Isometric drawing
extraction
 Perform clash checks and making line consistencyclear, generate clash
plot and reports
 Extract & check Isometric drawings
 Extract Material Take-Off Report,BoltSummaryreportand also Centre of
Gravity (COG) reports
 Prepare for the General Arrangement (GA) drawings
 Prepare the review (3D walk through) for client review
Previous history
SHINSEI VIETNAM EMGINEERING CO., Ltd (05/2009 – 05/2010)
Piping & PDMS Engineer
05/2009 – 05/2010 Client: Shintech Louisiana
Project Title /
Description:
Hydrochloric Acid Production, LLC
Project Position: PDMS Piping design engineer
Responsibilities:  Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
 Design routing of pipe based on the P&ID
 Select pipe supports and model support
 Perform clash checks and making line consistencyclear, generate clash
plot and reports
 Extract & check Isometric drawings
 Extract & check General Arrangement (GA) drawings
 Review Model such as Valve Operability, Maintainability, accessibility,
and constructibility by using the NAVISK WORK REVIEW Software

9. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 9 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
TOYO ENGINEERING CORPORATION (BRASIL) (03/2008 – 04/2009)
PDMS Designer
03/2008 – 03/2009 Client: PETROBRAS – Petroleo Brasileiro S.A, Brazil
Project Title /
Description:
RVP (MODERNIZATION OF HENRIQUE LAGE REFINERY )
Project Position: PDMS Designer
Responsibilities:  Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
 Design routing of pipe based on the P&ID
 Create and extract Spool drawings and Spool map drawings
 Extract and check Isometric drawings, Unit plot plan
 Preparing fabrication isometric drawings
 Select pipe supports and model support
CACTUS ENGINEERING CO., Ltd (03/2006 – 02/2009)
PDMS Designer
06/2007 – 02/2008 Client: Nippon / Chiyoda Co.,
Project Title /
Description:
GTL (Gas to Liquid)
Project Position: PDMS Designer
Responsibilities:  Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
 Design routing of pipe based on the P&ID
 Extract & check Isometric drawings, unit plot plan
 Extract & check General Arrangement (GA) drawings
01/2007 – 05/2007 Client: Shintech Engineering Co.,
Project Title /
Description:
MA2 (Boiler Plant)
Project Position: PDMS Designer
Responsibilities:  Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
 Extract & check Isometric drawings
 Extract & check General Arrangement (GA) drawings
 Prepare report clash check
10/2006 – 12/2006 Client: Shintech Engineering Co.,
Project Title /
Description:
VCM2 (Vinyl Chlorride Monomer)
Project Position: PDMS Designer

10. Confidentiality Class A - This document is TechnipFMC property and it is -together with the information it contains- confidential.
It shall not be used for any other purposes than those for which it was supplied and shall not be reproduced and/or
disclosed to any third party without TechnipFMC authorization. TechnipFMC All rights reserved.
Page 10 of 10
Rev. Date Originator Approved
21/06/19 HCQ Khanh KM Wong
Responsibilities:  Involved in PDMS design & drafting to modeling the 3D piping,equipment,
structure drawing
 Extract & check Isometric drawings
 Drafting of equipment layout, nozzle orientation
 Extract & check General Arrangement (GA) drawings
 Prepare report clash check
03/2006 – 08/2006 Client: Shinsei Giken Co.,
Project Title /
Description:
Piping training course (on the job training)
Project Position: Piping / PDMS Designer
Responsibilities:  Learn PDMS software from Japanese senior
 Learn the basics of piping and equipment components
 Prepare Isometric drawings based on piping plans
 To do various piping design around equipment
 Understand P&ID and standards (ASME, ANSI…)
UNITED PACKING JOINT STOCK Co., (05/2004 – 02/2006)
Mechanical Engineer
05/2004 – 02/2006 Client:
Project Title /
Description:
Project Position: Mechanical Engineer
Responsibilities:  Designing kinds of Moulds basing on customers’ need
 Managing Moulds
 Planning maintenance a machine and responsible for maintenance all
kinds of machines at plant