1. #46/19 Nammaiah maistry St,
New washermenpet,Chennai – 600081,
Tamilnadu, India
E-Mail: sathish_21981@yahoo.com
Mobile: +91-98415-11735
Objective:
To take up challenging position in an organization where my skills and knowledge be of
value in a competitive work environment. Be a part of an organization, which enables realization
of individual potential and capabilities.
Career summary:
B.E. – Specialized in Mechanical Engineering with 10 years of extensive experience
in production field of automotive assembly (Press shop , Blanking).
Core Competencies:
 Implementation of kaizen activities in shop floor & process.
 Appeared in ISO 9001 – 2000 & TS 16949 audits.
 Knowledge in FMEA & CONTROL PLAN.
 Preparation of work standard & work instruction from control plan.
 Reducing the rejection rate by improvising the rework method.
 Capacity study and cycle time for each line.
 Good hands on MS OFFICE for documents and presentation.
Professional Experience – SUNGWOO HITECH INDIA LTD (Formerly SGH,TSAL)
Designation: Sr.Engineer Duration: (12/2006 to 11/2009) (11/2010 toTill now)
In charge of Blanking Line (M/C) and Handling man power, machining activities for new
developments and modifications in existing equipment.
• Daily production planning and prioritizing the sequence of production.
• Responsible for Root cause identification, corrective action implementation and its
effectiveness monitoring for daily in house quality issues.
• Monitor production plan, optimize use of manpower, materials, machinery and methods.
• Prepare System Documents and Procedures related to Production as per the Hyundai 5star
audit.
• Monthly Press capacity planning analysis based on customer monthly plan.
• Encouraging the team members to actively participate in Employee involvement team
meetings for suggestions and implementation.
• Application of QC tools to reduce the internal problems
• Implementing TPM concepts in the machine to reduce the machine downtime.
• Preparation of work standards and work instructions
• Implementing ECO and Maintaining FIFO of ECO implemented components Raising
Engineering change request(ECR)
• Implementing 3M (Muda, Muri and Mura) , 3C & 5S in shop floor
Achievements:
• No line stoppage in weld shop assembly
• Department coordinator for TS16949,5 star audit and successfully completed..
• Cost saving of Rs.2.5 Cr/year through scrap utilization & end bit/sheet utilization
• Leader in implementing TPM activities & TFT.
• Received Cost Reduction Achievement Award –2013 & Best Performance for quality
improvement-2012.
• 'Best performer Award' for the year 2012-13.
Sathish. K

2. Professional Experience – UNIPRES INDIA PVT LTD
Designation: Asst.Engg (Press shop) Duration: 11/2009 to 12/2010
• Co-coordinating with the entire team to achieve the production target, Customer PPM,
Down-time reduction, cycle time reduction
• Conducted work study and elimininated unwanted motion using KANBAN system.
• Excellent organizing capability to meet the daily requirements of customer and daily
production schedule.
• Encouraging the team members to actively participate in Employee involvement team
meetings for suggestions and implementation.
• Application of QC tools to reduce the internal problems
• Implementing TPM concepts in the machine to reduce the machine downtime.
• Conducting failure analysis and taking adequate measures to rectify the same with the help of
Quality and Engineering departments.
• Preparation of Countermeasure for In-house & Customer Complaints to reduce with the
Implementation of Poke Yoke or with the Supportive department idea.
• Ensuring optimum On Job Trainings and promoting Multi Skill;
Professional Experience – National Institute of Ocean Technology
Designation: Project Engineer Duration: 11/2015 to 12/2006
• Monitoring and contract execution on fabrication,
• Machining activities for new developments and modifications in existing equipment.
• Attaining the project completion within the specified time target.
• NIOT software Package
• This is knowledge-based design software for providing information for designing underwater
components, and general engineering components and design calculations using Visual
basic 6.0
Academic Details:
• B.E (MECHANICAL) from Annamalai University – 6.29(OGPA), May 2004.
• HSLC from The Muthialpet HSS– 80.25 %, March 1999.
• SSLC from St.Peters HSS– 59.8 %, April 1997.
Personal Profile:
Date of Birth : 21/09/1981
Marital Status : Married
Languages known : Tamil, Telugu and English.
Declaration:
I hereby assure that the details furnished above by me are true to my knowledge.
Place: Chennai Yours faithfully,
Date: Sathish. K