ELECTRICAL ENGINEER

1. JEFFREY S. PEREA
Address: Blk 677 Choa Chu Kang Crescent #04-650, Singapore, 680677
Contact No: 86737976
E-mail: jeffer_son6882@yahoo.com
Philippine Passport Number: P1341916A
OBJECTIVE
To be associated with a well established company where I can acquire a challenging
career where my knowledge, skills and technical experience in electrical discipline can be
maximized so as to dedicate growth, development and excellence to the company
QUALIFICATIONS
10 years professional experience in the field of electrical engineering in various
outstanding industries and construction companies in the Philippines, Saudi Arabia, Qatar,
Abu Dhabi
Registered Electrical Engineer, REE;PRC License No. 0034593, Sept. 2004
Registered Master Electrician, RME; PRC License No. 0029361, Sept. 2004
WORK EXPERIENCE
November 6, 2015 – May 15, 2016, Electrical Supervisor
MIESCOR (MERALCO INDUSTRIAL ENGINEERING SERVICES CORPORATION
Sta. Rita, Batangas City, Philippines
Project: 450MW San Gabriel Combined Cycle Natural Gas-Fired Power Plant
 Leads a group of electricians responsible for termination of instrumentation and control cables,
low voltage to medium voltage power supply cables to various instruments, panelboards,
motors, lighting, power outlets, CCTV, telephone and paging system, fire fighting system and
other auxiliary system involved in the erection of gas and steam turbine in the power plant
 Supervises crews in all their activities at site for the optimum utilization of project resources
(tools, equipment, materials, data, and methodology) and for safe, high quality, on-time and
economical completion of work activities at all times
 Prepares work permit for specified work order to be performed at site and ensures strict
compliance to the work package as indicated in the permit
 Attends daily safety and health toolbox meetings, recommends job safety observation and
initiates on-site corrective and preventive measures for sloppy work and unacceptable behavior
 Enforces project policies against non-complying personnel and work tools and serious safety
violations
 Signs-off work packages, checklist and other field documents, where indicated
 Prepares daily time and accomplishment reports, as required by the field supervisor
March 12, 2014 – September 12, 2014, Electrical Engineer for Water and Wastewater
Systems
PALAU PUBLIC UTILITIES CORPORATION
Koror, Republic of Palau
 Manages and maintains the electrical systems at Water and Wastewater Treatment Plants
 Installs, repairs and troubleshoots rotating machinery, power relays, control systems, and water
flow control systems to keep the waste water plant functioning normally, safely and efficiently

2.  Installs and maintains electrical communication systems between various areas of the waste
water treatment plant, including monitoring signals from various pieces of equipment throughout
the plant to make sure each component is functioning correctly
 Plans, designs, tests and installs electrical supply systems such as water pumps and other
electronic components as required
 Estimates the time and cost of projects
 Supervises operation and maintenance staff
 Designs and produces drawings of electrical systems based on calculations, design the type
and arrangement of circuits, transformers, circuit breakers, transmission lines and equipment
 Prepares and interprets specifications, drawings and regulations for the use of electrical
equipment
 Works out delivery and installation schedules for electrical equipment to ensure completed
works meet specifications and safety standards
 Designs and installs control and signaling devices in the water supply and treatment network
May 23, 2010 – August 6, 2013, Electrical Engineer
DONGAH GEOLOGICAL ENGINEERING CO., LTD.
Projects :33km Doha North Sewerage and Microtunneling Pipe Jacking Works (Qatar)
Strategic Tunnel Enhancement Programme Deep Tunnel Sewer Project (Abu Dhabi)
Lusail Expressway Microtunneling Works (Qatar)
 Responsible for installation and set-up of electrical systems of Tunnel Boring Machines (RASA
and Herrenknecht Slurry Type and Kawasaki Conveyor Type) varying from 1m to 5m diameter
including Water Separation and Treatment Plant, Grouting Systems and Dewatering Facilities
 Performs installation of electrical equipment and machines involved in the microtunneling pipe
jacking works like power supply, transformers, distribution panelboards, motor control centers
 Responsible for making electrical drawings like grounding layout plan, distribution schematics,
single line diagrams and control diagrams
 Conducts site electrical inspections and rectifications of outstanding non conformances
 Responsible for maintenance of all electrical equipment and troubleshooting of electrical
problems from minor scale to major scale problems
 Responsible for project management of all electrical installations based on approved standard
regulations like Kharamaa standards, Qatar Construction Specifications and British Standard for
Microtunneling
July 9, 2007 – February 9, 2010, Site Engineer
GULFNET KSASOLAR AND BATTERIES; Riyadh, Kingdom of Saudi Arabia
Project : GSM Sites Powered by Solar System
 Conducts installation, commissioning, maintenance, and troubleshooting of GSM
telecommunication equipment such as solar panels, charge regulator with inverter, battery
bank, fire alarm and fire fighting systems, access control systems, air conditioning units with
controls, water pumps with controls, exhaust fan units, lighting systems, main distribution panel
boards for AC and DC supply, etc.
 Conducts site planning and schedule of work implementation prior to commissioning of GSM
Site project
 Conducts installation and modification of all equipment in the GSM site as per standard
requirement of client, amongst are Saudi Telecommunications Company (STC), Saudi Railways
Organization, Etihad Etisalat Company (Mobily)
 Responsible for all telecom equipment initial start-up, testing and hand-over to the client
 Responsible for configuration and adjustments of necessary telecom parameters

3.  Conducts both site preventive maintenance to ensure optimum performance and reliability of all
telecom equipment and corrective maintenance to ensure that all equipment and external
alarms are working normally
 Makes site reports, maintenance reports and all necessary documents pertaining to site
planning, work execution, and site inspection
 Acts as a project engineer to a group of 8-10 subordinates
October 2004 – March 2007, Molding Manufacturing Engineer
EPSON PRECISION (PHILIPPINES), INC.;Lipa City, Batangas, Philippines
 Performs development projects leading to production line improvements, parts cost and
manpower reduction, downtime elimination and machine efficiency thru automation, line set-up,
process layouts, new process and/or technology introduction, operate injection molding
machines based on production requirement and quality standards; conduct machine preventive
and corrective maintenance, act as safety officer, environmental coordinator and purchase
officer
 Performs planned/scheduled improvements and/or development projects
 Initiates production line automation, maintenance and cost reduction activities
 Responsible in jigs/tools design specifications, fabrication, and process layouts
 Performs the operation of Injection Molding Machines, Mold Temperature Regulator,
Dehumidifier, Annealing Machine, and Water Chiller for the production of different printer parts
based on production control plan for clean room, semi-clean room and non-clean room
environment
 Executes maintenance and repair work order and maintenance systems procedures and
instructions for the breakdown and planned preventive maintenance schedule of utilities,
machineries and equipment
 Responsible for the machine/equipment condition monitoring, inspection and checking of
operational conditions
November 2002 – March 2003; Substation Maintenance
NATIONAL TRANSMISSION CORPORATION; Mahabang Parang, Batangas, Philippines
 Responsible in control room, switchboards and control panel monitoring, maintenance and
operation, 69kV and 230kV switchyard monitoring, maintenance and operation, maintains the
stability and performs necessary adjustments in substation system parameters, assists in
responding to abrupt power failures, fluctuations and scheduled power interruptions, conducts
periodic inspection and maintenance of substation instruments and equipment
TRAININGS AND SEMINARS ATTENDED
Working at Height
SIEMENS 450MW San Gabriel Project, Sta. Rita Batangas City; December 7, 2015
Short Course Computer Aided Design and Drafting
AMA Computer Learning Center, Batangas; April 13-27, 2015
Solar TechnologySeminar Workshop
Basic Photovoltaic (PV) System Design, Installation and Servicing
Data-Phil Technology Educators, Inc; December 18, 2014
Confined Space Entry
Venture Gulf Training Centre, Doha, Qatar; March 2, 2013

4. Occupational Health and Safety Awareness
Philippine Association of Safety Engineers; Doha, Qatar; March 4, 2011
Site Safety Awareness
Dongah, Doha, Qatar; November 29, 2010
Basic PLC (Programmable Logic Controller)
Sponsor: Keyence Singapore thru Epson Precision Philippines Inc.; Date: September 22, 2006
Introduction to QC Training
Epson Precision Philippines Inc.; November 9-11, 2005
Energy Saving in Pneumatic System
Epson Precision Philippines Inc.; July 8, 2005
Emergency Evacuation Orientation
Epson Precision Philippines Inc.; November 12, 2004
Robotics
Robautronix Corp. Philippines; March 3, 2004
Appreciation Course on Pneumatic Technology
Sintered Metal Corporation (SMC) Pneumatics Training Center; August 5, 2003
PERSONAL DATA
Date of Birth : June 08, 1982
Place of Birth : Batangas City, Philippines
Age : 34
Sex : Male
Civil Status : Married
Citizenship : Filipino
Height : 170cm
Weight : 65kg
Language/s Spoken : English, Filipino, Arabic
EDUCATIONAL BACKGROUND
TertiaryEducation Batangas State University
Bachelor of Science in Electrical
Engineering
Alangilan, Batangas City, Philippines, 4200
1999-2004
Secondary Education Pablo Borbon Memorial Institute of
Technology
Rizal Av., Batangas City, Philippines, 4200
1995-1999
Primary Education Batangas City South Elementary School
Batangas City, Batangas, Philippines, 4200
1989-1995